From 39732838b499d29b4d23aff3c662affa50bc611b Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Mon, 17 Sep 2018 00:57:26 -0500
Subject: [PATCH] Tweak indent of Chinese languages

---
 Marlin/src/lcd/language/language_zh_CN.h | 71 ++++++++++++------------
 Marlin/src/lcd/language/language_zh_TW.h | 71 ++++++++++++------------
 2 files changed, 70 insertions(+), 72 deletions(-)

diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h
index 020073ddd0..3ddd48be6e 100644
--- a/Marlin/src/lcd/language/language_zh_CN.h
+++ b/Marlin/src/lcd/language/language_zh_CN.h
@@ -328,17 +328,17 @@
 #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("灯亮度") // "Light BRIGHTNESS"
 
 #if LCD_WIDTH > 19
-#define MSG_INFO_PRINT_COUNT              _UxGT("打印计数")  //"Print Count"
-#define MSG_INFO_COMPLETED_PRINTS         _UxGT("完成了")  //"Completed"
-#define MSG_INFO_PRINT_TIME               _UxGT("总打印时间")  //"Total print time"
-#define MSG_INFO_PRINT_LONGEST            _UxGT("最长工作时间")  //"Longest job time"
-#define MSG_INFO_PRINT_FILAMENT           _UxGT("总计挤出")  //"Extruded total"
+  #define MSG_INFO_PRINT_COUNT              _UxGT("打印计数")  //"Print Count"
+  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("完成了")  //"Completed"
+  #define MSG_INFO_PRINT_TIME               _UxGT("总打印时间")  //"Total print time"
+  #define MSG_INFO_PRINT_LONGEST            _UxGT("最长工作时间")  //"Longest job time"
+  #define MSG_INFO_PRINT_FILAMENT           _UxGT("总计挤出")  //"Extruded total"
 #else
-#define MSG_INFO_PRINT_COUNT              _UxGT("打印数")  //"Prints"
-#define MSG_INFO_COMPLETED_PRINTS         _UxGT("完成")  //"Completed"
-#define MSG_INFO_PRINT_TIME               _UxGT("总共")  //"Total"
-#define MSG_INFO_PRINT_LONGEST            _UxGT("最长")  //"Longest"
-#define MSG_INFO_PRINT_FILAMENT           _UxGT("已挤出")  //"Extruded"
+  #define MSG_INFO_PRINT_COUNT              _UxGT("打印数")  //"Prints"
+  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("完成")  //"Completed"
+  #define MSG_INFO_PRINT_TIME               _UxGT("总共")  //"Total"
+  #define MSG_INFO_PRINT_LONGEST            _UxGT("最长")  //"Longest"
+  #define MSG_INFO_PRINT_FILAMENT           _UxGT("已挤出")  //"Extruded"
 #endif
 
 #define MSG_INFO_MIN_TEMP                   _UxGT("最低温度")  //"Min Temp"
@@ -359,33 +359,32 @@
 #define MSG_M600_TOO_COLD                   _UxGT("M600: 太凉") // "M600: Too cold"
 
 #if LCD_HEIGHT >= 4
-#define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("等待开始")  //"Wait for start"
-#define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("丝料")  //"of the filament"
-#define MSG_FILAMENT_CHANGE_INIT_3          _UxGT("变更")  //"change"
-#define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("等待")  //"Wait for"
-#define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("卸下丝料")  //"filament unload"
-#define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("插入丝料")  //"Insert filament"
-#define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("并按键")  //"and press button"
-#define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("来继续 ...")  //"to continue..."
-#define MSG_FILAMENT_CHANGE_HEAT_1          _UxGT("按下按钮来") // "Press button to"
-#define MSG_FILAMENT_CHANGE_HEAT_2          _UxGT("加热喷嘴.") // "heat nozzle."
-#define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("加热喷嘴") // "Heating nozzle"
-#define MSG_FILAMENT_CHANGE_HEATING_2       _UxGT("请等待 ...") // "Please wait..."
-#define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("等待")  //"Wait for"
-#define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("进料")  //"filament load"
-#define MSG_FILAMENT_CHANGE_PURGE_1         _UxGT("等待") // "Wait for"
-#define MSG_FILAMENT_CHANGE_PURGE_2         _UxGT("丝料清除") // "filament purge"
-#define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("等待打印")  //"Wait for print"
-#define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("恢复")  //"to resume"
-
+  #define MSG_FILAMENT_CHANGE_INIT_1        _UxGT("等待开始")  //"Wait for start"
+  #define MSG_FILAMENT_CHANGE_INIT_2        _UxGT("丝料")  //"of the filament"
+  #define MSG_FILAMENT_CHANGE_INIT_3        _UxGT("变更")  //"change"
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("等待")  //"Wait for"
+  #define MSG_FILAMENT_CHANGE_UNLOAD_2      _UxGT("卸下丝料")  //"filament unload"
+  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("插入丝料")  //"Insert filament"
+  #define MSG_FILAMENT_CHANGE_INSERT_2      _UxGT("并按键")  //"and press button"
+  #define MSG_FILAMENT_CHANGE_INSERT_3      _UxGT("来继续 ...")  //"to continue..."
+  #define MSG_FILAMENT_CHANGE_HEAT_1        _UxGT("按下按钮来") // "Press button to"
+  #define MSG_FILAMENT_CHANGE_HEAT_2        _UxGT("加热喷嘴.") // "heat nozzle."
+  #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("加热喷嘴") // "Heating nozzle"
+  #define MSG_FILAMENT_CHANGE_HEATING_2     _UxGT("请等待 ...") // "Please wait..."
+  #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("等待")  //"Wait for"
+  #define MSG_FILAMENT_CHANGE_LOAD_2        _UxGT("进料")  //"filament load"
+  #define MSG_FILAMENT_CHANGE_PURGE_1       _UxGT("等待") // "Wait for"
+  #define MSG_FILAMENT_CHANGE_PURGE_2       _UxGT("丝料清除") // "filament purge"
+  #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("等待打印")  //"Wait for print"
+  #define MSG_FILAMENT_CHANGE_RESUME_2      _UxGT("恢复")  //"to resume"
 #else // LCD_HEIGHT < 4
-#define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("请等待 ...")  //"Please wait..."
-#define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("退出中 ...")  //"Ejecting..."
-#define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("插入并单击")  //"Insert and Click"
-#define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("加热中 ...") // "Heating..."
-#define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("装载中 ...")  //"Loading..."
-#define MSG_FILAMENT_CHANGE_PURGE_1         _UxGT("清除中 ...") // "Purging..."
-#define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("恢复中 ...")  //"Resuming..."
+  #define MSG_FILAMENT_CHANGE_INIT_1        _UxGT("请等待 ...")  //"Please wait..."
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("退出中 ...")  //"Ejecting..."
+  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("插入并单击")  //"Insert and Click"
+  #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("加热中 ...") // "Heating..."
+  #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("装载中 ...")  //"Loading..."
+  #define MSG_FILAMENT_CHANGE_PURGE_1       _UxGT("清除中 ...") // "Purging..."
+  #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("恢复中 ...")  //"Resuming..."
 #endif // LCD_HEIGHT < 4
 
 #endif // LANGUAGE_ZH_CN_H
diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h
index 8500a4f9a8..60e1661cf0 100644
--- a/Marlin/src/lcd/language/language_zh_TW.h
+++ b/Marlin/src/lcd/language/language_zh_TW.h
@@ -328,17 +328,17 @@
 #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("燈亮度") // "Light BRIGHTNESS"
 
 #if LCD_WIDTH > 19
-#define MSG_INFO_PRINT_COUNT              _UxGT("列印計數")  //"Print Count"
-#define MSG_INFO_COMPLETED_PRINTS         _UxGT("已完成")  //"Completed"
-#define MSG_INFO_PRINT_TIME               _UxGT("總列印時間")  //"Total print time"
-#define MSG_INFO_PRINT_LONGEST            _UxGT("最長工作時間")  //"Longest job time"
-#define MSG_INFO_PRINT_FILAMENT           _UxGT("總計擠出")  //"Extruded total"
+  #define MSG_INFO_PRINT_COUNT              _UxGT("列印計數")  //"Print Count"
+  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("已完成")  //"Completed"
+  #define MSG_INFO_PRINT_TIME               _UxGT("總列印時間")  //"Total print time"
+  #define MSG_INFO_PRINT_LONGEST            _UxGT("最長工作時間")  //"Longest job time"
+  #define MSG_INFO_PRINT_FILAMENT           _UxGT("總計擠出")  //"Extruded total"
 #else
-#define MSG_INFO_PRINT_COUNT              _UxGT("列印數")  //"Prints"
-#define MSG_INFO_COMPLETED_PRINTS         _UxGT("完成")  //"Completed"
-#define MSG_INFO_PRINT_TIME               _UxGT("總共")  //"Total"
-#define MSG_INFO_PRINT_LONGEST            _UxGT("最長")  //"Longest"
-#define MSG_INFO_PRINT_FILAMENT           _UxGT("已擠出")  //"Extruded"
+  #define MSG_INFO_PRINT_COUNT              _UxGT("列印數")  //"Prints"
+  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("完成")  //"Completed"
+  #define MSG_INFO_PRINT_TIME               _UxGT("總共")  //"Total"
+  #define MSG_INFO_PRINT_LONGEST            _UxGT("最長")  //"Longest"
+  #define MSG_INFO_PRINT_FILAMENT           _UxGT("已擠出")  //"Extruded"
 #endif
 
 #define MSG_INFO_MIN_TEMP                   _UxGT("最低溫度")  //"Min Temp"
@@ -359,33 +359,32 @@
 #define MSG_M600_TOO_COLD                   _UxGT("M600: 太涼") // "M600: Too cold"
 
 #if LCD_HEIGHT >= 4
-#define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("等待開始")  //"Wait for start"
-#define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("絲料")  //"of the filament"
-#define MSG_FILAMENT_CHANGE_INIT_3          _UxGT("變更")  //"change"
-#define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("等待")  //"Wait for"
-#define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("卸下絲料")  //"filament unload"
-#define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("插入絲料")  //"Insert filament"
-#define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("並按鍵")  //"and press button"
-#define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("繼續 ...")  //"to continue..."
-#define MSG_FILAMENT_CHANGE_HEAT_1          _UxGT("按下按鈕來") // "Press button to"
-#define MSG_FILAMENT_CHANGE_HEAT_2          _UxGT("加熱噴嘴.") // "heat nozzle."
-#define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("加熱噴嘴") // "Heating nozzle"
-#define MSG_FILAMENT_CHANGE_HEATING_2       _UxGT("請等待 ...") // "Please wait..."
-#define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("等待")  //"Wait for"
-#define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("進料")  //"filament load"
-#define MSG_FILAMENT_CHANGE_PURGE_1         _UxGT("等待") // "Wait for"
-#define MSG_FILAMENT_CHANGE_PURGE_2         _UxGT("絲料清除") // "filament purge"
-#define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("等待列印")  //"Wait for print"
-#define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("恢復")  //"to resume"
-
+  #define MSG_FILAMENT_CHANGE_INIT_1        _UxGT("等待開始")  //"Wait for start"
+  #define MSG_FILAMENT_CHANGE_INIT_2        _UxGT("絲料")  //"of the filament"
+  #define MSG_FILAMENT_CHANGE_INIT_3        _UxGT("變更")  //"change"
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("等待")  //"Wait for"
+  #define MSG_FILAMENT_CHANGE_UNLOAD_2      _UxGT("卸下絲料")  //"filament unload"
+  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("插入絲料")  //"Insert filament"
+  #define MSG_FILAMENT_CHANGE_INSERT_2      _UxGT("並按鍵")  //"and press button"
+  #define MSG_FILAMENT_CHANGE_INSERT_3      _UxGT("繼續 ...")  //"to continue..."
+  #define MSG_FILAMENT_CHANGE_HEAT_1        _UxGT("按下按鈕來") // "Press button to"
+  #define MSG_FILAMENT_CHANGE_HEAT_2        _UxGT("加熱噴嘴.") // "heat nozzle."
+  #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("加熱噴嘴") // "Heating nozzle"
+  #define MSG_FILAMENT_CHANGE_HEATING_2     _UxGT("請等待 ...") // "Please wait..."
+  #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("等待")  //"Wait for"
+  #define MSG_FILAMENT_CHANGE_LOAD_2        _UxGT("進料")  //"filament load"
+  #define MSG_FILAMENT_CHANGE_PURGE_1       _UxGT("等待") // "Wait for"
+  #define MSG_FILAMENT_CHANGE_PURGE_2       _UxGT("絲料清除") // "filament purge"
+  #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("等待列印")  //"Wait for print"
+  #define MSG_FILAMENT_CHANGE_RESUME_2      _UxGT("恢復")  //"to resume"
 #else // LCD_HEIGHT < 4
-#define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("請等待 ...")  //"Please wait..."
-#define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("退出中 ...")  //"Ejecting..."
-#define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("插入並點擊")  //"Insert and Click"
-#define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("加熱中 ...") // "Heating..."
-#define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("載入中 ...")  //"Loading..."
-#define MSG_FILAMENT_CHANGE_PURGE_1         _UxGT("清除中 ...") // "Purging..."
-#define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("恢復中 ...")  //"Resuming..."
+  #define MSG_FILAMENT_CHANGE_INIT_1        _UxGT("請等待 ...")  //"Please wait..."
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("退出中 ...")  //"Ejecting..."
+  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("插入並點擊")  //"Insert and Click"
+  #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("加熱中 ...") // "Heating..."
+  #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("載入中 ...")  //"Loading..."
+  #define MSG_FILAMENT_CHANGE_PURGE_1       _UxGT("清除中 ...") // "Purging..."
+  #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("恢復中 ...")  //"Resuming..."
 #endif // LCD_HEIGHT < 4
 
 #endif // LANGUAGE_ZH_TW_H
-- 
GitLab