diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 6beb94a7ec949ea2ed1fc4b7408e15763c1dc49d..01bd43b9cbc288a6875716647200432840999a08 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
index 6beb94a7ec949ea2ed1fc4b7408e15763c1dc49d..01bd43b9cbc288a6875716647200432840999a08 100644
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index 490927c743ee0eddef8c6fbe6cfef1557797e295..60b4efdf482ae24767c730d33d40ec0b69c3d5ed 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -1550,7 +1550,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
index 9930611a33a682e2173da7d0b74b8946ed8c4a77..cd561145dc4aa2f869d7bc8daeb4312b4dd34e23 100644
--- a/config/examples/ADIMLab/Gantry v1/Configuration.h
+++ b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -1520,7 +1520,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
index 98241600d37a84f3edfa087034bb1fbdb7b2a30a..1b518e6aced5b91c6e4f61d0775d28c93c096cc7 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration.h
+++ b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -1520,7 +1520,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
index 562d696a7f3053a273b9bb491b1d192c45f1f7a4..c72cccf498d8fbe070dcdf0660d13d65f2c3fdbd 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -1539,7 +1539,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
index 5ab3b83b358543305dfe73daaa8096920da0a8ce..c1830874da02d7da993ecef10db7b6e3e65ed915 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -1599,7 +1599,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
index 3f4c20c77bb50ebd5e54874b9944401df1249fe8..69851bfab1aaba6cd6c09ada01abfe28ef23a024 100644
--- a/config/examples/Alfawise/U20/Configuration.h
+++ b/config/examples/Alfawise/U20/Configuration.h
@@ -1598,7 +1598,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index 85a2b3c01f45e8914a6c67724a1135482e62e3a4..f43458c678902ce2b6880467febdebc190bef705 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index cb7a8749930b0c2758bc1ee642c7b59943b81ba8..f7c013690a49ce9fd415b5b1757751bd7aa60c54 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -1530,7 +1530,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index 3c9ccc58460f811ee30f27a24b95690aaaca86a4..5a11bc87f1b2be70cfad2f0dd22b0b9ca0cde916 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index eb7a813a1ed1db6c8f1531fde8ec5798816cc034..b77a6e2a10d9d4861034e7b2a3ee387804b83033 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 2d87983a06391d7531ee8df4973a74a9d6824f65..75188492b9d5482eb4c349fc4f5f70ea9dec84d5 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -1670,7 +1670,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
index 72e0e5097dd160f4f78cd0769705942b7f80fcec..7ce3f9820e3013742c38c5a306c039b9f45a6db3 100644
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@@ -1532,7 +1532,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
index 9837a203f1ed6be64859989b038fd4d2e92c850e..df8fdfea8e83ae2dc8dc7b60244122cc335608fd 100644
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@@ -1530,7 +1530,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h
index 5b06a844cb7be0e1168d85a497c6e4d292c0879c..91bfca0d2bcca71e99e38e5ba8eca209a67dafcd 100644
--- a/config/examples/Anet/E16/Configuration.h
+++ b/config/examples/Anet/E16/Configuration.h
@@ -1531,7 +1531,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index a17c5c3ddcf712062e51d322beea0745be977cbe..6310c92f660c4d209359847a39ed591c2cc523b7 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -1529,7 +1529,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index ada42bcc3cc5095097aedfff62f6e8b4d0e88140..809be590402c578546b414f3e0c1fe58b734a655 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -1520,7 +1520,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index 93bacc47a7420c9851ceed86074e20d6c9a4b702..52a660bfbe8c5a67d54905752485c0fa61789726 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index 5f04382b661194ee88d45b5d6ca1d1ebbcd75500..94eb4d543a9b11265149e61ba7962ea8cdbec6ad 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index dfef4979cb99fdb2237cfeac03e6ef3d1eb7ab27..af5e3df4be5aa289e71a3de1aa5b4e03290c7c98 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index 6b396a4cd936f32cbba072d6ea7c387d51a3a17a..87f7055863f9b988d1e7f0a7aa1b6bd611378884 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -1507,7 +1507,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index 5bffd8b7c9155bf35c018b04c35659c32fc36867..3b702a34113c5e91cc117ca92c1e2a5944902a30 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index f2bed594ac6fbd0019dcd4c73fd8a60ca0b82aa5..7c200db6d72d8ad2b206f6a52afd2717b4265f5e 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -1507,7 +1507,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index 0476552becc82a4ac9109e95e083c35547a339ba..95eef70a68add4bfa5ee3811beaa0be56b7f7f6d 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -1518,7 +1518,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h
index 1c0c42e1d23d08c70faae471550ea2b44ab24a87..5e235d008be0b8166397f4f3910ecc3ae37f6f26 100644
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@@ -1529,7 +1529,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h
index ae54db2104649fe73cd695663cfeae3557c58a48..0ff23f0a8aa357caa9e82040cf53c72cb3036b4c 100644
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@@ -1520,7 +1520,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h
index ee6b92c26bb35494b8d5eb76efa8e0ad043392e6..65bf67a0c05ab5d611f7a0c1870e2e7e9d5a811c 100644
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@@ -1522,7 +1522,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h
index 0bce511e51a2fff0145adfc9c3bd20013a197136..ff4970d85a3fbdc74e5c39a176cf65c30666131b 100644
--- a/config/examples/Creality/CR-10mini/Configuration.h
+++ b/config/examples/Creality/CR-10mini/Configuration.h
@@ -1538,7 +1538,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h
index 9377ec563a615869d9fef6c86b4caa1674f35011..095ff5da19dd776d17b69435d9d2738c7f32eb96 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration.h
+++ b/config/examples/Creality/CR-20 Pro/Configuration.h
@@ -1522,7 +1522,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h
index 34352ec7f6a58f22c7aa9df86ec7a46d28f3d58a..d53cfb05e115486e2e4f87a76ae6d1984d69d8bd 100644
--- a/config/examples/Creality/CR-20/Configuration.h
+++ b/config/examples/Creality/CR-20/Configuration.h
@@ -1522,7 +1522,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index 5423b7ab5a6baebae93e79ec094bb61ba432a39b..205cda5d7e08049d0f753891453e214caa16ba7e 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -1529,7 +1529,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index 5e5fe48cf8f38fca1fb4562667d47ad410157bfa..18b695d6c2b44a120aa73316cd77fa04c29d54f0 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -1523,7 +1523,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h
index d7abbdef49ecbc407df07598979b8d38a1adc575..cfe05583a44b19baed6dbc40c3d4d71a80349c3d 100644
--- a/config/examples/Creality/Ender-3/Configuration.h
+++ b/config/examples/Creality/Ender-3/Configuration.h
@@ -1523,7 +1523,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index f24a5c1dd4ffdd9b2bbcd4b96e8dd2a60a638c6c..937034e27726f33c320f3748bb4dadb0094202e4 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -1529,7 +1529,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h
index c5f79ac3fa3b82b38916956bab4e8ab0ff429b53..cecb5a193b136b468af911694cfa1f036f4b0b16 100644
--- a/config/examples/Creality/Ender-5/Configuration.h
+++ b/config/examples/Creality/Ender-5/Configuration.h
@@ -1522,7 +1522,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h
index cf9be1ed39522b8c595ff7e5db33c45ae369d2d0..b6a6a816dd15eca7826ec190cff9c5044b42a33e 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
index 8e2ef45539d977cc14469178b28e505526ee13a7..79a4affbbfbacbf86e6afca2dafc003399008e29 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
@@ -1524,7 +1524,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h
index fcd446596433bbec4ea757493361714022d7047d..d7544380a8acd3098ea8348530e818e52e37d7e8 100644
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@@ -1529,7 +1529,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h
index a18384cb4d4ef6b3f86be2beefc6af91841e9430..4705794426688cc36664e5aefbfed80e8750c7b5 100644
--- a/config/examples/FYSETC/AIO_II/Configuration.h
+++ b/config/examples/FYSETC/AIO_II/Configuration.h
@@ -1524,7 +1524,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h
index 3162b386b17f5d1dbbb35f5dbef10f66e4840942..bf432c2d8b547aad61b2f8b6817cc7d158b552c3 100644
--- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h
+++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h
@@ -1524,7 +1524,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h
index 6cf8673d98a5ba38ad95493e805d481993e3566e..a4a8010bc1101452e417f17b9d62add9eff702cf 100644
--- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h
+++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h
@@ -1524,7 +1524,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
index 1981803a5878cd59f5bec456c5f52ae4ba599370..e4969280dcb6331d14325636f72219c9be0cfb59 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
@@ -1524,7 +1524,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration.h b/config/examples/FYSETC/Cheetah/base/Configuration.h
index 4fa23146b0bcc112f9a9420bcc8560a02c16719d..397783078dddafb1d5e5687ce1c50cf5a6059640 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration.h
@@ -1524,7 +1524,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h
index fdc805ce8cdbb92e817646c5a0c4937ab512f5c6..4e81b1677207ec7971607c9117e3ec4f57f2acd3 100644
--- a/config/examples/FYSETC/F6_13/Configuration.h
+++ b/config/examples/FYSETC/F6_13/Configuration.h
@@ -1521,7 +1521,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h
index a89073e11c50741f1775a39516f867161f3db7f0..c9e2656a0fd98c1c88c08c8bcd8684825563dc30 100644
--- a/config/examples/Felix/Configuration.h
+++ b/config/examples/Felix/Configuration.h
@@ -1501,7 +1501,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index f4610b5f67db4fd24e039da80a1bea1471aca689..ca206384dc06e4b42610744eca7f9fd159c3f7ac 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -1501,7 +1501,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index 7cdb0c7a18d76c3950cf63c494817c630cc27e2e..90ac1d8f23b15b787fd2db2b78098d4e2a15fd4d 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -1510,7 +1510,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h
index ca7ce0fabb7ad85a8a5aee49150cd746d847e363..2b9da3e4c89412a32fd2aecfdeeac235ce844007 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -1525,7 +1525,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h
index ed469e4bc16d560c74056b1cfa51335d5a5b5744..04cf3d86a6cdb09f459c7975ecbe9b6185b43ba3 100644
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@@ -1624,7 +1624,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index 56ec32b29359f6f7467b31274043115da70e1e86..d0b0e97d00deb974a465fa9953a3848c3fbe6d6c 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -1553,7 +1553,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h
index 62f34348a39ecc32d0dc273e2be5d74b56288a4b..925ee2d090f7cdc7ec3e81ee03174d6799e380e0 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -1544,7 +1544,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h
index 45f260e5e212dfdf776d827c4de4512625cd2e4d..b01cc41eee5af3c08b17ba12f408da7a29817a95 100644
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@@ -1504,7 +1504,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index 4a996da58dab0e1b12211adcfa98c73095ca7d2d..b8074496f1a641e945956137c202a379027a7bac 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -1504,7 +1504,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index ae40466ef0a39d7655a7703819ec24c5d362c666..7e6ec407dab82fa8ac5c1d3349d57ac17cf462af 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -1503,7 +1503,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index 6de7a4b1a3822886c08d02aa2dd27089878dac80..7eb1b85d029294667bc27d3eb4c152bb238a7a22 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -1534,7 +1534,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 71e18ef4731fc8c446267b8855a9a46c395e3085..f0214ee729b06c421898da98466d6e602f912a30 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index c0cb3c439be06962baebbe80c7ffe70a03084746..7fcce2ac16fed898a735994f84ad2944b36375a1 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -1526,7 +1526,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 9cadea0269a5824d41a75baa8d58d7b3e1f31a2b..57fc7a77ff4de7d9895a984ccf66c37f03100d09 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
@@ -1540,7 +1540,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 8ce4d8a7a69db4d53fda3cfce4789cf323af2b58..a6a16ff444f1afcc628c37ad6396995923729bae 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
@@ -1539,7 +1539,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index 054206e607d019442ac47015df70d3ea3b3cc636..806fb97f42b19635b08768688ae3d23d7d6ce7a9 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 592b71a7b8d0f98997466bdf3f0c7a0bed5d6884..bafd7dd081c108482c947e05af747d18366fa7a1 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index a1157ffb16283e3c79730e7ad10b55f949250d5b..e444d93972d5f18ae57e00a6f2104154413e02b0 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -1523,7 +1523,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h
index 944014e75985196a000fcd2429b5a8fd47c6922c..38b8449e9bebbc0b3a7492f5f10abfab1f16c58e 100644
--- a/config/examples/JGAurora/A1/Configuration.h
+++ b/config/examples/JGAurora/A1/Configuration.h
@@ -1526,7 +1526,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index 11b88a4ea07d66eef87627522a5366a0ed8191d4..82a2d9f55afeee9c9024b4bc9ff5285dee275ae3 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -1531,7 +1531,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h
index 087efb1c397c6cfa8f120820355cf602a6bb1dac..bdb34d46758bb921d06b6b60ef0f54235ec13cf4 100644
--- a/config/examples/JGAurora/A5S/Configuration.h
+++ b/config/examples/JGAurora/A5S/Configuration.h
@@ -1526,7 +1526,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index 4b7c5f481b5c44a89d82dc15b393b7ebb5757f49..3867578025ee8f4ab949ed04397d9b3b57c743c7 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -1539,7 +1539,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h
index f9048caad9ebf3decc378fa6363c4f059b9ffbcf..cfe340da3bb84c26c30b819e458b221293bce93a 100644
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@@ -1547,7 +1547,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index 35b42e0ebe94e7c34e2e94719faca4e7b45077a1..e577fb1db359217476f99dffc8a45e83e6beb3f8 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -1518,7 +1518,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index 421e472dbc2af42d1af48577eac96af6676f63bd..002791122cfed407d2ec83b62423575261302455 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -1523,7 +1523,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index c319d0879cf48725d0266df919bbd11d38a3ad5e..5b33605548e461aa98f8133fc88da7af177b4019 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -1523,7 +1523,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h
index 031b771c61886ef39ffff4fd7568d6c6bd2caeeb..b664f5a5b40a0b6dc57b9a28138f9b218e69a6c3 100644
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@@ -1520,7 +1520,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index f8e19582a56d7b1b23814c0a97ba7410416633f0..0198c2c63d24a0b1f4681bf95d47b1a40771d29b 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index 2888450343623daccafea260a78251633e77a7a6..2f07d5563521f8cc96a5cfc7395158bd1c0ba3f0 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -1527,7 +1527,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index e75a18e003af27dbc7e8b67ff7d6efb1ab15f82a..11a2349f1c65042244be240fa167b48bfdf6df75 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index 094b5a949cf7f2a0c602eacaa17919044d8260f2..2e77e07e7c6995ec8e4948e824b0c9c8dcd86739 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -1568,7 +1568,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index 42a055a68c20c43cee078cdfef1e1ded3300a8e9..ac6f9b052109286c873f8d2789891d18dfe8c738 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index 59a936a68ee4910628fad864632bc806fc8eedb8..8967e587b45a6ce77b972f283e9dd021a3587b81 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -1517,7 +1517,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h
index 969beca49d5314cbda80c0be694d63be53983b29..0becdd44d4da8f50c12d2cd7b030da1a131ac441 100644
--- a/config/examples/SCARA/Configuration.h
+++ b/config/examples/SCARA/Configuration.h
@@ -1528,7 +1528,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index 786e95039355fef321ae3192ab388b932b309086..dba1701248a7149be52ac6306dcd253d6ebe9012 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/STM32/STM32F103R/Configuration.h b/config/examples/STM32/STM32F103R/Configuration.h
index 477c7374f947c32863d6b0e81e69f4735267ac35..8a6ae1b1c67282dceebd24cbef34cc06325506ab 100644
--- a/config/examples/STM32/STM32F103R/Configuration.h
+++ b/config/examples/STM32/STM32F103R/Configuration.h
@@ -1521,7 +1521,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h
index 771846927019442ede644742a87d2523d35dd9fb..7783fbca527fa6f96a03110db576e98ba46a8aa8 100644
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h
index 6d7c31e47cffd38e8f1842062d224305f0032f95..6c3881c7d8be177d34c6f02b1e40a1107bdbb6d8 100644
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@@ -1521,7 +1521,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h
index d54e6a05f64489f8c1829a587a928b6acf0c2980..d5d4b9eda1b4d5bfdd35fe61b16d7f91a52a2633 100644
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@@ -1550,7 +1550,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h
index 12d584027208d22207edf9f237063961103700b3..9ff626177d4b27fc35041f3d920f11e20ad68b25 100644
--- a/config/examples/Tevo/Michelangelo/Configuration.h
+++ b/config/examples/Tevo/Michelangelo/Configuration.h
@@ -1524,7 +1524,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h
index d783d1f445f929b496162b835f27b33818457a01..d2f22e443f90bc64f4a3c957405845793ee59ea7 100644
--- a/config/examples/Tevo/Tarantula Pro/Configuration.h
+++ b/config/examples/Tevo/Tarantula Pro/Configuration.h
@@ -1517,7 +1517,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
index 7c61a63385183194aa4be6e41fb8116ec770ce09..72b5341bd918acd75f5bd798a8f46edbc9c97573 100644
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
@@ -1524,7 +1524,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
index 83d54d16f1a93e6daab5fdaa7b100dfd97d64b73..a4228d0cc195e2f7fdc765f26e1cd78a3e17da05 100644
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
@@ -1524,7 +1524,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h
index 67e0cbd216bd5cf330f7f0a6294eea3df8b74544..3fd242576a91e51185beecdcb4413f66a83445dd 100644
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index b972ca95bb7e8920bf7eaf722b86004dedd79e12..fa9c5b53a16dd401854f2243b5978869c77c8276 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -1575,7 +1575,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index b6eb4aa750767c281c14e5f6323e8ff1fac0c5bf..9e50cb9e2f6abea90a40bf3564f74bfd0c5da6cf 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index eeb53dd79bda6d4f6fbc3b10498e3dd1bfabcaff..a5c5163ab96370dff08f727de73d588c0d0d4000 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -1523,7 +1523,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h
index fc26fd5ada843cc92f12d64de30ddb2ff7f964a4..43409e6b08b75dc2217e6b6a32ac73533950b155 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@@ -1540,7 +1540,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index 687fa53c53524a5cc40af514f83687998df26006..7305baa79b6abd5334521609eb806d0f8fb55898 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index fc28bcef74a114f461f59a6d5e1879db83e0d3d9..a26fd4047d0bbba49a7a25361c39d300d6b7ad08 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -1530,7 +1530,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index 69c5817e854ba6755310137602cb1be6b253c135..249574acae6a4027f2222c91c7548807b8890332 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index cb8d71750dee4e5f97d04ced5c1ca18d14967a51..620f5456cf440bc312097fc08aa51550c7c76bbe 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index 907ae7625117fe1f615ccb336e5920d159660ed9..970f990c9be6cff456bdc91882e784e6f89e6acb 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -1528,7 +1528,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index 856d112ade2fc829e19c41895ce0eeef79f40628..5ab1deee05696d6cbeb93b594998f7d01dd8ce56 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -1549,7 +1549,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h
index 70613c58cd6babb5bab7e87bdde3d8fcf7f36a39..4f6eacc27ec46360c488524b0f3c1e23675d0bde 100644
--- a/config/examples/Velleman/K8400/Configuration.h
+++ b/config/examples/Velleman/K8400/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index f1dc53f0f91f7b542196060cf5c7b0a3b99ab000..3d7006f1c9c260aa244492d1383ab6aa8285c18c 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index f4b2130e2a00d3e4464b2ca9e111597b4ecae626..223bba59515a0e5c37d13c9f6490f62f28f860ca 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -1538,7 +1538,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index 7d62346880373064d3fc4c7917d7935d065b2053..99861f8dd6e08c143bd6c163248edd7c57e64f17 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h
@@ -1529,7 +1529,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
index 0d7b265a69ed22c224737fa88e2f6a40e83810c1..07370c873fbced0336de5b83989f0514fcc4d165 100755
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h
index 61312af52c8089bc5d1d1f555c462cf2c28e584f..31f49f3a1bd3def24c78d50700692a40163c25aa 100644
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@@ -1519,7 +1519,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h
index 9dacc6571441c63ea27e52c838dc1f8e3ed1ceb4..e442674b9a0405e323ab10209df0b97483bda858 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -1707,7 +1707,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h
index bc43c8347acbbf0371a0bc5b911a6100c7c54032..dc3c7d03d09902009a415503392aa2369e5a3acd 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h
@@ -1643,7 +1643,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
index 369c823373b0f3d9a824f930292c79820b31a20c..d0b2c6b2d9b32ede908fbc91a7b6804be65a2582 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
@@ -1654,7 +1654,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 5495fda419b8d617a1d15f5f47ce9216d2f67208..0f4efc8d90dc230ecbf25477238a3e5e81d19fa8 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -1647,7 +1647,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index 2a8b067054f414dd599f1432b62976fcab6827b5..924cb8558636bae48d472f67018d8455a4460910 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -1646,7 +1646,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 0e26881c7e14a347c446a9c4c395f800f0e79ff6..fa799262622f1d1567df9869bafa5992218409e0 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -1646,7 +1646,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index 8fdc55eb9dbeb9302dcce8a59e86972eeedee03f..bea55460ec721f93d4a73ea0c334ec535d4885dc 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
@@ -1634,7 +1634,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 2bc25b29e88ce7f23c68f466c36b676b3e984737..151fb8f616f38245dca29b6701444f7805556dc4 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -1649,7 +1649,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index 490aa8de45d95f90b671562d927974946a71b1c7..7b7f8b989262086d21ab0d1ff294c2919011d2b1 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -1634,7 +1634,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index 078da69509358188d2ddb87b35f36b52ab934fb0..f8cafd089ffe2f8d28f521ca93cbccbc48f4c12b 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h
@@ -1638,7 +1638,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index 5c99e65301bb03d728beb8539df309ff2f50324c..f8b6e80163def9de23f13f1b94242f40cdf748eb 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -1634,7 +1634,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index 6bee93d76c1f3af54f7d4fd805ab578bc9493932..2b44bab686f057a51ef3d84b2a6119c63bc93848 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -1636,7 +1636,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index 36804150d86fd5be901207664d0fca3b78c1daf2..223ffa1f163799b563619c7be3d9f06355be1043 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -1637,7 +1637,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index edbd9b0d48e6953ccea9787030e0b61a66878754..15fecea432b681e91c24e556821fb885716e0025 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -1637,7 +1637,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h
index 7ae0618c17e7092a35efb9f48cccbce8d8fb36bb..dae25ca8764ceb813f10f35650e0d5883b3885ac 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -1533,7 +1533,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index cf66da1487036fb812a391c29b5a681d3a6eb7bb..6519db161dc49d71b447c3106a057cf2a69cc83d 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -1522,7 +1522,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index 45233b53913ef5dd27744793b996e4102e720dea..e9f633e9b4bedb2ab2799169ec9733252a55f8d9 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -1514,7 +1514,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius
diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h
index 5c9d5b8cb125c0699b97b8ca68be0b7390bfa49f..465d76f5a7e7193f9deb75fab6ac289919372c98 100644
--- a/config/examples/wt150/Configuration.h
+++ b/config/examples/wt150/Configuration.h
@@ -1524,7 +1524,7 @@
#define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z }
- #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
// Circular pattern radius