diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 50c4581a265c81c65653ec77d813f543a57d69bd..c2dd54bbb64169429a6f88e540a17bbfb8aba6cb 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -297,7 +297,7 @@
// using:
//#define MENU_ADDAUTOSTART
-// Show a progress bar on the LCD when printing from SD?
+// Show a progress bar on HD44780 LCDs for SD printing
//#define LCD_PROGRESS_BAR
#ifdef LCD_PROGRESS_BAR
@@ -309,6 +309,12 @@
#define PROGRESS_MSG_EXPIRE 0
// Enable this to show messages for MSG_TIME then hide them
//#define PROGRESS_MSG_ONCE
+ #ifdef DOGLCD
+ #warning LCD_PROGRESS_BAR does not apply to graphical displays at this time.
+ #endif
+ #ifdef FILAMENT_LCD_DISPLAY
+ #error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both.
+ #endif
#endif
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
diff --git a/Marlin/dogm_lcd_implementation.h b/Marlin/dogm_lcd_implementation.h
index bcbe5f792d49609121220629e78d57cac752d3de..d5a732ba42dd74b9c5d3b93972f8fe0229e72e69 100644
--- a/Marlin/dogm_lcd_implementation.h
+++ b/Marlin/dogm_lcd_implementation.h
@@ -1,19 +1,20 @@
/**
- *dogm_lcd_implementation.h
+ * dogm_lcd_implementation.h
*
- *Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
- *Demonstrator: http://www.reprap.org/wiki/STB_Electronics
- *License: http://opensource.org/licenses/BSD-3-Clause
+ * Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
+ * Demonstrator: http://www.reprap.org/wiki/STB_Electronics
+ * License: http://opensource.org/licenses/BSD-3-Clause
*
- *With the use of:
- *u8glib by Oliver Kraus
- *http://code.google.com/p/u8glib/
- *License: http://opensource.org/licenses/BSD-3-Clause
+ * With the use of:
+ * u8glib by Oliver Kraus
+ * http://code.google.com/p/u8glib/
+ * License: http://opensource.org/licenses/BSD-3-Clause
*/
+#ifndef DOGM_LCD_IMPLEMENTATION_H
+#define DOGM_LCD_IMPLEMENTATION_H
-#ifndef ULTRA_LCD_IMPLEMENTATION_DOGM_H
-#define ULTRA_LCD_IMPLEMENTATION_DOGM_H
+#define MARLIN_VERSION "1.0.2"
/**
* Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays.
@@ -51,12 +52,12 @@
*/
// DOGM parameters (size in pixels)
-#define DOG_CHAR_WIDTH 6
-#define DOG_CHAR_HEIGHT 12
-#define DOG_CHAR_WIDTH_LARGE 9
-#define DOG_CHAR_HEIGHT_LARGE 18
+#define DOG_CHAR_WIDTH 6
+#define DOG_CHAR_HEIGHT 12
+#define DOG_CHAR_WIDTH_LARGE 9
+#define DOG_CHAR_HEIGHT_LARGE 18
-#define START_ROW 0
+#define START_ROW 0
/* Custom characters defined in font font_6x10_marlin.c */
#define LCD_STR_DEGREE "\xB0"
@@ -69,7 +70,7 @@
#define LCD_STR_BEDTEMP "\xFE"
#define LCD_STR_THERMOMETER "\xFF"
-#define FONT_STATUSMENU u8g_font_6x9
+#define FONT_STATUSMENU u8g_font_6x9
int lcd_contrast;
@@ -82,78 +83,57 @@ U8GLIB_ST7920_128X64_RRD u8g(0);
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#else
// for regular DOGM128 display with HW-SPI
-U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
+U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
#endif
-static void lcd_implementation_init()
-{
-#ifdef LCD_PIN_BL
- pinMode(LCD_PIN_BL, OUTPUT); // Enable LCD backlight
- digitalWrite(LCD_PIN_BL, HIGH);
-#endif
+static void lcd_implementation_init() {
+ #ifdef LCD_PIN_BL
+ pinMode(LCD_PIN_BL, OUTPUT); // Enable LCD backlight
+ digitalWrite(LCD_PIN_BL, HIGH);
+ #endif
- u8g.setContrast(lcd_contrast);
- // Uncomment this if you have the first generation (V1.10) of STBs board
- // pinMode(17, OUTPUT); // Enable LCD backlight
- // digitalWrite(17, HIGH);
-
- u8g.firstPage();
- do {
- u8g.setFont(u8g_font_6x10_marlin);
- u8g.setColorIndex(1);
- u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
- u8g.setColorIndex(1);
- } while( u8g.nextPage() );
-
-#ifdef LCD_SCREEN_ROT_90
- u8g.setRot90(); // Rotate screen by 90°
-#endif
+ u8g.setContrast(lcd_contrast);
-#ifdef LCD_SCREEN_ROT_180
- u8g.setRot180(); // Rotate screen by 180°
-#endif
+ /*
+ // Uncomment this if you have the first generation (V1.10) of STBs board
-#ifdef LCD_SCREEN_ROT_270
- u8g.setRot270(); // Rotate screen by 270°
-#endif
+ pinMode(17, OUTPUT); // Enable LCD backlight
+ digitalWrite(17, HIGH);
-
- u8g.firstPage();
- do {
- // RepRap init bmp
- u8g.drawBitmapP(7,7,START_BMPBYTEWIDTH,START_BMPHEIGHT,start_bmp);
- // Welcome message
-
-
-
- u8g.setFont(u8g_font_5x8);
- u8g.drawStr(7,51,"V1.0.2 - marlin.reprap.org");
-
- } while( u8g.nextPage() );
-}
+ //*/
+
+ u8g.firstPage();
+ do {
+ u8g.setFont(u8g_font_6x10_marlin);
+ u8g.setColorIndex(1);
+ u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
+ u8g.setColorIndex(1);
+ } while( u8g.nextPage() );
-static void lcd_implementation_clear()
-{
-// NO NEED TO IMPLEMENT LIKE SO. Picture loop automatically clears the display.
-//
-// Check this article: http://arduino.cc/forum/index.php?topic=91395.25;wap2
-//
-// u8g.firstPage();
-// do {
-// u8g.setColorIndex(0);
-// u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
-// u8g.setColorIndex(1);
-// } while( u8g.nextPage() );
+ #if defined(LCD_SCREEN_ROT_90)
+ u8g.setRot90(); // Rotate screen by 90°
+ #elif defined(LCD_SCREEN_ROT_180)
+ u8g.setRot180(); // Rotate screen by 180°
+ #elif defined(LCD_SCREEN_ROT_270)
+ u8g.setRot270(); // Rotate screen by 270°
+ #endif
+
+ u8g.firstPage();
+ do {
+ // RepRap init bmp
+ u8g.drawBitmapP(7,7,START_BMPBYTEWIDTH,START_BMPHEIGHT,start_bmp);
+ // Welcome message
+ u8g.setFont(u8g_font_5x8);
+ u8g.drawStr(7, 51, "V" MARLIN_VERSION " - marlin.reprap.org");
+ } while( u8g.nextPage() );
}
+static void lcd_implementation_clear() { } // Automatically cleared by Picture Loop
+
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
-static void lcd_printPGM(const char* str)
-{
- char c;
- while((c = pgm_read_byte(str++)) != '\0')
- {
- u8g.print(c);
- }
+static void lcd_printPGM(const char* str) {
+ char c;
+ while ((c = pgm_read_byte(str++))) u8g.print(c);
}
static void _draw_heater_status(int x, int heater) {
@@ -176,49 +156,44 @@ static void _draw_heater_status(int x, int heater) {
}
}
-static void lcd_implementation_status_screen()
-{
+static void lcd_implementation_status_screen() {
- static unsigned char fan_rot = 0;
-
- u8g.setColorIndex(1); // black on white
+ static unsigned char fan_rot = 0;
- // Symbols menu graphics, animated fan
- u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeed ? status_screen0_bmp : status_screen1_bmp);
-
- #ifdef SDSUPPORT
- //SD Card Symbol
- u8g.drawBox(42,42,8,7);
- u8g.drawBox(50,44,2,5);
- u8g.drawFrame(42,49,10,4);
- u8g.drawPixel(50,43);
- // Progress bar
- u8g.drawFrame(54,49,73,4);
+ u8g.setColorIndex(1); // black on white
+
+ // Symbols menu graphics, animated fan
+ u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeed ? status_screen0_bmp : status_screen1_bmp);
- // SD Card Progress bar and clock
- u8g.setFont(FONT_STATUSMENU);
+ #ifdef SDSUPPORT
+ // SD Card Symbol
+ u8g.drawBox(42,42,8,7);
+ u8g.drawBox(50,44,2,5);
+ u8g.drawFrame(42,49,10,4);
+ u8g.drawPixel(50,43);
+
+ // Progress bar frame
+ u8g.drawFrame(54,49,73,4);
+
+ // SD Card Progress bar and clock
+ u8g.setFont(FONT_STATUSMENU);
- if (IS_SD_PRINTING)
- {
- // Progress bar
- u8g.drawBox(55,50, (unsigned int)( (71 * card.percentDone())/100) ,2);
- }
+ if (IS_SD_PRINTING) {
+ // Progress bar solid part
+ u8g.drawBox(55, 50, (unsigned int)(71.f * card.percentDone() / 100.f), 2);
+ }
+
+ u8g.setPrintPos(80,47);
+ if (starttime != 0) {
+ uint16_t time = millis()/60000 - starttime/60000;
+ u8g.print(itostr2(time/60));
+ u8g.print(':');
+ u8g.print(itostr2(time%60));
+ }
else {
- // do nothing
- }
-
- u8g.setPrintPos(80,47);
- if(starttime != 0)
- {
- uint16_t time = millis()/60000 - starttime/60000;
-
- u8g.print(itostr2(time/60));
- u8g.print(':');
- u8g.print(itostr2(time%60));
- }else{
- lcd_printPGM(PSTR("--:--"));
- }
- #endif
+ lcd_printPGM(PSTR("--:--"));
+ }
+ #endif
// Extruders
_draw_heater_status(6, 0);
@@ -232,107 +207,101 @@ static void lcd_implementation_status_screen()
// Heatbed
_draw_heater_status(81, -1);
- // Fan
- u8g.setFont(FONT_STATUSMENU);
- u8g.setPrintPos(104,27);
- #if defined(FAN_PIN) && FAN_PIN > -1
- u8g.print(itostr3(int((fanSpeed*100)/256 + 1)));
- u8g.print("%");
- #else
- u8g.print("---");
- #endif
-
-
- // X, Y, Z-Coordinates
- u8g.setFont(FONT_STATUSMENU);
- u8g.drawBox(0,29,128,10);
- u8g.setColorIndex(0); // white on black
- u8g.setPrintPos(2,37);
- u8g.print("X");
- u8g.drawPixel(8,33);
- u8g.drawPixel(8,35);
- u8g.setPrintPos(10,37);
- u8g.print(ftostr31ns(current_position[X_AXIS]));
- u8g.setPrintPos(43,37);
- lcd_printPGM(PSTR("Y"));
- u8g.drawPixel(49,33);
- u8g.drawPixel(49,35);
- u8g.setPrintPos(51,37);
- u8g.print(ftostr31ns(current_position[Y_AXIS]));
- u8g.setPrintPos(83,37);
- u8g.print("Z");
- u8g.drawPixel(89,33);
- u8g.drawPixel(89,35);
- u8g.setPrintPos(91,37);
- u8g.print(ftostr31(current_position[Z_AXIS]));
- u8g.setColorIndex(1); // black on white
+ // Fan
+ u8g.setFont(FONT_STATUSMENU);
+ u8g.setPrintPos(104,27);
+ #if defined(FAN_PIN) && FAN_PIN > -1
+ u8g.print(itostr3(int((fanSpeed*100)/256 + 1)));
+ u8g.print("%");
+ #else
+ u8g.print("---");
+ #endif
+
+ // X, Y, Z-Coordinates
+ u8g.setFont(FONT_STATUSMENU);
+ u8g.drawBox(0,29,128,10);
+ u8g.setColorIndex(0); // white on black
+ u8g.setPrintPos(2,37);
+ u8g.print("X");
+ u8g.drawPixel(8,33);
+ u8g.drawPixel(8,35);
+ u8g.setPrintPos(10,37);
+ u8g.print(ftostr31ns(current_position[X_AXIS]));
+ u8g.setPrintPos(43,37);
+ lcd_printPGM(PSTR("Y"));
+ u8g.drawPixel(49,33);
+ u8g.drawPixel(49,35);
+ u8g.setPrintPos(51,37);
+ u8g.print(ftostr31ns(current_position[Y_AXIS]));
+ u8g.setPrintPos(83,37);
+ u8g.print("Z");
+ u8g.drawPixel(89,33);
+ u8g.drawPixel(89,35);
+ u8g.setPrintPos(91,37);
+ u8g.print(ftostr31(current_position[Z_AXIS]));
+ u8g.setColorIndex(1); // black on white
- // Feedrate
- u8g.setFont(u8g_font_6x10_marlin);
- u8g.setPrintPos(3,49);
- u8g.print(LCD_STR_FEEDRATE[0]);
- u8g.setFont(FONT_STATUSMENU);
- u8g.setPrintPos(12,48);
- u8g.print(itostr3(feedmultiply));
- u8g.print('%');
-
- // Status line
- u8g.setFont(FONT_STATUSMENU);
- u8g.setPrintPos(0,61);
- #ifndef FILAMENT_LCD_DISPLAY
- u8g.print(lcd_status_message);
- #else
- if(message_millis+5000>millis()){ //Display both Status message line and Filament display on the last line
- u8g.print(lcd_status_message);
- }
- else
- {
- lcd_printPGM(PSTR("dia:"));
- u8g.print(ftostr12ns(filament_width_meas));
- lcd_printPGM(PSTR(" factor:"));
- u8g.print(itostr3(extrudemultiply));
- u8g.print('%');
- }
- #endif
+ // Feedrate
+ u8g.setFont(u8g_font_6x10_marlin);
+ u8g.setPrintPos(3,49);
+ u8g.print(LCD_STR_FEEDRATE[0]);
+ u8g.setFont(FONT_STATUSMENU);
+ u8g.setPrintPos(12,48);
+ u8g.print(itostr3(feedmultiply));
+ u8g.print('%');
+ // Status line
+ u8g.setFont(FONT_STATUSMENU);
+ u8g.setPrintPos(0,61);
+ #ifndef FILAMENT_LCD_DISPLAY
+ u8g.print(lcd_status_message);
+ #else
+ if (millis() < message_millis + 5000) { //Display both Status message line and Filament display on the last line
+ u8g.print(lcd_status_message);
+ }
+ else {
+ lcd_printPGM(PSTR("dia:"));
+ u8g.print(ftostr12ns(filament_width_meas));
+ lcd_printPGM(PSTR(" factor:"));
+ u8g.print(itostr3(extrudemultiply));
+ u8g.print('%');
+ }
+ #endif
}
-static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
-{
- char c;
-
- uint8_t n = LCD_WIDTH - 1 - 2;
-
- if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] ))
- {
- u8g.setColorIndex(1); // black on white
- u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
- u8g.setColorIndex(0); // following text must be white on black
- } else u8g.setColorIndex(1); // unmarked text is black on white
-
- u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
- u8g.print(pre_char == '>' ? ' ' : pre_char); // Row selector is obsolete
-
-
- while( (c = pgm_read_byte(pstr)) != '\0' )
- {
- u8g.print(c);
- pstr++;
- n--;
- }
- while(n--){
- u8g.print(' ');
- }
-
- u8g.print(post_char);
- u8g.print(' ');
- u8g.setColorIndex(1); // restore settings to black on white
+static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) {
+ char c;
+
+ uint8_t n = LCD_WIDTH - 1 - 2;
+
+ if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] )) {
+ u8g.setColorIndex(1); // black on white
+ u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
+ u8g.setColorIndex(0); // following text must be white on black
+ }
+ else {
+ u8g.setColorIndex(1); // unmarked text is black on white
+ }
+
+ u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
+ u8g.print(pre_char == '>' ? ' ' : pre_char); // Row selector is obsolete
+
+ while((c = pgm_read_byte(pstr))) {
+ u8g.print(c);
+ pstr++;
+ n--;
+ }
+ while(n--) u8g.print(' ');
+
+ u8g.print(post_char);
+ u8g.print(' ');
+ u8g.setColorIndex(1); // restore settings to black on white
}
static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, const char* data, bool pgm) {
char c;
uint8_t n = LCD_WIDTH - 1 - 2 - (pgm ? strlen_P(data) : strlen(data));
-
+
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
u8g.print(pre_char);
@@ -391,14 +360,13 @@ static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char p
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
-void lcd_implementation_drawedit(const char* pstr, char* value)
-{
- u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
- u8g.setFont(u8g_font_9x18);
- lcd_printPGM(pstr);
- u8g.print(':');
- u8g.setPrintPos((14 - strlen(value)) * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
- u8g.print(value);
+void lcd_implementation_drawedit(const char* pstr, char* value) {
+ u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
+ u8g.setFont(u8g_font_9x18);
+ lcd_printPGM(pstr);
+ u8g.print(':');
+ u8g.setPrintPos((14 - strlen(value)) * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
+ u8g.print(value);
}
static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, char * const longFilename, bool isDir, bool isSelected) {
@@ -417,7 +385,7 @@ static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, ch
}
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
- u8g.print(' '); // Indent by 1 char
+ u8g.print(' '); // Indent by 1 char
if (isDir) u8g.print(LCD_STR_FOLDER[0]);
@@ -445,20 +413,16 @@ static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, ch
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
-static void lcd_implementation_quick_feedback()
-{
-
-#if BEEPER > -1
+static void lcd_implementation_quick_feedback() {
+ #if BEEPER > -1
SET_OUTPUT(BEEPER);
- for(int8_t i=0;i<10;i++)
- {
- WRITE(BEEPER,HIGH);
- delay(3);
- WRITE(BEEPER,LOW);
- delay(3);
+ for(int8_t i=0; i<10; i++) {
+ WRITE(BEEPER,HIGH);
+ delay(3);
+ WRITE(BEEPER,LOW);
+ delay(3);
}
-#endif
+ #endif
}
-#endif//ULTRA_LCD_IMPLEMENTATION_DOGM_H
-
+#endif //__DOGM_LCD_IMPLEMENTATION_H
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index d790266d92f99ee785f140702a0b2084f9d6c274..13d4f3ff671f2d78c27b6fa6f31e9d463207477a 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -195,7 +195,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
if (feedback) lcd_quick_feedback();
// For LCD_PROGRESS_BAR re-initialize the custom characters
- #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
+ #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
lcd_set_custom_characters(menu == lcd_status_screen);
#endif
}
@@ -204,7 +204,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
/* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */
static void lcd_status_screen()
{
- #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
+ #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
uint16_t mil = millis();
#ifndef PROGRESS_MSG_ONCE
if (mil > progressBarTick + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME) {
@@ -236,11 +236,12 @@ static void lcd_status_screen()
lcd_status_update_delay--;
else
lcdDrawUpdate = 1;
- if (lcdDrawUpdate)
- {
+
+ if (lcdDrawUpdate) {
lcd_implementation_status_screen();
lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
}
+
#ifdef ULTIPANEL
bool current_click = LCD_CLICKED;
@@ -265,7 +266,7 @@ static void lcd_status_screen()
{
lcd_goto_menu(lcd_main_menu);
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
- #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
+ #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
currentMenu == lcd_status_screen
#endif
);
@@ -1191,7 +1192,7 @@ void lcd_update()
lcdDrawUpdate = 2;
lcd_oldcardstatus = IS_SD_INSERTED;
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
- #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
+ #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
currentMenu == lcd_status_screen
#endif
);
@@ -1294,7 +1295,7 @@ void lcd_finishstatus() {
}
}
lcd_status_message[LCD_WIDTH] = '\0';
- #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
+ #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
#if PROGRESS_MSG_EXPIRE > 0
messageTick =
#endif
diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h
index a175f4a7571753ac7ed0b48c36826e272182aeb0..30175be39d7cb041eacdeb779854c93b20c3073b 100644
--- a/Marlin/ultralcd.h
+++ b/Marlin/ultralcd.h
@@ -49,7 +49,7 @@
#ifdef FILAMENT_LCD_DISPLAY
extern unsigned long message_millis;
#endif
-
+
void lcd_buzz(long duration,uint16_t freq);
bool lcd_clicked();