From 37f86d9e08d3ec3f39e6686bc5e5b478c2892931 Mon Sep 17 00:00:00 2001
From: Brais Fortes <brais.fortes@gmail.com>
Date: Sun, 10 May 2020 06:26:06 +0200
Subject: [PATCH] Update Galician language (#17929)
---
Marlin/src/lcd/language/language_gl.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h
index d747b78183..e819d9075f 100644
--- a/Marlin/src/lcd/language/language_gl.h
+++ b/Marlin/src/lcd/language/language_gl.h
@@ -49,6 +49,7 @@ namespace Language_gl {
PROGMEM Language_Str MSG_MEDIA_READ_ERROR = _UxGT("Erro lectura SD/USB");
PROGMEM Language_Str MSG_MEDIA_USB_REMOVED = _UxGT("Disp. USB retirado");
PROGMEM Language_Str MSG_MEDIA_USB_FAILED = _UxGT("Inicio USB fallido");
+ PROGMEM Language_Str MSG_KILL_SUBCALL_OVERFLOW = _UxGT("Desbord. Subch.");
PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("FinCarro");
PROGMEM Language_Str MSG_LCD_SOFT_ENDSTOPS = _UxGT("FinCarro SW");
PROGMEM Language_Str MSG_MAIN = _UxGT("Menú principal");
@@ -263,6 +264,10 @@ namespace Language_gl {
PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Apagar");
PROGMEM Language_Str MSG_PID_AUTOTUNE = _UxGT("Auto-Sint. PID");
PROGMEM Language_Str MSG_PID_AUTOTUNE_E = _UxGT("Auto-Sint. PID *");
+ PROGMEM Language_Str MSG_PID_AUTOTUNE_DONE = _UxGT("Fin Auto-Sint PID");
+ PROGMEM Language_Str MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Auto-Sint. fallida. Extrusor danado.");
+ PROGMEM Language_Str MSG_PID_TEMP_TOO_HIGH = _UxGT("Auto-Sint. fallida. Temperatura moi alta.");
+ PROGMEM Language_Str MSG_PID_TIMEOUT = _UxGT("Auto-Sint. fallida. Tempo excedido.");
PROGMEM Language_Str MSG_PID_P = _UxGT("PID-P");
PROGMEM Language_Str MSG_PID_P_E = _UxGT("PID-P *");
PROGMEM Language_Str MSG_PID_I = _UxGT("PID-I");
@@ -298,6 +303,8 @@ namespace Language_gl {
PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Amax *");
PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-retrac.");
PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-viaxe");
+ PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("Frecuencia max");
+ PROGMEM Language_Str MSG_XY_FREQUENCY_FEEDRATE = _UxGT("Avance min");
PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Pasos/mm");
PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" pasos/mm");
PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" pasos/mm");
@@ -368,11 +375,22 @@ namespace Language_gl {
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V");
PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("Auto-Retracción");
PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH = _UxGT("Lonxitude Retracción");
+ PROGMEM Language_Str MSG_FILAMENT_SWAP_EXTRA = _UxGT("Cambio Extra");
PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH = _UxGT("Lonxitude de Purga");
PROGMEM Language_Str MSG_TOOL_CHANGE = _UxGT("Cambiar Ferramenta");
PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT = _UxGT("Levantar Z");
PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("Velocidade prim.");
PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("Vel. de Retracción");
+ PROGMEM Language_Str MSG_FILAMENT_PARK_ENABLED = _UxGT("Extrusor Est.");
+ PROGMEM Language_Str MSG_SINGLENOZZLE_UNRETRACT_SPEED = _UxGT("Vel. Recuperación");
+ PROGMEM Language_Str MSG_SINGLENOZZLE_FAN_SPEED = _UxGT("Vel. Ventilador");
+ PROGMEM Language_Str MSG_SINGLENOZZLE_FAN_TIME = _UxGT("Tempo Ventilador");
+ PROGMEM Language_Str MSG_TOOL_MIGRATION_ON = _UxGT("Auto ON");
+ PROGMEM Language_Str MSG_TOOL_MIGRATION_OFF = _UxGT("Auto OFF");
+ PROGMEM Language_Str MSG_TOOL_MIGRATION = _UxGT("Cambio Ferramenta");
+ PROGMEM Language_Str MSG_TOOL_MIGRATION_AUTO = _UxGT("Cambio Automático");
+ PROGMEM Language_Str MSG_TOOL_MIGRATION_END = _UxGT("Último Extrusor");
+ PROGMEM Language_Str MSG_TOOL_MIGRATION_SWAP = _UxGT("Cambio a *");
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Cambiar Filamento");
PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("Cambiar Filamento *");
PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("Cargar Filamento");
--
GitLab