From 37cde8a19170921774fd95bc4450263966e6c7bb Mon Sep 17 00:00:00 2001
From: nicolas-rambaud <n.rambaud@moodmedia.com>
Date: Mon, 23 Mar 2015 12:29:12 +0100
Subject: [PATCH] Report changes from previous PR from old code base including
: I've updated the minimum values from the LCD. It has been a while that i
want to at least fix this. I have an inductive probe and often i need to set
my zOffset to something lower than 0.5. With the current implementation, the
default LCD value is set to 0.5 for some reason. On my case i need to be able
to set it down to 0.0 as my inductive probe can be lower than 0.5. Before
with the LCD we couldn't change this value below 0.5. We had to flash the
firmware every time which was painful. Now we are able to change this value
down to 0.0 if needed. I've also changed the minimum value for Z min
acceleration. In the default configuration it's set to 25 but on the LCD the
minimum was 100 which is not coherent. I've changes the minimum to 10. On
this axis, depending on the mechanics/motor drivers we might require very low
acceleration, so i guess 10 is somehow realistic.
---
Marlin/ultralcd.cpp | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 29b3ca118a..19e3d0c504 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -912,9 +912,9 @@ static void lcd_control_motion_menu() {
START_MENU();
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
#ifdef ENABLE_AUTO_BED_LEVELING
- MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, 0.5, 50);
+ MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, 0.0, 50);
#endif
- MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 500, 99000);
+ MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 10, 99000);
MENU_ITEM_EDIT(float3, MSG_VXY_JERK, &max_xy_jerk, 1, 990);
MENU_ITEM_EDIT(float52, MSG_VZ_JERK, &max_z_jerk, 0.1, 990);
MENU_ITEM_EDIT(float3, MSG_VE_JERK, &max_e_jerk, 1, 990);
@@ -926,7 +926,7 @@ static void lcd_control_motion_menu() {
MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &mintravelfeedrate, 0, 999);
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_X, &max_acceleration_units_per_sq_second[X_AXIS], 100, 99000, reset_acceleration_rates);
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Y, &max_acceleration_units_per_sq_second[Y_AXIS], 100, 99000, reset_acceleration_rates);
- MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &max_acceleration_units_per_sq_second[Z_AXIS], 100, 99000, reset_acceleration_rates);
+ MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &max_acceleration_units_per_sq_second[Z_AXIS], 10, 99000, reset_acceleration_rates);
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &max_acceleration_units_per_sq_second[E_AXIS], 100, 99000, reset_acceleration_rates);
MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &retract_acceleration, 100, 99000);
MENU_ITEM_EDIT(float5, MSG_A_TRAVEL, &travel_acceleration, 100, 99000);
--
GitLab