diff --git a/Marlin/pins_AZTEEG_X3_PRO.h b/Marlin/pins_AZTEEG_X3_PRO.h
index 53ecb4c18c17396fdea2f1208151144949adf940..0e76a2a232f44cbdd2ae368a074fd6e0ae0e4293 100644
--- a/Marlin/pins_AZTEEG_X3_PRO.h
+++ b/Marlin/pins_AZTEEG_X3_PRO.h
@@ -134,9 +134,9 @@
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#undef SD_DETECT_PIN
- #define SD_DETECT_PIN 49 // For easy adapter board
+ #define SD_DETECT_PIN 49 // For easy adapter board
#undef BEEPER_PIN
- #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display
+ #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display
#else
#define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE_PIN 35
@@ -146,9 +146,9 @@
// Misc. Functions
//
#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN
- #undef DOGLCD_A0 // steal pin 44 for the case light; if you have a Viki2 and have connected it
- #define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments
- // as the wiring diagram uses pin 44 for DOGLCD_A0
+ #undef DOGLCD_A0 // Steal pin 44 for the case light; if you have a Viki2 and have connected it
+ #define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments
+ // as the wiring diagram uses pin 44 for DOGLCD_A0
#endif
//
diff --git a/Marlin/pins_GEN6.h b/Marlin/pins_GEN6.h
index 10a285790dfe82192c4541299263abd5df605850..5611e4d92fa88a9fdae1200ba87de8641957822a 100644
--- a/Marlin/pins_GEN6.h
+++ b/Marlin/pins_GEN6.h
@@ -107,7 +107,7 @@
//
#define SDSS 17
#define DEBUG_PIN 0
-#define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM
+#define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM
// RS485 pins
#define TX_ENABLE_PIN 12
@@ -116,6 +116,6 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
-#define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown!
-#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM
+#define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown!
+#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 6
diff --git a/Marlin/pins_GEN7_CUSTOM.h b/Marlin/pins_GEN7_CUSTOM.h
index 9b83df9aeeaeb7e977df0e6c2ef706f91ab75344..d64e94e2d368586b3c3ffd51644740783844d296 100644
--- a/Marlin/pins_GEN7_CUSTOM.h
+++ b/Marlin/pins_GEN7_CUSTOM.h
@@ -96,14 +96,14 @@
// Heaters
//
#define HEATER_0_PIN 4
-#define HEATER_BED_PIN 3 // (bed)
+#define HEATER_BED_PIN 3 // (bed)
//
// Misc. Functions
//
-#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
+#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
#define PS_ON_PIN 19
-#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM
+#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM
// A pin for debugging
#define DEBUG_PIN -1
diff --git a/Marlin/pins_MEGATRONICS_3.h b/Marlin/pins_MEGATRONICS_3.h
index 5e4ca4b5864308380b234777068293d934682201..2ebb209bcbf324636ef57ecd8e209128218eb109 100644
--- a/Marlin/pins_MEGATRONICS_3.h
+++ b/Marlin/pins_MEGATRONICS_3.h
@@ -131,7 +131,7 @@
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
-#define CASE_LIGHT_PIN 45 // try the keypad connector
+#define CASE_LIGHT_PIN 45 // Try the keypad connector
//
// LCD / Controller
@@ -144,9 +144,9 @@
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
- #define LCD_PINS_RS 56 // CS chip select / SS chip slave select
- #define LCD_PINS_ENABLE 51 // SID (MOSI)
- #define LCD_PINS_D4 52 // SCK (CLK) clock
+ #define LCD_PINS_RS 56 // CS chip select / SS chip slave select
+ #define LCD_PINS_ENABLE 51 // SID (MOSI)
+ #define LCD_PINS_D4 52 // SCK (CLK) clock
#define SD_DETECT_PIN 35
#else
diff --git a/Marlin/pins_MIGHTYBOARD_REVE.h b/Marlin/pins_MIGHTYBOARD_REVE.h
index bd13a379d94281cce63f11ffd04150a20c061906..5b5d6e7ed1359bbaa331f34c36888a594506f8ab 100644
--- a/Marlin/pins_MIGHTYBOARD_REVE.h
+++ b/Marlin/pins_MIGHTYBOARD_REVE.h
@@ -64,20 +64,20 @@
//
// Servos
//
-#define SERVO0_PIN 36 // C1 (1280-EX1)
-#define SERVO1_PIN 37 // C0 (1280-EX2)
-#define SERVO2_PIN 40 // G1 (1280-EX3)
-#define SERVO3_PIN 41 // G0 (1280-EX4)
+#define SERVO0_PIN 36 // C1 (1280-EX1)
+#define SERVO1_PIN 37 // C0 (1280-EX2)
+#define SERVO2_PIN 40 // G1 (1280-EX3)
+#define SERVO3_PIN 41 // G0 (1280-EX4)
//
// Limit Switches
//
-#define X_MIN_PIN 49 // L0
-#define X_MAX_PIN 48 // L1
-#define Y_MIN_PIN 47 // L2
-#define Y_MAX_PIN 46 // L3
-#define Z_MIN_PIN 43 // L6
-#define Z_MAX_PIN 42 // L7
+#define X_MIN_PIN 49 // L0
+#define X_MAX_PIN 48 // L1
+#define Y_MIN_PIN 47 // L2
+#define Y_MAX_PIN 46 // L3
+#define Z_MIN_PIN 43 // L6
+#define Z_MAX_PIN 42 // L7
//
// Z Probe (when not Z_MIN_PIN)
@@ -89,25 +89,25 @@
//
// Steppers
//
-#define X_STEP_PIN 55 // F1
-#define X_DIR_PIN 54 // F0
-#define X_ENABLE_PIN 56 // F2
+#define X_STEP_PIN 55 // F1
+#define X_DIR_PIN 54 // F0
+#define X_ENABLE_PIN 56 // F2
-#define Y_STEP_PIN 59 // F5
-#define Y_DIR_PIN 58 // F4
-#define Y_ENABLE_PIN 60 // F6
+#define Y_STEP_PIN 59 // F5
+#define Y_DIR_PIN 58 // F4
+#define Y_ENABLE_PIN 60 // F6
-#define Z_STEP_PIN 63 // K1
-#define Z_DIR_PIN 62 // K0
-#define Z_ENABLE_PIN 64 // K2
+#define Z_STEP_PIN 63 // K1
+#define Z_DIR_PIN 62 // K0
+#define Z_ENABLE_PIN 64 // K2
-#define E0_STEP_PIN 25 // A3
-#define E0_DIR_PIN 24 // A2
-#define E0_ENABLE_PIN 26 // A4
+#define E0_STEP_PIN 25 // A3
+#define E0_DIR_PIN 24 // A2
+#define E0_ENABLE_PIN 26 // A4
-#define E1_STEP_PIN 29 // A7
-#define E1_DIR_PIN 28 // A6
-#define E1_ENABLE_PIN 39 // G2
+#define E1_STEP_PIN 29 // A7
+#define E1_DIR_PIN 28 // A6
+#define E1_ENABLE_PIN 39 // G2
//
// I2C Digipots - MCP4018
@@ -115,17 +115,17 @@
// Set from 0 - 127 with stop bit.
// (Ex. 3F << 1 | 1)
//
-#define DIGIPOTS_I2C_SCL 76 // J5
-#define DIGIPOTS_I2C_SDA_X 57 // F3
-#define DIGIPOTS_I2C_SDA_Y 61 // F7
-#define DIGIPOTS_I2C_SDA_Z 65 // K3
-#define DIGIPOTS_I2C_SDA_E0 27 // A5
-#define DIGIPOTS_I2C_SDA_E1 77 // J6
+#define DIGIPOTS_I2C_SCL 76 // J5
+#define DIGIPOTS_I2C_SDA_X 57 // F3
+#define DIGIPOTS_I2C_SDA_Y 61 // F7
+#define DIGIPOTS_I2C_SDA_Z 65 // K3
+#define DIGIPOTS_I2C_SDA_E0 27 // A5
+#define DIGIPOTS_I2C_SDA_E1 77 // J6
//
// Temperature Sensors
//
-#define TEMP_BED_PIN 69 // K7
+#define TEMP_BED_PIN 69 // K7
// SPI for Max6675 or Max31855 Thermocouple
// Uses a separate SPI bus
@@ -135,10 +135,10 @@
// 2 E4 CS2
// 78 E2 SCK
//
-#define THERMO_SCK_PIN 78 // E2
-#define THERMO_DO_PIN 3 // E5
-#define THERMO_CS1 5 // E3
-#define THERMO_CS2 2 // E4
+#define THERMO_SCK_PIN 78 // E2
+#define THERMO_DO_PIN 3 // E5
+#define THERMO_CS1 5 // E3
+#define THERMO_CS2 2 // E4
#define MAX6675_SS THERMO_CS1
#define MAX6675_SCK_PIN THERMO_SCK_PIN
@@ -150,10 +150,10 @@
// 2 extruders or 1 extruder and a heated bed.
// With no heated bed, an additional 24V fan is possible.
//
-#define MOSFET_A_PIN 6 // H3
-#define MOSFET_B_PIN 11 // B5 - Rev A of this file had this pin assigned to 9
-#define MOSFET_C_PIN 45 // L4
-#define MOSFET_D_PIN 44 // L5
+#define MOSFET_A_PIN 6 // H3
+#define MOSFET_B_PIN 11 // B5 - Rev A of this file had this pin assigned to 9
+#define MOSFET_C_PIN 45 // L4
+#define MOSFET_D_PIN 44 // L5
#if HOTENDS > 1
#if TEMP_SENSOR_BED
@@ -195,43 +195,43 @@
//
// Extruder Auto Fan Pins
//
-#define ORIG_E0_AUTO_FAN_PIN 7 // H4
-#define ORIG_E1_AUTO_FAN_PIN 12 // B6
+#define ORIG_E0_AUTO_FAN_PIN 7 // H4
+#define ORIG_E1_AUTO_FAN_PIN 12 // B6
//
// Misc. Functions
//
-#define LED_PIN 13 // B7
-#define CUTOFF_RESET_PIN 16 // H1
-#define CUTOFF_TEST_PIN 17 // H0
-#define CASE_LIGHT_PIN 44 // L5 MUST BE HARDWARE PWM
+#define LED_PIN 13 // B7
+#define CUTOFF_RESET_PIN 16 // H1
+#define CUTOFF_TEST_PIN 17 // H0
+#define CASE_LIGHT_PIN 44 // L5 MUST BE HARDWARE PWM
//
// LCD / Controller
//
#ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
- #define LCD_PINS_RS 33 // C4, LCD-STROBE
- #define LCD_PINS_ENABLE 72 // J2, LEFT
- #define LCD_PINS_D4 35 // C2, LCD-CLK
- #define LCD_PINS_D5 32 // C5, RLED
- #define LCD_PINS_D6 34 // C3, LCD-DATA
- #define LCD_PINS_D7 31 // C6, GLED
+ #define LCD_PINS_RS 33 // C4: LCD-STROBE
+ #define LCD_PINS_ENABLE 72 // J2: LEFT
+ #define LCD_PINS_D4 35 // C2: LCD-CLK
+ #define LCD_PINS_D5 32 // C5: RLED
+ #define LCD_PINS_D6 34 // C3: LCD-DATA
+ #define LCD_PINS_D7 31 // C6: GLED
- #define BTN_EN2 75 // J4, UP
- #define BTN_EN1 73 // J3, DOWN
+ #define BTN_EN2 75 // J4, UP
+ #define BTN_EN1 73 // J3, DOWN
//STOP button connected as KILL_PIN
- #define KILL_PIN 14 // J1, RIGHT
+ #define KILL_PIN 14 // J1, RIGHT
//KILL - not connected
- #define BEEPER_PIN 8 // H5, SD_WP
+ #define BEEPER_PIN 8 // H5, SD_WP
- #define BTN_CENTER 15 // J0
- #define BTN_ENC BTN_CENTER
+ #define BTN_CENTER 15 // J0
+ #define BTN_ENC BTN_CENTER
//on board leds
- #define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2)
- #define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
+ #define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2)
+ #define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
#else
// Replicator uses a 3-wire SR controller with HD44780
@@ -239,29 +239,29 @@
//
#define SAV_3DLCD
- #define SR_DATA_PIN 34 // C3
- #define SR_CLK_PIN 35 // C2
- #define SR_STROBE_PIN 33 // C4
+ #define SR_DATA_PIN 34 // C3
+ #define SR_CLK_PIN 35 // C2
+ #define SR_STROBE_PIN 33 // C4
- #define BTN_UP 75 // J4
- #define BTN_DOWN 73 // J3
- #define BTN_LEFT 72 // J2
- #define BTN_RIGHT 14 // J1
- #define BTN_CENTER 15 // J0
- #define BTN_ENC BTN_CENTER
+ #define BTN_UP 75 // J4
+ #define BTN_DOWN 73 // J3
+ #define BTN_LEFT 72 // J2
+ #define BTN_RIGHT 14 // J1
+ #define BTN_CENTER 15 // J0
+ #define BTN_ENC BTN_CENTER
- #define BEEPER_PIN 4 // G5
+ #define BEEPER_PIN 4 // G5
- #define STAT_LED_RED_PIN 32 // C5
- #define STAT_LED_BLUE_PIN 31 // C6 (Actually green)
+ #define STAT_LED_RED_PIN 32 // C5
+ #define STAT_LED_BLUE_PIN 31 // C6 (Actually green)
#endif
//
// SD Card
//
-#define SDSS 53 // B0
-#define SD_DETECT_PIN 9 // H6
+#define SDSS 53 // B0
+#define SD_DETECT_PIN 9 // H6
#define MAX_PIN THERMO_SCK_PIN
@@ -275,9 +275,6 @@
-
-
-
// Check if all pins are defined in mega/pins_arduino.h
#include <Arduino.h>
static_assert(NUM_DIGITAL_PINS > MAX_PIN, "add missing pins to [arduino dir]/hardware/arduino/avr/variants/mega/pins_arduino.h based on fastio.h"
diff --git a/Marlin/pins_MINITRONICS.h b/Marlin/pins_MINITRONICS.h
index 43f63ab23123acc0b7b51a926efaba0cdb5a34ba..fbdf7cbb66ec06771879569aca75ba8fe4f24f13 100644
--- a/Marlin/pins_MINITRONICS.h
+++ b/Marlin/pins_MINITRONICS.h
@@ -104,9 +104,9 @@
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
- #define LCD_PINS_RS 15 // CS chip select /SS chip slave select
- #define LCD_PINS_ENABLE 11 // SID (MOSI)
- #define LCD_PINS_D4 10 // SCK (CLK) clock
+ #define LCD_PINS_RS 15 // CS chip select /SS chip slave select
+ #define LCD_PINS_ENABLE 11 // SID (MOSI)
+ #define LCD_PINS_D4 10 // SCK (CLK) clock
#define BTN_EN1 18
#define BTN_EN2 17
diff --git a/Marlin/pins_RAMBO.h b/Marlin/pins_RAMBO.h
index a317b1b7636e5766d2ec6da907fdae9814a655b1..268ebfefcb4fa71f0d9fa545396e76387f7e715b 100644
--- a/Marlin/pins_RAMBO.h
+++ b/Marlin/pins_RAMBO.h
@@ -151,12 +151,12 @@
#if ENABLED(NEWPANEL)
- #define LCD_PINS_RS 70
+ #define LCD_PINS_RS 70
#define LCD_PINS_ENABLE 71
- #define LCD_PINS_D4 72
- #define LCD_PINS_D5 73
- #define LCD_PINS_D6 74
- #define LCD_PINS_D7 75
+ #define LCD_PINS_D4 72
+ #define LCD_PINS_D5 73
+ #define LCD_PINS_D6 74
+ #define LCD_PINS_D7 75
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 44
@@ -202,12 +202,12 @@
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
- #define LCD_PINS_RS 75
+ #define LCD_PINS_RS 75
#define LCD_PINS_ENABLE 17
- #define LCD_PINS_D4 23
- #define LCD_PINS_D5 25
- #define LCD_PINS_D6 27
- #define LCD_PINS_D7 29
+ #define LCD_PINS_D4 23
+ #define LCD_PINS_D5 25
+ #define LCD_PINS_D6 27
+ #define LCD_PINS_D7 29
#endif // !NEWPANEL
diff --git a/Marlin/pins_RAMPS.h b/Marlin/pins_RAMPS.h
index 4939a2b245293929c7fc879a79ccf6eeefc91d6d..411e0f47cabe357ee611eb9929eb7ae87cdc8968 100644
--- a/Marlin/pins_RAMPS.h
+++ b/Marlin/pins_RAMPS.h
@@ -220,25 +220,25 @@
#if ENABLED(ULTRA_LCD)
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
- #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
- #define LCD_PINS_ENABLE 51 // SID (MOSI)
- #define LCD_PINS_D4 52 // SCK (CLK) clock
+ #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
+ #define LCD_PINS_ENABLE 51 // SID (MOSI)
+ #define LCD_PINS_D4 52 // SCK (CLK) clock
#elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
- #define LCD_PINS_RS 40
- #define LCD_PINS_ENABLE 42
- #define LCD_PINS_D4 65
- #define LCD_PINS_D5 66
- #define LCD_PINS_D6 44
- #define LCD_PINS_D7 64
+ #define LCD_PINS_RS 40
+ #define LCD_PINS_ENABLE 42
+ #define LCD_PINS_D4 65
+ #define LCD_PINS_D5 66
+ #define LCD_PINS_D6 44
+ #define LCD_PINS_D7 64
#else
- #define LCD_PINS_RS 16
- #define LCD_PINS_ENABLE 17
- #define LCD_PINS_D4 23
- #define LCD_PINS_D5 25
- #define LCD_PINS_D6 27
- #define LCD_PINS_D7 29
+ #define LCD_PINS_RS 16
+ #define LCD_PINS_ENABLE 17
+ #define LCD_PINS_D4 23
+ #define LCD_PINS_D5 25
+ #define LCD_PINS_D6 27
+ #define LCD_PINS_D7 29
#if DISABLED(NEWPANEL)
- #define BEEPER_PIN 33
+ #define BEEPER_PIN 33
// Buttons are attached to a shift register
// Not wired yet
//#define SHIFT_CLK 38
@@ -251,118 +251,125 @@
#if ENABLED(NEWPANEL)
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
- #define BEEPER_PIN 37
- #define BTN_EN1 31
- #define BTN_EN2 33
- #define BTN_ENC 35
+ #define BEEPER_PIN 37
- #define SD_DETECT_PIN 49
- #define KILL_PIN 41
+ #define BTN_EN1 31
+ #define BTN_EN2 33
+ #define BTN_ENC 35
+
+ #define SD_DETECT_PIN 49
+ #define KILL_PIN 41
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
#define LCD_BACKLIGHT_PIN 39
#endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
- #define BTN_EN1 64
- #define BTN_EN2 59
- #define BTN_ENC 63
- #define SD_DETECT_PIN 42
+
+ #define BTN_EN1 64
+ #define BTN_EN2 59
+ #define BTN_ENC 63
+ #define SD_DETECT_PIN 42
+
#elif ENABLED(LCD_I2C_PANELOLU2)
- #define BTN_EN1 47 // reverse if the encoder turns the wrong way.
- #define BTN_EN2 43
- #define BTN_ENC 32
- #define LCD_SDSS 53
- #define SD_DETECT_PIN -1
- #define KILL_PIN 41
+
+ #define BTN_EN1 47
+ #define BTN_EN2 43
+ #define BTN_ENC 32
+ #define LCD_SDSS 53
+ #define SD_DETECT_PIN -1
+ #define KILL_PIN 41
+
#elif ENABLED(LCD_I2C_VIKI)
- #define BTN_EN1 22 // reverse if the encoder turns the wrong way.
- #define BTN_EN2 7 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf
- // tells about 40/42.
- // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
- #define BTN_ENC -1
- #define LCD_SDSS 53
- #define SD_DETECT_PIN 49
+
+ #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
+ #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
+
+ #define BTN_ENC -1
+ #define LCD_SDSS 53
+ #define SD_DETECT_PIN 49
+
#elif ENABLED(VIKI2) || ENABLED(miniVIKI)
- #define BEEPER_PIN 33
+
+ #define BEEPER_PIN 33
// Pins for DOGM SPI LCD Support
- #define DOGLCD_A0 44
- #define DOGLCD_CS 45
+ #define DOGLCD_A0 44
+ #define DOGLCD_CS 45
#define LCD_SCREEN_ROT_180
- #define BTN_EN1 22
- #define BTN_EN2 7
- #define BTN_ENC 39
+ #define BTN_EN1 22
+ #define BTN_EN2 7
+ #define BTN_ENC 39
- #define SDSS 53
- #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
+ #define SDSS 53
+ #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
- #define KILL_PIN 31
+ #define KILL_PIN 31
- #define STAT_LED_RED_PIN 32
+ #define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE_PIN 35
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
- #define BTN_EN1 35 // reverse if the encoder turns the wrong way.
- #define BTN_EN2 37
- #define BTN_ENC 31
- #define SD_DETECT_PIN 49
- #define LCD_SDSS 53
- #define KILL_PIN 41
- #define BEEPER_PIN 23
- #define DOGLCD_CS 29
- #define DOGLCD_A0 27
+ #define BTN_EN1 35
+ #define BTN_EN2 37
+ #define BTN_ENC 31
+ #define SD_DETECT_PIN 49
+ #define LCD_SDSS 53
+ #define KILL_PIN 41
+ #define BEEPER_PIN 23
+ #define DOGLCD_CS 29
+ #define DOGLCD_A0 27
#define LCD_BACKLIGHT_PIN 33
#elif ENABLED(MINIPANEL)
- #define BEEPER_PIN 42
+ #define BEEPER_PIN 42
// Pins for DOGM SPI LCD Support
- #define DOGLCD_A0 44
- #define DOGLCD_CS 66
+ #define DOGLCD_A0 44
+ #define DOGLCD_CS 66
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
- #define SDSS 53
+ #define SDSS 53
- #define KILL_PIN 64
+ #define KILL_PIN 64
// GLCD features
- //#define LCD_CONTRAST 190
+ //#define LCD_CONTRAST 190
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
// The encoder and click button
- #define BTN_EN1 40
- #define BTN_EN2 63
- #define BTN_ENC 59
+ #define BTN_EN1 40
+ #define BTN_EN2 63
+ #define BTN_ENC 59
// not connected to a pin
- #define SD_DETECT_PIN 49
+ #define SD_DETECT_PIN 49
#else
// Beeper on AUX-4
- #define BEEPER_PIN 33
+ #define BEEPER_PIN 33
// buttons are directly attached using AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
- #define BTN_EN1 64 // encoder
- #define BTN_EN2 59 // encoder
- #define BTN_ENC 63 // enter button
- #define SHIFT_OUT 40 // shift register
- #define SHIFT_CLK 44 // shift register
- #define SHIFT_LD 42 // shift register
+ #define BTN_EN1 64
+ #define BTN_EN2 59
+ #define BTN_ENC 63
+ #define SHIFT_OUT 40
+ #define SHIFT_CLK 44
+ #define SHIFT_LD 42
#elif ENABLED(PANEL_ONE)
- #define BTN_EN1 59 // AUX2 PIN 3
- #define BTN_EN2 63 // AUX2 PIN 4
- #define BTN_ENC 49 // AUX3 PIN 7
+ #define BTN_EN1 59 // AUX2 PIN 3
+ #define BTN_EN2 63 // AUX2 PIN 4
+ #define BTN_ENC 49 // AUX3 PIN 7
#else
- #define BTN_EN1 37
- #define BTN_EN2 35
- #define BTN_ENC 31 // the click
+ #define BTN_EN1 37
+ #define BTN_EN2 35
+ #define BTN_ENC 31
#endif
#if ENABLED(G3D_PANEL)
- #define SD_DETECT_PIN 49
- #define KILL_PIN 41
+ #define SD_DETECT_PIN 49
+ #define KILL_PIN 41
#else
//#define SD_DETECT_PIN -1 // Ramps doesn't use this
#endif
diff --git a/Marlin/pins_SCOOVO_X9H.h b/Marlin/pins_SCOOVO_X9H.h
index a687c9728514aa287a2d27d68b51626f66c748f1..6b7cf4f800cf6089012d4639a2bc07288e946f79 100644
--- a/Marlin/pins_SCOOVO_X9H.h
+++ b/Marlin/pins_SCOOVO_X9H.h
@@ -126,21 +126,21 @@
//
// LCD / Controller
//
-#define LCD_PINS_RS 70 // Ext2_5
-#define LCD_PINS_ENABLE 71 // Ext2_7
-#define LCD_PINS_D4 72 // Ext2_9 ?
-#define LCD_PINS_D5 73 // Ext2_11 ?
-#define LCD_PINS_D6 74 // Ext2_13
-#define LCD_PINS_D7 75 // Ext2_15 ?
+#define LCD_PINS_RS 70 // Ext2_5
+#define LCD_PINS_ENABLE 71 // Ext2_7
+#define LCD_PINS_D4 72 // Ext2_9 ?
+#define LCD_PINS_D5 73 // Ext2_11 ?
+#define LCD_PINS_D6 74 // Ext2_13
+#define LCD_PINS_D7 75 // Ext2_15 ?
#define BEEPER_PIN -1
-#define BTN_HOME 80 // Ext_16
-#define BTN_CENTER 81 // Ext_14
+#define BTN_HOME 80 // Ext_16
+#define BTN_CENTER 81 // Ext_14
#define BTN_ENC BTN_CENTER
-#define BTN_RIGHT 82 // Ext_12
-#define BTN_LEFT 83 // Ext_10
-#define BTN_UP 84 // Ext2_8
-#define BTN_DOWN 85 // Ext2_6
+#define BTN_RIGHT 82 // Ext_12
+#define BTN_LEFT 83 // Ext_10
+#define BTN_UP 84 // Ext2_8
+#define BTN_DOWN 85 // Ext2_6
#define HOME_PIN BTN_HOME
@@ -151,7 +151,7 @@
#define DOGLCD_CS 71
#define LCD_SCREEN_ROT_180
- #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
+ #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
#define STAT_LED_RED_PIN 22
#define STAT_LED_BLUE_PIN 32
diff --git a/Marlin/pins_ULTIMAKER.h b/Marlin/pins_ULTIMAKER.h
index cb117680710a91498f4ed41635f3ae09f8536eb0..d8e7d26bf301263c47b097a9026324b425dcec24 100644
--- a/Marlin/pins_ULTIMAKER.h
+++ b/Marlin/pins_ULTIMAKER.h
@@ -109,7 +109,7 @@
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
-#define SUICIDE_PIN 54 // PIN that has to be turned on right after start, to keep power flowing.
+#define SUICIDE_PIN 54 // PIN that has to be turned on right after start, to keep power flowing.
#define CASE_LIGHT_PIN 8
//
@@ -121,12 +121,12 @@
#if ENABLED(NEWPANEL)
- #define LCD_PINS_RS 20
+ #define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 17
- #define LCD_PINS_D4 16
- #define LCD_PINS_D5 21
- #define LCD_PINS_D6 5
- #define LCD_PINS_D7 6
+ #define LCD_PINS_D4 16
+ #define LCD_PINS_D5 21
+ #define LCD_PINS_D6 5
+ #define LCD_PINS_D7 6
// buttons are directly attached
#define BTN_EN1 40