diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 069cf7c2f0ef076b3a1fb9215ffd9ad4e39b759b..d3a8b7e1370b80954aad165de33558eff4af5aef 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -841,7 +841,7 @@
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
- //#define STATUS_ALT_FAN_BITMAP // Use the alternate fan bitmap
+ //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp
index 03bf2650c4a31f4a9e998e7d39a82563673b21d9..29058e32333339adadee1a0b5255a471d683717c 100644
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@@ -488,7 +488,7 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(dummy);
#endif
#else
- const float planner_max_jerk[XYZE] = { float(DEFAULT_EJERK) };
+ const float planner_max_jerk[XYZE] = { float(DEFAULT_EJERK) };
EEPROM_WRITE(planner_max_jerk);
#endif
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index 17ce3e2293d3791f9f9fbc2b3d5070d3a705e8af..fbec75fa4e4197de4a2035240e2f36e1d457e192 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -101,7 +101,7 @@
#elif MB(MKS_BASE)
#include "pins_MKS_BASE.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(MKS_BASE_14)
- #include "pins_MKS_BASE_14.h" // ATmega2560 env:megaatmega2560
+ #include "pins_MKS_BASE_14.h" // ATmega2560 env:megaatmega2560
#elif MB(MKS_BASE_15)
#include "pins_MKS_BASE_15.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(MKS_BASE_HEROIC)
diff --git a/Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h b/Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h
index db2294464689f457512d0f10b58c063cc264bc4b..d66ce05e25af4883597ace08815b35b36a003aa7 100644
--- a/Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h
+++ b/Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h
@@ -141,7 +141,7 @@
* ##################################
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
- *
+ *
* == Y-endstop == == Z-endstop == == Bed temperature ==
*
* 1 2 1 2 1 2
diff --git a/Marlin/src/pins/pins_MKS_BASE_14.h b/Marlin/src/pins/pins_MKS_BASE_14.h
index 60d6ee976112e1e8a32d736d0d1533b5429953a0..75d42a44d4ecd37e71c350be77054d196f5b8e51 100644
--- a/Marlin/src/pins/pins_MKS_BASE_14.h
+++ b/Marlin/src/pins/pins_MKS_BASE_14.h
@@ -1,204 +1,176 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * MKS BASE v1.4
- */
-
-#if HOTENDS > 2 || E_STEPPERS > 2
- #error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
-#endif
-
-#define BOARD_NAME "MKS BASE 1.4"
-
-//
-// Heaters / Fans
-//
-#define MOSFET_D_PIN 7 // PH4 ** Pin16 ** PWM7 //E1
-#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9
-// Other Mods
-#define CASE_LIGHT_PIN 11 // PB5 ** Pin24 ** PWM11
-#define SERVO3_PIN 12 // PB6 ** Pin25 ** D12
-#define PS_ON_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
-#define FILWIDTH_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
-#define FIL_RUNOUT_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
-
-
-//
-// M3/M4/M5 - Spindle/Laser Control
-//
-#define SPINDLE_LASER_PWM_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
-#define SPINDLE_LASER_ENABLE_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
-#define SPINDLE_DIR_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
-
-/**
- * Microstepping pins
- */
-#define X_MS1_PIN 5 // PE3 ** Pin5 ** PWM5
-#define X_MS2_PIN 6 // PH3 ** Pin15 ** PWM6
-#define Y_MS1_PIN 59 // PF5 ** Pin92 ** A5
-#define Y_MS2_PIN 58 // PF4 ** Pin93 ** A4
-#define Z_MS1_PIN 22 // PA0 ** Pin78 ** D22
-#define Z_MS2_PIN 39 // PG2 ** Pin70 ** D39
-#define E0_MS1_PIN 64 // PK2 ** Pin87 ** A10
-#define E0_MS2_PIN 63 // PK1 ** Pin88 ** A9
-#define E1_MS1_PIN 57 // PF3 ** Pin94 ** A3
-#define E1_MS2_PIN 4 // PG5 ** Pin1 ** PWM4
-
-#include "pins_RAMPS.h"
-
- /*****************************************/
- /* Available connectors on MKS BASE v1.4 */
-/*****************************************/
-
-/*
- *******
- * GND *
- ******* E0
- * 10 *
- *******
- * GND *
- ******* E1
- * 7 *
- *******
- * GND *
- ******* FAN
- * 9 *
- *******
-10 // PB4 ** Pin23 ** PWM10
-7 // PH4 ** Pin16 ** PWM7
-9 // PH6 ** Pin18 ** PWM9
- *******
- * GND *
- ******* Heat Bed
- * 8 *
- *******
-8 // PH5 ** Pin17 ** PWM8
- **********
- * 12-24V *
- ********** Power
- * GND *
- **********
-XS3 Connector
- *****************
- * 65 * GND * 5V *
- *****************
- * 66 * GND * 5V *
- *****************
-65 // PK3 ** Pin86 ** A11
-66 // PK4 ** Pin85 ** A12
-Servos Connector
- *****************
- * 11 * GND * 5V *
- *****************
- * 12 * GND * 5V *
- *****************
-11 // PB5 ** Pin24 ** PWM11
-12 // PB6 ** Pin25 ** PWM12
-ICSP
- *****************
- * 5V * 51 * GND *
- *****************
- * 50 * 52 * RST *
- *****************
-50 // PB3 ** Pin22 ** SPI_MISO
-51 // PB2 ** Pin21 ** SPI_MOSI
-52 // PB1 ** Pin20 ** SPI_SCK
-XS6/AUX-1 Connector
- **********************
- * 5V * GND * NC * 20 *
- **********************
- * 50 * 51 * 52 * 21 *
- **********************
-50 // PB3 ** Pin22 ** SPI_MISO
-51 // PB2 ** Pin21 ** SPI_MOSI
-52 // PB1 ** Pin20 ** SPI_SCK
-20 // PD1 ** Pin44 ** I2C_SDA
-21 // PD0 ** Pin43 ** I2C_SCL
-Temperature
- **********************************
- * GND * 69 * GND * 68 * GND * 68 *
- **********************************
-69 // PK7 ** Pin82 ** A15
-68 // PK6 ** Pin83 ** A14
-67 // PK5 ** Pin84 ** A13
-Limit Switches
- ************
- * 2 * GND * X+
- ************
- * 3 * GND * X-
- ************
- * 15 * GND * Y+
- ************
- * 14 * GND * Y-
- ************
- * 19 * GND * Z+
- ************
- * 18 * GND * Z-
- ************
-2 // PE4 ** Pin6 ** PWM2 **X+
-3 // PE5 ** Pin7 ** PWM3 **X-
-15 // PJ0 ** Pin63 ** USART3_RX **Y+
-14 // PJ1 ** Pin64 ** USART3_TX **Y-
-19 // PD2 ** Pin45 ** USART1_RX **Z+
-18 // PD3 ** Pin46 ** USART1_TX **Z-
-EXP1
- ************
- * 37 * 35 *
- ************
- * 17 * 16 *
- ************
- * 23 * 25 *
- ************
- * 27 * 29 *
- ************
- * GND * 5V *
- ************
-37 // PC0 ** Pin53 ** D37
-35 // PC2 ** Pin55 ** D35
-17 // PH0 ** Pin12 ** USART2_RX
-16 // PH1 ** Pin13 ** USART2_TX
-23 // PA1 ** Pin77 ** D23
-25 // PA3 ** Pin75 ** D25
-27 // PA5 ** Pin73 ** D27
-29 // PA7 ** Pin71 ** D29
-EXP2
- ************
- * 50 * 52 *
- ************
- * 31 * 53 *
- ************
- * 33 * 51 *
- ************
- * 49 * 41 *
- ************
- * GND * NC *
- ************
-50 // PB3 ** Pin22 ** SPI_MISO
-52 // PB1 ** Pin20 ** SPI_SCK
-31 // PC6 ** Pin59 ** D31
-53 // PB0 ** Pin19 ** SPI_SS
-33 // PC4 ** Pin57 ** D33
-51 // PB2 ** Pin21 ** SPI_MOSI
-49 // PL0 ** Pin35 ** D49
-41 // PG0 ** Pin51 ** D41
-*/
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * MKS BASE v1.4
+ */
+
+#if HOTENDS > 2 || E_STEPPERS > 2
+ #error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#define BOARD_NAME "MKS BASE 1.4"
+
+//
+// Heaters / Fans
+//
+#define MOSFET_D_PIN 7 // PH4 ** Pin16 ** PWM7 //E1
+#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9
+
+// Other Mods
+#define CASE_LIGHT_PIN 11 // PB5 ** Pin24 ** PWM11
+#define SERVO3_PIN 12 // PB6 ** Pin25 ** D12
+#define PS_ON_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
+#define FILWIDTH_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
+#define FIL_RUNOUT_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#define SPINDLE_LASER_PWM_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
+#define SPINDLE_LASER_ENABLE_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
+#define SPINDLE_DIR_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
+
+//
+// Microstepping pins
+//
+#define X_MS1_PIN 5 // PE3 ** Pin5 ** PWM5
+#define X_MS2_PIN 6 // PH3 ** Pin15 ** PWM6
+#define Y_MS1_PIN 59 // PF5 ** Pin92 ** A5
+#define Y_MS2_PIN 58 // PF4 ** Pin93 ** A4
+#define Z_MS1_PIN 22 // PA0 ** Pin78 ** D22
+#define Z_MS2_PIN 39 // PG2 ** Pin70 ** D39
+#define E0_MS1_PIN 64 // PK2 ** Pin87 ** A10
+#define E0_MS2_PIN 63 // PK1 ** Pin88 ** A9
+#define E1_MS1_PIN 57 // PF3 ** Pin94 ** A3
+#define E1_MS2_PIN 4 // PG5 ** Pin1 ** PWM4
+
+#include "pins_RAMPS.h"
+
+/*
+ Available connectors on MKS BASE v1.4
+
+ =======
+ | GND |
+ |-----| E0
+ | 10 | (10) PB4 ** Pin23 ** PWM10
+ |-----|
+ | GND |
+ |-----| E1
+ | 7 | ( 7) PH4 ** Pin16 ** PWM7
+ |-----|
+ | GND |
+ |-----| FAN
+ | 9 | ( 9) PH6 ** Pin18 ** PWM9
+ =======
+
+ =======
+ | GND |
+ |-----| Heated Bed
+ | 8 | ( 8) PH5 ** Pin17 ** PWM8
+ =======
+
+ ==========
+ | 12-24V |
+ |--------| Power
+ | GND |
+ ==========
+
+ XS3 Connector
+ =================
+ | 65 | GND | 5V | (65) PK3 ** Pin86 ** A11
+ |----|-----|----|
+ | 66 | GND | 5V | (66) PK4 ** Pin85 ** A12
+ =================
+
+ Servos Connector
+ =================
+ | 11 | GND | 5V | (11) PB5 ** Pin24 ** PWM11
+ |----|-----|----|
+ | 12 | GND | 5V | (12) PB6 ** Pin25 ** PWM12
+ =================
+
+ ICSP
+ =================
+ | 5V | 51 | GND | (51) PB2 ** Pin21 ** SPI_MOSI
+ |----|----|-----|
+ | 50 | 52 | RST | (50) PB3 ** Pin22 ** SPI_MISO
+ ================= (52) PB1 ** Pin20 ** SPI_SCK
+
+ XS6/AUX-1 Connector
+ ======================
+ | 5V | GND | NC | 20 | (20) PD1 ** Pin44 ** I2C_SDA
+ |----|-----|----|----|
+ | 50 | 51 | 52 | 21 | (50) PB3 ** Pin22 ** SPI_MISO
+ ====================== (51) PB2 ** Pin21 ** SPI_MOSI
+ (52) PB1 ** Pin20 ** SPI_SCK
+ (21) PD0 ** Pin43 ** I2C_SCL
+
+ Temperature
+ ==================================
+ | GND | 69 | GND | 68 | GND | 67 |
+ ==================================
+ (69) PK7 ** Pin82 ** A15
+ (68) PK6 ** Pin83 ** A14
+ (67) PK5 ** Pin84 ** A13
+
+ Limit Switches
+ ============
+ | 2 | GND | X+ ( 2) PE4 ** Pin6 ** PWM2
+ |----|-----|
+ | 3 | GND | X- ( 3) PE5 ** Pin7 ** PWM3
+ |----|-----|
+ | 15 | GND | Y+ (15) PJ0 ** Pin63 ** USART3_RX
+ |----|-----|
+ | 14 | GND | Y- (14) PJ1 ** Pin64 ** USART3_TX
+ |----|-----|
+ | 19 | GND | Z+ (19) PD2 ** Pin45 ** USART1_RX
+ |----|-----|
+ | 18 | GND | Z- (18) PD3 ** Pin46 ** USART1_TX
+ ============
+
+ EXP1
+ ============
+ | 37 | 35 | (37) PC0 ** Pin53 ** D37
+ |-----|----| (35) PC2 ** Pin55 ** D35
+ | 17 | 16 | (17) PH0 ** Pin12 ** USART2_RX
+ |-----|----| (16) PH1 ** Pin13 ** USART2_TX
+ | 23 | 25 | (23) PA1 ** Pin77 ** D23
+ |-----|----| (25) PA3 ** Pin75 ** D25
+ | 27 | 29 | (27) PA5 ** Pin73 ** D27
+ |-----|----| (29) PA7 ** Pin71 ** D29
+ | GND | 5V |
+ ============
+
+ EXP2
+ ============
+ | 50 | 52 | (50) PB3 ** Pin22 ** SPI_MISO
+ |-----|----| (52) PB1 ** Pin20 ** SPI_SCK
+ | 31 | 53 | (31) PC6 ** Pin59 ** D31
+ |-----|----| (53) PB0 ** Pin19 ** SPI_SS
+ | 33 | 51 | (33) PC4 ** Pin57 ** D33
+ |-----|----| (51) PB2 ** Pin21 ** SPI_MOSI
+ | 49 | 41 | (49) PL0 ** Pin35 ** D49
+ |-----|----| (41) PG0 ** Pin51 ** D41
+ | GND | NC |
+ ============
+*/