From 47729918fc7c76cf58013b6b77fb440cf29f719e Mon Sep 17 00:00:00 2001
From: Michael Henke <mhenke@seamgen.com>
Date: Mon, 27 Feb 2017 12:58:18 -0800
Subject: [PATCH] enable ENSURE_SMOOTH_MOVES
---
.../delta/flsun_kossel_mini/Configuration.h | 8 ++++----
.../delta/flsun_kossel_mini/Configuration_adv.h | 5 +++--
2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h
index 6ad573a12c..4b0e327b3e 100644
--- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h
@@ -908,8 +908,8 @@
// Set the number of grid points per dimension.
// Works best with 5 or more points in each dimension.
- #define ABL_GRID_POINTS_X 9
- #define ABL_GRID_POINTS_Y ABL_GRID_POINTS_X
+ #define ABL_GRID_MAX_POINTS_X 9
+ #define ABL_GRID_MAX_POINTS_Y ABL_GRID_MAX_POINTS_X
// Set the boundaries for probing (where the probe can reach).
#define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 15)
@@ -1042,11 +1042,11 @@
// Preheat Constants
#define PREHEAT_1_TEMP_HOTEND 180
#define PREHEAT_1_TEMP_BED 70
-#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
+#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define PREHEAT_2_TEMP_HOTEND 240
#define PREHEAT_2_TEMP_BED 100
-#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
+#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
//
// Nozzle Park -- EXPERIMENTAL
diff --git a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
index 447fe136a2..9251c79671 100644
--- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
@@ -217,12 +217,13 @@
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
+
#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
-#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
+#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
// Define a pin to turn case light on/off
//#define CASE_LIGHT_PIN 4
@@ -529,7 +530,7 @@
// interrupts (without LCD update). By enforcing a minimum time-per-move, the buffer is prevented from
// draining.
//
-//#define ENSURE_SMOOTH_MOVES
+#define ENSURE_SMOOTH_MOVES
#if ENABLED(ENSURE_SMOOTH_MOVES)
//#define ALWAYS_ALLOW_MENU // If enabled, the menu will always be responsive.
// WARNING: Menu navigation during short moves may cause stuttering!
--
GitLab