From 300435919108c2faa95dd688bb41589a7de967d0 Mon Sep 17 00:00:00 2001
From: Richard Wackerbarth <rkw@dataplex.net>
Date: Wed, 11 Feb 2015 09:58:14 -0600
Subject: [PATCH] Libraries supporting Marlin platform
---
.../marlin/avr/firmwares/Brainwave.inf | 106 ++++
.../libraries/LiquidCrystal/LiquidCrystal.cpp | 310 +++++++++++
.../libraries/LiquidCrystal/LiquidCrystal.h | 106 ++++
.../avr/libraries/LiquidCrystal/keywords.txt | 37 ++
.../hardware/marlin/avr/libraries/SPI/SPI.cpp | 66 +++
.../hardware/marlin/avr/libraries/SPI/SPI.h | 70 +++
.../marlin/avr/libraries/SPI/keywords.txt | 36 ++
.../marlin/avr/libraries/Wire/Wire.cpp | 303 ++++++++++
.../hardware/marlin/avr/libraries/Wire/Wire.h | 80 +++
.../SFRRanger_reader/SFRRanger_reader.ino | 87 +++
.../digital_potentiometer.ino | 39 ++
.../examples/master_reader/master_reader.ino | 32 ++
.../examples/master_writer/master_writer.ino | 31 ++
.../slave_receiver/slave_receiver.ino | 38 ++
.../examples/slave_sender/slave_sender.ino | 32 ++
.../marlin/avr/libraries/Wire/keywords.txt | 32 ++
.../avr/libraries/Wire/library.properties | 8 +
.../marlin/avr/libraries/Wire/utility/twi.c | 527 ++++++++++++++++++
.../marlin/avr/libraries/Wire/utility/twi.h | 53 ++
19 files changed, 1993 insertions(+)
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/firmwares/Brainwave.inf
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/LiquidCrystal/LiquidCrystal.cpp
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/LiquidCrystal/LiquidCrystal.h
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/LiquidCrystal/keywords.txt
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/SPI/SPI.cpp
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/SPI/SPI.h
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/SPI/keywords.txt
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/Wire.cpp
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/Wire.h
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/master_reader/master_reader.ino
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/master_writer/master_writer.ino
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/slave_receiver/slave_receiver.ino
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/slave_sender/slave_sender.ino
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/keywords.txt
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/library.properties
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/utility/twi.c
create mode 100644 ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/utility/twi.h
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/firmwares/Brainwave.inf b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/firmwares/Brainwave.inf
new file mode 100644
index 0000000000..e48829420b
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/firmwares/Brainwave.inf
@@ -0,0 +1,106 @@
+;************************************************************
+; Windows USB CDC ACM Setup File
+; Copyright (c) 2000 Microsoft Corporation
+
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%MFGNAME%
+LayoutFile=layout.inf
+CatalogFile=%MFGFILENAME%.cat
+DriverVer=11/15/2007,5.1.2600.0
+
+[Manufacturer]
+%MFGNAME%=DeviceList, NTamd64
+
+[DestinationDirs]
+DefaultDestDir=12
+
+
+;------------------------------------------------------------------------------
+; Windows 2000/XP/Vista-32bit Sections
+;------------------------------------------------------------------------------
+
+[DriverInstall.nt]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles.nt
+AddReg=DriverInstall.nt.AddReg
+
+[DriverCopyFiles.nt]
+usbser.sys,,,0x20
+
+[DriverInstall.nt.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.nt.Services]
+AddService=usbser, 0x00000002, DriverService.nt
+
+[DriverService.nt]
+DisplayName=%SERVICE%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\%DRIVERFILENAME%.sys
+
+;------------------------------------------------------------------------------
+; Vista-64bit Sections
+;------------------------------------------------------------------------------
+
+[DriverInstall.NTamd64]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles.NTamd64
+AddReg=DriverInstall.NTamd64.AddReg
+
+[DriverCopyFiles.NTamd64]
+%DRIVERFILENAME%.sys,,,0x20
+
+[DriverInstall.NTamd64.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.NTamd64.Services]
+AddService=usbser, 0x00000002, DriverService.NTamd64
+
+[DriverService.NTamd64]
+DisplayName=%SERVICE%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\%DRIVERFILENAME%.sys
+
+
+;------------------------------------------------------------------------------
+; Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID. Use the format as shown below.
+; Note: One INF file can be used for multiple devices with different VID and PIDs.
+; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[SourceDisksFiles]
+[SourceDisksNames]
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_16D0&PID_076B
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_16D0&PID_204A
+
+
+;------------------------------------------------------------------------------
+; String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+MFGFILENAME="CDC_vista"
+DRIVERFILENAME ="usbser"
+MFGNAME="Metrix Create Space"
+INSTDISK="Brainwave Driver Installer"
+DESCRIPTION="Communications Port"
+SERVICE="USB RS-232 Emulation Driver"
\ No newline at end of file
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/LiquidCrystal/LiquidCrystal.cpp b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/LiquidCrystal/LiquidCrystal.cpp
new file mode 100644
index 0000000000..61efca46e0
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/LiquidCrystal/LiquidCrystal.cpp
@@ -0,0 +1,310 @@
+#include "LiquidCrystal.h"
+
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include "Arduino.h"
+
+// When the display powers up, it is configured as follows:
+//
+// 1. Display clear
+// 2. Function set:
+// DL = 1; 8-bit interface data
+// N = 0; 1-line display
+// F = 0; 5x8 dot character font
+// 3. Display on/off control:
+// D = 0; Display off
+// C = 0; Cursor off
+// B = 0; Blinking off
+// 4. Entry mode set:
+// I/D = 1; Increment by 1
+// S = 0; No shift
+//
+// Note, however, that resetting the Arduino doesn't reset the LCD, so we
+// can't assume that it's in that state when a sketch starts (and the
+// LiquidCrystal constructor is called).
+
+LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
+ uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
+ uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
+{
+ init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7);
+}
+
+LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
+ uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
+ uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
+{
+ init(0, rs, 255, enable, d0, d1, d2, d3, d4, d5, d6, d7);
+}
+
+LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
+ uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
+{
+ init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0);
+}
+
+LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
+ uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
+{
+ init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);
+}
+
+void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
+ uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
+ uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
+{
+ _rs_pin = rs;
+ _rw_pin = rw;
+ _enable_pin = enable;
+
+ _data_pins[0] = d0;
+ _data_pins[1] = d1;
+ _data_pins[2] = d2;
+ _data_pins[3] = d3;
+ _data_pins[4] = d4;
+ _data_pins[5] = d5;
+ _data_pins[6] = d6;
+ _data_pins[7] = d7;
+
+ pinMode(_rs_pin, OUTPUT);
+ // we can save 1 pin by not using RW. Indicate by passing 255 instead of pin#
+ if (_rw_pin != 255) {
+ pinMode(_rw_pin, OUTPUT);
+ }
+ pinMode(_enable_pin, OUTPUT);
+
+ if (fourbitmode)
+ _displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS;
+ else
+ _displayfunction = LCD_8BITMODE | LCD_1LINE | LCD_5x8DOTS;
+
+ begin(16, 1);
+}
+
+void LiquidCrystal::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) {
+ if (lines > 1) {
+ _displayfunction |= LCD_2LINE;
+ }
+ _numlines = lines;
+ _currline = 0;
+
+ // for some 1 line displays you can select a 10 pixel high font
+ if ((dotsize != 0) && (lines == 1)) {
+ _displayfunction |= LCD_5x10DOTS;
+ }
+
+ // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION!
+ // according to datasheet, we need at least 40ms after power rises above 2.7V
+ // before sending commands. Arduino can turn on way befer 4.5V so we'll wait 50
+ delayMicroseconds(50000);
+ // Now we pull both RS and R/W low to begin commands
+ digitalWrite(_rs_pin, LOW);
+ digitalWrite(_enable_pin, LOW);
+ if (_rw_pin != 255) {
+ digitalWrite(_rw_pin, LOW);
+ }
+
+ //put the LCD into 4 bit or 8 bit mode
+ if (! (_displayfunction & LCD_8BITMODE)) {
+ // this is according to the hitachi HD44780 datasheet
+ // figure 24, pg 46
+
+ // we start in 8bit mode, try to set 4 bit mode
+ write4bits(0x03);
+ delayMicroseconds(4500); // wait min 4.1ms
+
+ // second try
+ write4bits(0x03);
+ delayMicroseconds(4500); // wait min 4.1ms
+
+ // third go!
+ write4bits(0x03);
+ delayMicroseconds(150);
+
+ // finally, set to 4-bit interface
+ write4bits(0x02);
+ } else {
+ // this is according to the hitachi HD44780 datasheet
+ // page 45 figure 23
+
+ // Send function set command sequence
+ command(LCD_FUNCTIONSET | _displayfunction);
+ delayMicroseconds(4500); // wait more than 4.1ms
+
+ // second try
+ command(LCD_FUNCTIONSET | _displayfunction);
+ delayMicroseconds(150);
+
+ // third go
+ command(LCD_FUNCTIONSET | _displayfunction);
+ }
+
+ // finally, set # lines, font size, etc.
+ command(LCD_FUNCTIONSET | _displayfunction);
+
+ // turn the display on with no cursor or blinking default
+ _displaycontrol = LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF;
+ display();
+
+ // clear it off
+ clear();
+
+ // Initialize to default text direction (for romance languages)
+ _displaymode = LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT;
+ // set the entry mode
+ command(LCD_ENTRYMODESET | _displaymode);
+
+}
+
+/********** high level commands, for the user! */
+void LiquidCrystal::clear()
+{
+ command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero
+ delayMicroseconds(2000); // this command takes a long time!
+}
+
+void LiquidCrystal::home()
+{
+ command(LCD_RETURNHOME); // set cursor position to zero
+ delayMicroseconds(2000); // this command takes a long time!
+}
+
+void LiquidCrystal::setCursor(uint8_t col, uint8_t row)
+{
+ int row_offsets[] = { 0x00, 0x40, 0x14, 0x54 };
+ if ( row >= _numlines ) {
+ row = _numlines-1; // we count rows starting w/0
+ }
+
+ command(LCD_SETDDRAMADDR | (col + row_offsets[row]));
+}
+
+// Turn the display on/off (quickly)
+void LiquidCrystal::noDisplay() {
+ _displaycontrol &= ~LCD_DISPLAYON;
+ command(LCD_DISPLAYCONTROL | _displaycontrol);
+}
+void LiquidCrystal::display() {
+ _displaycontrol |= LCD_DISPLAYON;
+ command(LCD_DISPLAYCONTROL | _displaycontrol);
+}
+
+// Turns the underline cursor on/off
+void LiquidCrystal::noCursor() {
+ _displaycontrol &= ~LCD_CURSORON;
+ command(LCD_DISPLAYCONTROL | _displaycontrol);
+}
+void LiquidCrystal::cursor() {
+ _displaycontrol |= LCD_CURSORON;
+ command(LCD_DISPLAYCONTROL | _displaycontrol);
+}
+
+// Turn on and off the blinking cursor
+void LiquidCrystal::noBlink() {
+ _displaycontrol &= ~LCD_BLINKON;
+ command(LCD_DISPLAYCONTROL | _displaycontrol);
+}
+void LiquidCrystal::blink() {
+ _displaycontrol |= LCD_BLINKON;
+ command(LCD_DISPLAYCONTROL | _displaycontrol);
+}
+
+// These commands scroll the display without changing the RAM
+void LiquidCrystal::scrollDisplayLeft(void) {
+ command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVELEFT);
+}
+void LiquidCrystal::scrollDisplayRight(void) {
+ command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVERIGHT);
+}
+
+// This is for text that flows Left to Right
+void LiquidCrystal::leftToRight(void) {
+ _displaymode |= LCD_ENTRYLEFT;
+ command(LCD_ENTRYMODESET | _displaymode);
+}
+
+// This is for text that flows Right to Left
+void LiquidCrystal::rightToLeft(void) {
+ _displaymode &= ~LCD_ENTRYLEFT;
+ command(LCD_ENTRYMODESET | _displaymode);
+}
+
+// This will 'right justify' text from the cursor
+void LiquidCrystal::autoscroll(void) {
+ _displaymode |= LCD_ENTRYSHIFTINCREMENT;
+ command(LCD_ENTRYMODESET | _displaymode);
+}
+
+// This will 'left justify' text from the cursor
+void LiquidCrystal::noAutoscroll(void) {
+ _displaymode &= ~LCD_ENTRYSHIFTINCREMENT;
+ command(LCD_ENTRYMODESET | _displaymode);
+}
+
+// Allows us to fill the first 8 CGRAM locations
+// with custom characters
+void LiquidCrystal::createChar(uint8_t location, uint8_t charmap[]) {
+ location &= 0x7; // we only have 8 locations 0-7
+ command(LCD_SETCGRAMADDR | (location << 3));
+ for (int i=0; i<8; i++) {
+ write(charmap[i]);
+ }
+}
+
+/*********** mid level commands, for sending data/cmds */
+
+inline void LiquidCrystal::command(uint8_t value) {
+ send(value, LOW);
+}
+
+inline size_t LiquidCrystal::write(uint8_t value) {
+ send(value, HIGH);
+ return 1; // assume sucess
+}
+
+/************ low level data pushing commands **********/
+
+// write either command or data, with automatic 4/8-bit selection
+void LiquidCrystal::send(uint8_t value, uint8_t mode) {
+ digitalWrite(_rs_pin, mode);
+
+ // if there is a RW pin indicated, set it low to Write
+ if (_rw_pin != 255) {
+ digitalWrite(_rw_pin, LOW);
+ }
+
+ if (_displayfunction & LCD_8BITMODE) {
+ write8bits(value);
+ } else {
+ write4bits(value>>4);
+ write4bits(value);
+ }
+}
+
+void LiquidCrystal::pulseEnable(void) {
+ digitalWrite(_enable_pin, LOW);
+ delayMicroseconds(1);
+ digitalWrite(_enable_pin, HIGH);
+ delayMicroseconds(1); // enable pulse must be >450ns
+ digitalWrite(_enable_pin, LOW);
+ delayMicroseconds(100); // commands need > 37us to settle
+}
+
+void LiquidCrystal::write4bits(uint8_t value) {
+ for (int i = 0; i < 4; i++) {
+ pinMode(_data_pins[i], OUTPUT);
+ digitalWrite(_data_pins[i], (value >> i) & 0x01);
+ }
+
+ pulseEnable();
+}
+
+void LiquidCrystal::write8bits(uint8_t value) {
+ for (int i = 0; i < 8; i++) {
+ pinMode(_data_pins[i], OUTPUT);
+ digitalWrite(_data_pins[i], (value >> i) & 0x01);
+ }
+
+ pulseEnable();
+}
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/LiquidCrystal/LiquidCrystal.h b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/LiquidCrystal/LiquidCrystal.h
new file mode 100644
index 0000000000..24ec5afdf5
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/LiquidCrystal/LiquidCrystal.h
@@ -0,0 +1,106 @@
+#ifndef LiquidCrystal_h
+#define LiquidCrystal_h
+
+#include <inttypes.h>
+#include "Print.h"
+
+// commands
+#define LCD_CLEARDISPLAY 0x01
+#define LCD_RETURNHOME 0x02
+#define LCD_ENTRYMODESET 0x04
+#define LCD_DISPLAYCONTROL 0x08
+#define LCD_CURSORSHIFT 0x10
+#define LCD_FUNCTIONSET 0x20
+#define LCD_SETCGRAMADDR 0x40
+#define LCD_SETDDRAMADDR 0x80
+
+// flags for display entry mode
+#define LCD_ENTRYRIGHT 0x00
+#define LCD_ENTRYLEFT 0x02
+#define LCD_ENTRYSHIFTINCREMENT 0x01
+#define LCD_ENTRYSHIFTDECREMENT 0x00
+
+// flags for display on/off control
+#define LCD_DISPLAYON 0x04
+#define LCD_DISPLAYOFF 0x00
+#define LCD_CURSORON 0x02
+#define LCD_CURSOROFF 0x00
+#define LCD_BLINKON 0x01
+#define LCD_BLINKOFF 0x00
+
+// flags for display/cursor shift
+#define LCD_DISPLAYMOVE 0x08
+#define LCD_CURSORMOVE 0x00
+#define LCD_MOVERIGHT 0x04
+#define LCD_MOVELEFT 0x00
+
+// flags for function set
+#define LCD_8BITMODE 0x10
+#define LCD_4BITMODE 0x00
+#define LCD_2LINE 0x08
+#define LCD_1LINE 0x00
+#define LCD_5x10DOTS 0x04
+#define LCD_5x8DOTS 0x00
+
+class LiquidCrystal : public Print {
+public:
+ LiquidCrystal(uint8_t rs, uint8_t enable,
+ uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
+ uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7);
+ LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
+ uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
+ uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7);
+ LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
+ uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3);
+ LiquidCrystal(uint8_t rs, uint8_t enable,
+ uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3);
+
+ void init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
+ uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
+ uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7);
+
+ void begin(uint8_t cols, uint8_t rows, uint8_t charsize = LCD_5x8DOTS);
+
+ void clear();
+ void home();
+
+ void noDisplay();
+ void display();
+ void noBlink();
+ void blink();
+ void noCursor();
+ void cursor();
+ void scrollDisplayLeft();
+ void scrollDisplayRight();
+ void leftToRight();
+ void rightToLeft();
+ void autoscroll();
+ void noAutoscroll();
+
+ void createChar(uint8_t, uint8_t[]);
+ void setCursor(uint8_t, uint8_t);
+ virtual size_t write(uint8_t);
+ void command(uint8_t);
+
+ using Print::write;
+private:
+ void send(uint8_t, uint8_t);
+ void write4bits(uint8_t);
+ void write8bits(uint8_t);
+ void pulseEnable();
+
+ uint8_t _rs_pin; // LOW: command. HIGH: character.
+ uint8_t _rw_pin; // LOW: write to LCD. HIGH: read from LCD.
+ uint8_t _enable_pin; // activated by a HIGH pulse.
+ uint8_t _data_pins[8];
+
+ uint8_t _displayfunction;
+ uint8_t _displaycontrol;
+ uint8_t _displaymode;
+
+ uint8_t _initialized;
+
+ uint8_t _numlines,_currline;
+};
+
+#endif
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/LiquidCrystal/keywords.txt b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/LiquidCrystal/keywords.txt
new file mode 100644
index 0000000000..132845cb65
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/LiquidCrystal/keywords.txt
@@ -0,0 +1,37 @@
+#######################################
+# Syntax Coloring Map For LiquidCrystal
+#######################################
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+
+LiquidCrystal KEYWORD1
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+
+begin KEYWORD2
+clear KEYWORD2
+home KEYWORD2
+print KEYWORD2
+setCursor KEYWORD2
+cursor KEYWORD2
+noCursor KEYWORD2
+blink KEYWORD2
+noBlink KEYWORD2
+display KEYWORD2
+noDisplay KEYWORD2
+autoscroll KEYWORD2
+noAutoscroll KEYWORD2
+leftToRight KEYWORD2
+rightToLeft KEYWORD2
+scrollDisplayLeft KEYWORD2
+scrollDisplayRight KEYWORD2
+createChar KEYWORD2
+
+#######################################
+# Constants (LITERAL1)
+#######################################
+
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/SPI/SPI.cpp b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/SPI/SPI.cpp
new file mode 100644
index 0000000000..5e48073f73
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/SPI/SPI.cpp
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2010 by Cristian Maglie <c.maglie@bug.st>
+ * SPI Master library for arduino.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of either the GNU General Public License version 2
+ * or the GNU Lesser General Public License version 2.1, both as
+ * published by the Free Software Foundation.
+ */
+
+#include "pins_arduino.h"
+#include "SPI.h"
+
+SPIClass SPI;
+
+void SPIClass::begin() {
+
+ // Set SS to high so a connected chip will be "deselected" by default
+ digitalWrite(SS, HIGH);
+
+ // When the SS pin is set as OUTPUT, it can be used as
+ // a general purpose output port (it doesn't influence
+ // SPI operations).
+ pinMode(SS, OUTPUT);
+
+ // Warning: if the SS pin ever becomes a LOW INPUT then SPI
+ // automatically switches to Slave, so the data direction of
+ // the SS pin MUST be kept as OUTPUT.
+ SPCR |= _BV(MSTR);
+ SPCR |= _BV(SPE);
+
+ // Set direction register for SCK and MOSI pin.
+ // MISO pin automatically overrides to INPUT.
+ // By doing this AFTER enabling SPI, we avoid accidentally
+ // clocking in a single bit since the lines go directly
+ // from "input" to SPI control.
+ // http://code.google.com/p/arduino/issues/detail?id=888
+ pinMode(SCK, OUTPUT);
+ pinMode(MOSI, OUTPUT);
+}
+
+
+void SPIClass::end() {
+ SPCR &= ~_BV(SPE);
+}
+
+void SPIClass::setBitOrder(uint8_t bitOrder)
+{
+ if(bitOrder == LSBFIRST) {
+ SPCR |= _BV(DORD);
+ } else {
+ SPCR &= ~(_BV(DORD));
+ }
+}
+
+void SPIClass::setDataMode(uint8_t mode)
+{
+ SPCR = (SPCR & ~SPI_MODE_MASK) | mode;
+}
+
+void SPIClass::setClockDivider(uint8_t rate)
+{
+ SPCR = (SPCR & ~SPI_CLOCK_MASK) | (rate & SPI_CLOCK_MASK);
+ SPSR = (SPSR & ~SPI_2XCLOCK_MASK) | ((rate >> 2) & SPI_2XCLOCK_MASK);
+}
+
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/SPI/SPI.h b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/SPI/SPI.h
new file mode 100644
index 0000000000..f647d5c891
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/SPI/SPI.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2010 by Cristian Maglie <c.maglie@bug.st>
+ * SPI Master library for arduino.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of either the GNU General Public License version 2
+ * or the GNU Lesser General Public License version 2.1, both as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _SPI_H_INCLUDED
+#define _SPI_H_INCLUDED
+
+#include <stdio.h>
+#include <Arduino.h>
+#include <avr/pgmspace.h>
+
+#define SPI_CLOCK_DIV4 0x00
+#define SPI_CLOCK_DIV16 0x01
+#define SPI_CLOCK_DIV64 0x02
+#define SPI_CLOCK_DIV128 0x03
+#define SPI_CLOCK_DIV2 0x04
+#define SPI_CLOCK_DIV8 0x05
+#define SPI_CLOCK_DIV32 0x06
+//#define SPI_CLOCK_DIV64 0x07
+
+#define SPI_MODE0 0x00
+#define SPI_MODE1 0x04
+#define SPI_MODE2 0x08
+#define SPI_MODE3 0x0C
+
+#define SPI_MODE_MASK 0x0C // CPOL = bit 3, CPHA = bit 2 on SPCR
+#define SPI_CLOCK_MASK 0x03 // SPR1 = bit 1, SPR0 = bit 0 on SPCR
+#define SPI_2XCLOCK_MASK 0x01 // SPI2X = bit 0 on SPSR
+
+class SPIClass {
+public:
+ inline static byte transfer(byte _data);
+
+ // SPI Configuration methods
+
+ inline static void attachInterrupt();
+ inline static void detachInterrupt(); // Default
+
+ static void begin(); // Default
+ static void end();
+
+ static void setBitOrder(uint8_t);
+ static void setDataMode(uint8_t);
+ static void setClockDivider(uint8_t);
+};
+
+extern SPIClass SPI;
+
+byte SPIClass::transfer(byte _data) {
+ SPDR = _data;
+ while (!(SPSR & _BV(SPIF)))
+ ;
+ return SPDR;
+}
+
+void SPIClass::attachInterrupt() {
+ SPCR |= _BV(SPIE);
+}
+
+void SPIClass::detachInterrupt() {
+ SPCR &= ~_BV(SPIE);
+}
+
+#endif
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/SPI/keywords.txt b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/SPI/keywords.txt
new file mode 100644
index 0000000000..fa7616581a
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/SPI/keywords.txt
@@ -0,0 +1,36 @@
+#######################################
+# Syntax Coloring Map SPI
+#######################################
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+
+SPI KEYWORD1
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+begin KEYWORD2
+end KEYWORD2
+transfer KEYWORD2
+setBitOrder KEYWORD2
+setDataMode KEYWORD2
+setClockDivider KEYWORD2
+
+
+#######################################
+# Constants (LITERAL1)
+#######################################
+SPI_CLOCK_DIV4 LITERAL1
+SPI_CLOCK_DIV16 LITERAL1
+SPI_CLOCK_DIV64 LITERAL1
+SPI_CLOCK_DIV128 LITERAL1
+SPI_CLOCK_DIV2 LITERAL1
+SPI_CLOCK_DIV8 LITERAL1
+SPI_CLOCK_DIV32 LITERAL1
+SPI_CLOCK_DIV64 LITERAL1
+SPI_MODE0 LITERAL1
+SPI_MODE1 LITERAL1
+SPI_MODE2 LITERAL1
+SPI_MODE3 LITERAL1
\ No newline at end of file
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/Wire.cpp b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/Wire.cpp
new file mode 100644
index 0000000000..553add7822
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/Wire.cpp
@@ -0,0 +1,303 @@
+/*
+ TwoWire.cpp - TWI/I2C library for Wiring & Arduino
+ Copyright (c) 2006 Nicholas Zambetti. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ Modified 2012 by Todd Krein (todd@krein.org) to implement repeated starts
+*/
+
+extern "C" {
+ #include <stdlib.h>
+ #include <string.h>
+ #include <inttypes.h>
+ #include "twi.h"
+}
+
+#include "Wire.h"
+
+// Initialize Class Variables //////////////////////////////////////////////////
+
+uint8_t TwoWire::rxBuffer[BUFFER_LENGTH];
+uint8_t TwoWire::rxBufferIndex = 0;
+uint8_t TwoWire::rxBufferLength = 0;
+
+uint8_t TwoWire::txAddress = 0;
+uint8_t TwoWire::txBuffer[BUFFER_LENGTH];
+uint8_t TwoWire::txBufferIndex = 0;
+uint8_t TwoWire::txBufferLength = 0;
+
+uint8_t TwoWire::transmitting = 0;
+void (*TwoWire::user_onRequest)(void);
+void (*TwoWire::user_onReceive)(int);
+
+// Constructors ////////////////////////////////////////////////////////////////
+
+TwoWire::TwoWire()
+{
+}
+
+// Public Methods //////////////////////////////////////////////////////////////
+
+void TwoWire::begin(void)
+{
+ rxBufferIndex = 0;
+ rxBufferLength = 0;
+
+ txBufferIndex = 0;
+ txBufferLength = 0;
+
+ twi_init();
+}
+
+void TwoWire::begin(uint8_t address)
+{
+ twi_setAddress(address);
+ twi_attachSlaveTxEvent(onRequestService);
+ twi_attachSlaveRxEvent(onReceiveService);
+ begin();
+}
+
+void TwoWire::begin(int address)
+{
+ begin((uint8_t)address);
+}
+
+void TwoWire::setClock(uint32_t frequency)
+{
+ TWBR = ((F_CPU / frequency) - 16) / 2;
+}
+
+uint8_t TwoWire::requestFrom(uint8_t address, uint8_t quantity, uint8_t sendStop)
+{
+ // clamp to buffer length
+ if(quantity > BUFFER_LENGTH){
+ quantity = BUFFER_LENGTH;
+ }
+ // perform blocking read into buffer
+ uint8_t read = twi_readFrom(address, rxBuffer, quantity, sendStop);
+ // set rx buffer iterator vars
+ rxBufferIndex = 0;
+ rxBufferLength = read;
+
+ return read;
+}
+
+uint8_t TwoWire::requestFrom(uint8_t address, uint8_t quantity)
+{
+ return requestFrom((uint8_t)address, (uint8_t)quantity, (uint8_t)true);
+}
+
+uint8_t TwoWire::requestFrom(int address, int quantity)
+{
+ return requestFrom((uint8_t)address, (uint8_t)quantity, (uint8_t)true);
+}
+
+uint8_t TwoWire::requestFrom(int address, int quantity, int sendStop)
+{
+ return requestFrom((uint8_t)address, (uint8_t)quantity, (uint8_t)sendStop);
+}
+
+void TwoWire::beginTransmission(uint8_t address)
+{
+ // indicate that we are transmitting
+ transmitting = 1;
+ // set address of targeted slave
+ txAddress = address;
+ // reset tx buffer iterator vars
+ txBufferIndex = 0;
+ txBufferLength = 0;
+}
+
+void TwoWire::beginTransmission(int address)
+{
+ beginTransmission((uint8_t)address);
+}
+
+//
+// Originally, 'endTransmission' was an f(void) function.
+// It has been modified to take one parameter indicating
+// whether or not a STOP should be performed on the bus.
+// Calling endTransmission(false) allows a sketch to
+// perform a repeated start.
+//
+// WARNING: Nothing in the library keeps track of whether
+// the bus tenure has been properly ended with a STOP. It
+// is very possible to leave the bus in a hung state if
+// no call to endTransmission(true) is made. Some I2C
+// devices will behave oddly if they do not see a STOP.
+//
+uint8_t TwoWire::endTransmission(uint8_t sendStop)
+{
+ // transmit buffer (blocking)
+ int8_t ret = twi_writeTo(txAddress, txBuffer, txBufferLength, 1, sendStop);
+ // reset tx buffer iterator vars
+ txBufferIndex = 0;
+ txBufferLength = 0;
+ // indicate that we are done transmitting
+ transmitting = 0;
+ return ret;
+}
+
+// This provides backwards compatibility with the original
+// definition, and expected behaviour, of endTransmission
+//
+uint8_t TwoWire::endTransmission(void)
+{
+ return endTransmission(true);
+}
+
+// must be called in:
+// slave tx event callback
+// or after beginTransmission(address)
+size_t TwoWire::write(uint8_t data)
+{
+ if(transmitting){
+ // in master transmitter mode
+ // don't bother if buffer is full
+ if(txBufferLength >= BUFFER_LENGTH){
+ setWriteError();
+ return 0;
+ }
+ // put byte in tx buffer
+ txBuffer[txBufferIndex] = data;
+ ++txBufferIndex;
+ // update amount in buffer
+ txBufferLength = txBufferIndex;
+ }else{
+ // in slave send mode
+ // reply to master
+ twi_transmit(&data, 1);
+ }
+ return 1;
+}
+
+// must be called in:
+// slave tx event callback
+// or after beginTransmission(address)
+size_t TwoWire::write(const uint8_t *data, size_t quantity)
+{
+ if(transmitting){
+ // in master transmitter mode
+ for(size_t i = 0; i < quantity; ++i){
+ write(data[i]);
+ }
+ }else{
+ // in slave send mode
+ // reply to master
+ twi_transmit(data, quantity);
+ }
+ return quantity;
+}
+
+// must be called in:
+// slave rx event callback
+// or after requestFrom(address, numBytes)
+int TwoWire::available(void)
+{
+ return rxBufferLength - rxBufferIndex;
+}
+
+// must be called in:
+// slave rx event callback
+// or after requestFrom(address, numBytes)
+int TwoWire::read(void)
+{
+ int value = -1;
+
+ // get each successive byte on each call
+ if(rxBufferIndex < rxBufferLength){
+ value = rxBuffer[rxBufferIndex];
+ ++rxBufferIndex;
+ }
+
+ return value;
+}
+
+// must be called in:
+// slave rx event callback
+// or after requestFrom(address, numBytes)
+int TwoWire::peek(void)
+{
+ int value = -1;
+
+ if(rxBufferIndex < rxBufferLength){
+ value = rxBuffer[rxBufferIndex];
+ }
+
+ return value;
+}
+
+void TwoWire::flush(void)
+{
+ // XXX: to be implemented.
+}
+
+// behind the scenes function that is called when data is received
+void TwoWire::onReceiveService(uint8_t* inBytes, int numBytes)
+{
+ // don't bother if user hasn't registered a callback
+ if(!user_onReceive){
+ return;
+ }
+ // don't bother if rx buffer is in use by a master requestFrom() op
+ // i know this drops data, but it allows for slight stupidity
+ // meaning, they may not have read all the master requestFrom() data yet
+ if(rxBufferIndex < rxBufferLength){
+ return;
+ }
+ // copy twi rx buffer into local read buffer
+ // this enables new reads to happen in parallel
+ for(uint8_t i = 0; i < numBytes; ++i){
+ rxBuffer[i] = inBytes[i];
+ }
+ // set rx iterator vars
+ rxBufferIndex = 0;
+ rxBufferLength = numBytes;
+ // alert user program
+ user_onReceive(numBytes);
+}
+
+// behind the scenes function that is called when data is requested
+void TwoWire::onRequestService(void)
+{
+ // don't bother if user hasn't registered a callback
+ if(!user_onRequest){
+ return;
+ }
+ // reset tx buffer iterator vars
+ // !!! this will kill any pending pre-master sendTo() activity
+ txBufferIndex = 0;
+ txBufferLength = 0;
+ // alert user program
+ user_onRequest();
+}
+
+// sets function called on slave write
+void TwoWire::onReceive( void (*function)(int) )
+{
+ user_onReceive = function;
+}
+
+// sets function called on slave read
+void TwoWire::onRequest( void (*function)(void) )
+{
+ user_onRequest = function;
+}
+
+// Preinstantiate Objects //////////////////////////////////////////////////////
+
+TwoWire Wire = TwoWire();
+
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/Wire.h b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/Wire.h
new file mode 100644
index 0000000000..732bdc314e
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/Wire.h
@@ -0,0 +1,80 @@
+/*
+ TwoWire.h - TWI/I2C library for Arduino & Wiring
+ Copyright (c) 2006 Nicholas Zambetti. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ Modified 2012 by Todd Krein (todd@krein.org) to implement repeated starts
+*/
+
+#ifndef TwoWire_h
+#define TwoWire_h
+
+#include <inttypes.h>
+#include "Stream.h"
+
+#define BUFFER_LENGTH 32
+
+class TwoWire : public Stream
+{
+ private:
+ static uint8_t rxBuffer[];
+ static uint8_t rxBufferIndex;
+ static uint8_t rxBufferLength;
+
+ static uint8_t txAddress;
+ static uint8_t txBuffer[];
+ static uint8_t txBufferIndex;
+ static uint8_t txBufferLength;
+
+ static uint8_t transmitting;
+ static void (*user_onRequest)(void);
+ static void (*user_onReceive)(int);
+ static void onRequestService(void);
+ static void onReceiveService(uint8_t*, int);
+ public:
+ TwoWire();
+ void begin();
+ void begin(uint8_t);
+ void begin(int);
+ void setClock(uint32_t);
+ void beginTransmission(uint8_t);
+ void beginTransmission(int);
+ uint8_t endTransmission(void);
+ uint8_t endTransmission(uint8_t);
+ uint8_t requestFrom(uint8_t, uint8_t);
+ uint8_t requestFrom(uint8_t, uint8_t, uint8_t);
+ uint8_t requestFrom(int, int);
+ uint8_t requestFrom(int, int, int);
+ virtual size_t write(uint8_t);
+ virtual size_t write(const uint8_t *, size_t);
+ virtual int available(void);
+ virtual int read(void);
+ virtual int peek(void);
+ virtual void flush(void);
+ void onReceive( void (*)(int) );
+ void onRequest( void (*)(void) );
+
+ inline size_t write(unsigned long n) { return write((uint8_t)n); }
+ inline size_t write(long n) { return write((uint8_t)n); }
+ inline size_t write(unsigned int n) { return write((uint8_t)n); }
+ inline size_t write(int n) { return write((uint8_t)n); }
+ using Print::write;
+};
+
+extern TwoWire Wire;
+
+#endif
+
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino
new file mode 100644
index 0000000000..d97a9e3cf8
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino
@@ -0,0 +1,87 @@
+// I2C SRF10 or SRF08 Devantech Ultrasonic Ranger Finder
+// by Nicholas Zambetti <http://www.zambetti.com>
+// and James Tichenor <http://www.jamestichenor.net>
+
+// Demonstrates use of the Wire library reading data from the
+// Devantech Utrasonic Rangers SFR08 and SFR10
+
+// Created 29 April 2006
+
+// This example code is in the public domain.
+
+
+#include <Wire.h>
+
+void setup()
+{
+ Wire.begin(); // join i2c bus (address optional for master)
+ Serial.begin(9600); // start serial communication at 9600bps
+}
+
+int reading = 0;
+
+void loop()
+{
+ // step 1: instruct sensor to read echoes
+ Wire.beginTransmission(112); // transmit to device #112 (0x70)
+ // the address specified in the datasheet is 224 (0xE0)
+ // but i2c adressing uses the high 7 bits so it's 112
+ Wire.write(byte(0x00)); // sets register pointer to the command register (0x00)
+ Wire.write(byte(0x50)); // command sensor to measure in "inches" (0x50)
+ // use 0x51 for centimeters
+ // use 0x52 for ping microseconds
+ Wire.endTransmission(); // stop transmitting
+
+ // step 2: wait for readings to happen
+ delay(70); // datasheet suggests at least 65 milliseconds
+
+ // step 3: instruct sensor to return a particular echo reading
+ Wire.beginTransmission(112); // transmit to device #112
+ Wire.write(byte(0x02)); // sets register pointer to echo #1 register (0x02)
+ Wire.endTransmission(); // stop transmitting
+
+ // step 4: request reading from sensor
+ Wire.requestFrom(112, 2); // request 2 bytes from slave device #112
+
+ // step 5: receive reading from sensor
+ if (2 <= Wire.available()) // if two bytes were received
+ {
+ reading = Wire.read(); // receive high byte (overwrites previous reading)
+ reading = reading << 8; // shift high byte to be high 8 bits
+ reading |= Wire.read(); // receive low byte as lower 8 bits
+ Serial.println(reading); // print the reading
+ }
+
+ delay(250); // wait a bit since people have to read the output :)
+}
+
+
+/*
+
+// The following code changes the address of a Devantech Ultrasonic Range Finder (SRF10 or SRF08)
+// usage: changeAddress(0x70, 0xE6);
+
+void changeAddress(byte oldAddress, byte newAddress)
+{
+ Wire.beginTransmission(oldAddress);
+ Wire.write(byte(0x00));
+ Wire.write(byte(0xA0));
+ Wire.endTransmission();
+
+ Wire.beginTransmission(oldAddress);
+ Wire.write(byte(0x00));
+ Wire.write(byte(0xAA));
+ Wire.endTransmission();
+
+ Wire.beginTransmission(oldAddress);
+ Wire.write(byte(0x00));
+ Wire.write(byte(0xA5));
+ Wire.endTransmission();
+
+ Wire.beginTransmission(oldAddress);
+ Wire.write(byte(0x00));
+ Wire.write(newAddress);
+ Wire.endTransmission();
+}
+
+*/
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino
new file mode 100644
index 0000000000..4d1580a61e
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino
@@ -0,0 +1,39 @@
+// I2C Digital Potentiometer
+// by Nicholas Zambetti <http://www.zambetti.com>
+// and Shawn Bonkowski <http://people.interaction-ivrea.it/s.bonkowski/>
+
+// Demonstrates use of the Wire library
+// Controls AD5171 digital potentiometer via I2C/TWI
+
+// Created 31 March 2006
+
+// This example code is in the public domain.
+
+// This example code is in the public domain.
+
+
+#include <Wire.h>
+
+void setup()
+{
+ Wire.begin(); // join i2c bus (address optional for master)
+}
+
+byte val = 0;
+
+void loop()
+{
+ Wire.beginTransmission(44); // transmit to device #44 (0x2c)
+ // device address is specified in datasheet
+ Wire.write(byte(0x00)); // sends instruction byte
+ Wire.write(val); // sends potentiometer value byte
+ Wire.endTransmission(); // stop transmitting
+
+ val++; // increment value
+ if (val == 64) // if reached 64th position (max)
+ {
+ val = 0; // start over from lowest value
+ }
+ delay(500);
+}
+
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/master_reader/master_reader.ino b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/master_reader/master_reader.ino
new file mode 100644
index 0000000000..74f0155f8e
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/master_reader/master_reader.ino
@@ -0,0 +1,32 @@
+// Wire Master Reader
+// by Nicholas Zambetti <http://www.zambetti.com>
+
+// Demonstrates use of the Wire library
+// Reads data from an I2C/TWI slave device
+// Refer to the "Wire Slave Sender" example for use with this
+
+// Created 29 March 2006
+
+// This example code is in the public domain.
+
+
+#include <Wire.h>
+
+void setup()
+{
+ Wire.begin(); // join i2c bus (address optional for master)
+ Serial.begin(9600); // start serial for output
+}
+
+void loop()
+{
+ Wire.requestFrom(2, 6); // request 6 bytes from slave device #2
+
+ while (Wire.available()) // slave may send less than requested
+ {
+ char c = Wire.read(); // receive a byte as character
+ Serial.print(c); // print the character
+ }
+
+ delay(500);
+}
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/master_writer/master_writer.ino b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/master_writer/master_writer.ino
new file mode 100644
index 0000000000..482e922379
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/master_writer/master_writer.ino
@@ -0,0 +1,31 @@
+// Wire Master Writer
+// by Nicholas Zambetti <http://www.zambetti.com>
+
+// Demonstrates use of the Wire library
+// Writes data to an I2C/TWI slave device
+// Refer to the "Wire Slave Receiver" example for use with this
+
+// Created 29 March 2006
+
+// This example code is in the public domain.
+
+
+#include <Wire.h>
+
+void setup()
+{
+ Wire.begin(); // join i2c bus (address optional for master)
+}
+
+byte x = 0;
+
+void loop()
+{
+ Wire.beginTransmission(4); // transmit to device #4
+ Wire.write("x is "); // sends five bytes
+ Wire.write(x); // sends one byte
+ Wire.endTransmission(); // stop transmitting
+
+ x++;
+ delay(500);
+}
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/slave_receiver/slave_receiver.ino b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/slave_receiver/slave_receiver.ino
new file mode 100644
index 0000000000..15eff9a545
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/slave_receiver/slave_receiver.ino
@@ -0,0 +1,38 @@
+// Wire Slave Receiver
+// by Nicholas Zambetti <http://www.zambetti.com>
+
+// Demonstrates use of the Wire library
+// Receives data as an I2C/TWI slave device
+// Refer to the "Wire Master Writer" example for use with this
+
+// Created 29 March 2006
+
+// This example code is in the public domain.
+
+
+#include <Wire.h>
+
+void setup()
+{
+ Wire.begin(4); // join i2c bus with address #4
+ Wire.onReceive(receiveEvent); // register event
+ Serial.begin(9600); // start serial for output
+}
+
+void loop()
+{
+ delay(100);
+}
+
+// function that executes whenever data is received from master
+// this function is registered as an event, see setup()
+void receiveEvent(int howMany)
+{
+ while (1 < Wire.available()) // loop through all but the last
+ {
+ char c = Wire.read(); // receive byte as a character
+ Serial.print(c); // print the character
+ }
+ int x = Wire.read(); // receive byte as an integer
+ Serial.println(x); // print the integer
+}
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/slave_sender/slave_sender.ino b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/slave_sender/slave_sender.ino
new file mode 100644
index 0000000000..4437ab1521
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/examples/slave_sender/slave_sender.ino
@@ -0,0 +1,32 @@
+// Wire Slave Sender
+// by Nicholas Zambetti <http://www.zambetti.com>
+
+// Demonstrates use of the Wire library
+// Sends data as an I2C/TWI slave device
+// Refer to the "Wire Master Reader" example for use with this
+
+// Created 29 March 2006
+
+// This example code is in the public domain.
+
+
+#include <Wire.h>
+
+void setup()
+{
+ Wire.begin(2); // join i2c bus with address #2
+ Wire.onRequest(requestEvent); // register event
+}
+
+void loop()
+{
+ delay(100);
+}
+
+// function that executes whenever data is requested by master
+// this function is registered as an event, see setup()
+void requestEvent()
+{
+ Wire.write("hello "); // respond with message of 6 bytes
+ // as expected by master
+}
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/keywords.txt b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/keywords.txt
new file mode 100644
index 0000000000..ff31475920
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/keywords.txt
@@ -0,0 +1,32 @@
+#######################################
+# Syntax Coloring Map For Wire
+#######################################
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+
+begin KEYWORD2
+setClock KEYWORD2
+beginTransmission KEYWORD2
+endTransmission KEYWORD2
+requestFrom KEYWORD2
+send KEYWORD2
+receive KEYWORD2
+onReceive KEYWORD2
+onRequest KEYWORD2
+
+#######################################
+# Instances (KEYWORD2)
+#######################################
+
+Wire KEYWORD2
+
+#######################################
+# Constants (LITERAL1)
+#######################################
+
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/library.properties b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/library.properties
new file mode 100644
index 0000000000..3246a75098
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/library.properties
@@ -0,0 +1,8 @@
+name=Wire
+version=1.0
+author=Arduino
+maintainer=Arduino <info@arduino.cc>
+sentence=Allows the communication between devices or sensors connected via Two Wire Interface Bus. For all Arduino boards, BUT Arduino DUE.
+paragraph=
+url=http://arduino.cc/en/Reference/Wire
+architectures=avr
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/utility/twi.c b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/utility/twi.c
new file mode 100644
index 0000000000..201d7d1bbb
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/utility/twi.c
@@ -0,0 +1,527 @@
+/*
+ twi.c - TWI/I2C library for Wiring & Arduino
+ Copyright (c) 2006 Nicholas Zambetti. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ Modified 2012 by Todd Krein (todd@krein.org) to implement repeated starts
+*/
+
+#include <math.h>
+#include <stdlib.h>
+#include <inttypes.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <compat/twi.h>
+#include "Arduino.h" // for digitalWrite
+
+#ifndef cbi
+#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+#endif
+
+#ifndef sbi
+#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+#endif
+
+#include "pins_arduino.h"
+#include "twi.h"
+
+static volatile uint8_t twi_state;
+static volatile uint8_t twi_slarw;
+static volatile uint8_t twi_sendStop; // should the transaction end with a stop
+static volatile uint8_t twi_inRepStart; // in the middle of a repeated start
+
+static void (*twi_onSlaveTransmit)(void);
+static void (*twi_onSlaveReceive)(uint8_t*, int);
+
+static uint8_t twi_masterBuffer[TWI_BUFFER_LENGTH];
+static volatile uint8_t twi_masterBufferIndex;
+static volatile uint8_t twi_masterBufferLength;
+
+static uint8_t twi_txBuffer[TWI_BUFFER_LENGTH];
+static volatile uint8_t twi_txBufferIndex;
+static volatile uint8_t twi_txBufferLength;
+
+static uint8_t twi_rxBuffer[TWI_BUFFER_LENGTH];
+static volatile uint8_t twi_rxBufferIndex;
+
+static volatile uint8_t twi_error;
+
+/*
+ * Function twi_init
+ * Desc readys twi pins and sets twi bitrate
+ * Input none
+ * Output none
+ */
+void twi_init(void)
+{
+ // initialize state
+ twi_state = TWI_READY;
+ twi_sendStop = true; // default value
+ twi_inRepStart = false;
+
+ // activate internal pullups for twi.
+ digitalWrite(SDA, 1);
+ digitalWrite(SCL, 1);
+
+ // initialize twi prescaler and bit rate
+ cbi(TWSR, TWPS0);
+ cbi(TWSR, TWPS1);
+ TWBR = ((F_CPU / TWI_FREQ) - 16) / 2;
+
+ /* twi bit rate formula from atmega128 manual pg 204
+ SCL Frequency = CPU Clock Frequency / (16 + (2 * TWBR))
+ note: TWBR should be 10 or higher for master mode
+ It is 72 for a 16mhz Wiring board with 100kHz TWI */
+
+ // enable twi module, acks, and twi interrupt
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA);
+}
+
+/*
+ * Function twi_slaveInit
+ * Desc sets slave address and enables interrupt
+ * Input none
+ * Output none
+ */
+void twi_setAddress(uint8_t address)
+{
+ // set twi slave address (skip over TWGCE bit)
+ TWAR = address << 1;
+}
+
+/*
+ * Function twi_readFrom
+ * Desc attempts to become twi bus master and read a
+ * series of bytes from a device on the bus
+ * Input address: 7bit i2c device address
+ * data: pointer to byte array
+ * length: number of bytes to read into array
+ * sendStop: Boolean indicating whether to send a stop at the end
+ * Output number of bytes read
+ */
+uint8_t twi_readFrom(uint8_t address, uint8_t* data, uint8_t length, uint8_t sendStop)
+{
+ uint8_t i;
+
+ // ensure data will fit into buffer
+ if(TWI_BUFFER_LENGTH < length){
+ return 0;
+ }
+
+ // wait until twi is ready, become master receiver
+ while(TWI_READY != twi_state){
+ continue;
+ }
+ twi_state = TWI_MRX;
+ twi_sendStop = sendStop;
+ // reset error state (0xFF.. no error occured)
+ twi_error = 0xFF;
+
+ // initialize buffer iteration vars
+ twi_masterBufferIndex = 0;
+ twi_masterBufferLength = length-1; // This is not intuitive, read on...
+ // On receive, the previously configured ACK/NACK setting is transmitted in
+ // response to the received byte before the interrupt is signalled.
+ // Therefor we must actually set NACK when the _next_ to last byte is
+ // received, causing that NACK to be sent in response to receiving the last
+ // expected byte of data.
+
+ // build sla+w, slave device address + w bit
+ twi_slarw = TW_READ;
+ twi_slarw |= address << 1;
+
+ if (true == twi_inRepStart) {
+ // if we're in the repeated start state, then we've already sent the start,
+ // (@@@ we hope), and the TWI statemachine is just waiting for the address byte.
+ // We need to remove ourselves from the repeated start state before we enable interrupts,
+ // since the ISR is ASYNC, and we could get confused if we hit the ISR before cleaning
+ // up. Also, don't enable the START interrupt. There may be one pending from the
+ // repeated start that we sent outselves, and that would really confuse things.
+ twi_inRepStart = false; // remember, we're dealing with an ASYNC ISR
+ TWDR = twi_slarw;
+ TWCR = _BV(TWINT) | _BV(TWEA) | _BV(TWEN) | _BV(TWIE); // enable INTs, but not START
+ }
+ else
+ // send start condition
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
+
+ // wait for read operation to complete
+ while(TWI_MRX == twi_state){
+ continue;
+ }
+
+ if (twi_masterBufferIndex < length)
+ length = twi_masterBufferIndex;
+
+ // copy twi buffer to data
+ for(i = 0; i < length; ++i){
+ data[i] = twi_masterBuffer[i];
+ }
+
+ return length;
+}
+
+/*
+ * Function twi_writeTo
+ * Desc attempts to become twi bus master and write a
+ * series of bytes to a device on the bus
+ * Input address: 7bit i2c device address
+ * data: pointer to byte array
+ * length: number of bytes in array
+ * wait: boolean indicating to wait for write or not
+ * sendStop: boolean indicating whether or not to send a stop at the end
+ * Output 0 .. success
+ * 1 .. length to long for buffer
+ * 2 .. address send, NACK received
+ * 3 .. data send, NACK received
+ * 4 .. other twi error (lost bus arbitration, bus error, ..)
+ */
+uint8_t twi_writeTo(uint8_t address, uint8_t* data, uint8_t length, uint8_t wait, uint8_t sendStop)
+{
+ uint8_t i;
+
+ // ensure data will fit into buffer
+ if(TWI_BUFFER_LENGTH < length){
+ return 1;
+ }
+
+ // wait until twi is ready, become master transmitter
+ while(TWI_READY != twi_state){
+ continue;
+ }
+ twi_state = TWI_MTX;
+ twi_sendStop = sendStop;
+ // reset error state (0xFF.. no error occured)
+ twi_error = 0xFF;
+
+ // initialize buffer iteration vars
+ twi_masterBufferIndex = 0;
+ twi_masterBufferLength = length;
+
+ // copy data to twi buffer
+ for(i = 0; i < length; ++i){
+ twi_masterBuffer[i] = data[i];
+ }
+
+ // build sla+w, slave device address + w bit
+ twi_slarw = TW_WRITE;
+ twi_slarw |= address << 1;
+
+ // if we're in a repeated start, then we've already sent the START
+ // in the ISR. Don't do it again.
+ //
+ if (true == twi_inRepStart) {
+ // if we're in the repeated start state, then we've already sent the start,
+ // (@@@ we hope), and the TWI statemachine is just waiting for the address byte.
+ // We need to remove ourselves from the repeated start state before we enable interrupts,
+ // since the ISR is ASYNC, and we could get confused if we hit the ISR before cleaning
+ // up. Also, don't enable the START interrupt. There may be one pending from the
+ // repeated start that we sent outselves, and that would really confuse things.
+ twi_inRepStart = false; // remember, we're dealing with an ASYNC ISR
+ TWDR = twi_slarw;
+ TWCR = _BV(TWINT) | _BV(TWEA) | _BV(TWEN) | _BV(TWIE); // enable INTs, but not START
+ }
+ else
+ // send start condition
+ TWCR = _BV(TWINT) | _BV(TWEA) | _BV(TWEN) | _BV(TWIE) | _BV(TWSTA); // enable INTs
+
+ // wait for write operation to complete
+ while(wait && (TWI_MTX == twi_state)){
+ continue;
+ }
+
+ if (twi_error == 0xFF)
+ return 0; // success
+ else if (twi_error == TW_MT_SLA_NACK)
+ return 2; // error: address send, nack received
+ else if (twi_error == TW_MT_DATA_NACK)
+ return 3; // error: data send, nack received
+ else
+ return 4; // other twi error
+}
+
+/*
+ * Function twi_transmit
+ * Desc fills slave tx buffer with data
+ * must be called in slave tx event callback
+ * Input data: pointer to byte array
+ * length: number of bytes in array
+ * Output 1 length too long for buffer
+ * 2 not slave transmitter
+ * 0 ok
+ */
+uint8_t twi_transmit(const uint8_t* data, uint8_t length)
+{
+ uint8_t i;
+
+ // ensure data will fit into buffer
+ if(TWI_BUFFER_LENGTH < length){
+ return 1;
+ }
+
+ // ensure we are currently a slave transmitter
+ if(TWI_STX != twi_state){
+ return 2;
+ }
+
+ // set length and copy data into tx buffer
+ twi_txBufferLength = length;
+ for(i = 0; i < length; ++i){
+ twi_txBuffer[i] = data[i];
+ }
+
+ return 0;
+}
+
+/*
+ * Function twi_attachSlaveRxEvent
+ * Desc sets function called before a slave read operation
+ * Input function: callback function to use
+ * Output none
+ */
+void twi_attachSlaveRxEvent( void (*function)(uint8_t*, int) )
+{
+ twi_onSlaveReceive = function;
+}
+
+/*
+ * Function twi_attachSlaveTxEvent
+ * Desc sets function called before a slave write operation
+ * Input function: callback function to use
+ * Output none
+ */
+void twi_attachSlaveTxEvent( void (*function)(void) )
+{
+ twi_onSlaveTransmit = function;
+}
+
+/*
+ * Function twi_reply
+ * Desc sends byte or readys receive line
+ * Input ack: byte indicating to ack or to nack
+ * Output none
+ */
+void twi_reply(uint8_t ack)
+{
+ // transmit master read ready signal, with or without ack
+ if(ack){
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA);
+ }else{
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT);
+ }
+}
+
+/*
+ * Function twi_stop
+ * Desc relinquishes bus master status
+ * Input none
+ * Output none
+ */
+void twi_stop(void)
+{
+ // send stop condition
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO);
+
+ // wait for stop condition to be exectued on bus
+ // TWINT is not set after a stop condition!
+ while(TWCR & _BV(TWSTO)){
+ continue;
+ }
+
+ // update twi state
+ twi_state = TWI_READY;
+}
+
+/*
+ * Function twi_releaseBus
+ * Desc releases bus control
+ * Input none
+ * Output none
+ */
+void twi_releaseBus(void)
+{
+ // release bus
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT);
+
+ // update twi state
+ twi_state = TWI_READY;
+}
+
+ISR(TWI_vect)
+{
+ switch(TW_STATUS){
+ // All Master
+ case TW_START: // sent start condition
+ case TW_REP_START: // sent repeated start condition
+ // copy device address and r/w bit to output register and ack
+ TWDR = twi_slarw;
+ twi_reply(1);
+ break;
+
+ // Master Transmitter
+ case TW_MT_SLA_ACK: // slave receiver acked address
+ case TW_MT_DATA_ACK: // slave receiver acked data
+ // if there is data to send, send it, otherwise stop
+ if(twi_masterBufferIndex < twi_masterBufferLength){
+ // copy data to output register and ack
+ TWDR = twi_masterBuffer[twi_masterBufferIndex++];
+ twi_reply(1);
+ }else{
+ if (twi_sendStop)
+ twi_stop();
+ else {
+ twi_inRepStart = true; // we're gonna send the START
+ // don't enable the interrupt. We'll generate the start, but we
+ // avoid handling the interrupt until we're in the next transaction,
+ // at the point where we would normally issue the start.
+ TWCR = _BV(TWINT) | _BV(TWSTA)| _BV(TWEN) ;
+ twi_state = TWI_READY;
+ }
+ }
+ break;
+ case TW_MT_SLA_NACK: // address sent, nack received
+ twi_error = TW_MT_SLA_NACK;
+ twi_stop();
+ break;
+ case TW_MT_DATA_NACK: // data sent, nack received
+ twi_error = TW_MT_DATA_NACK;
+ twi_stop();
+ break;
+ case TW_MT_ARB_LOST: // lost bus arbitration
+ twi_error = TW_MT_ARB_LOST;
+ twi_releaseBus();
+ break;
+
+ // Master Receiver
+ case TW_MR_DATA_ACK: // data received, ack sent
+ // put byte into buffer
+ twi_masterBuffer[twi_masterBufferIndex++] = TWDR;
+ case TW_MR_SLA_ACK: // address sent, ack received
+ // ack if more bytes are expected, otherwise nack
+ if(twi_masterBufferIndex < twi_masterBufferLength){
+ twi_reply(1);
+ }else{
+ twi_reply(0);
+ }
+ break;
+ case TW_MR_DATA_NACK: // data received, nack sent
+ // put final byte into buffer
+ twi_masterBuffer[twi_masterBufferIndex++] = TWDR;
+ if (twi_sendStop)
+ twi_stop();
+ else {
+ twi_inRepStart = true; // we're gonna send the START
+ // don't enable the interrupt. We'll generate the start, but we
+ // avoid handling the interrupt until we're in the next transaction,
+ // at the point where we would normally issue the start.
+ TWCR = _BV(TWINT) | _BV(TWSTA)| _BV(TWEN) ;
+ twi_state = TWI_READY;
+ }
+ break;
+ case TW_MR_SLA_NACK: // address sent, nack received
+ twi_stop();
+ break;
+ // TW_MR_ARB_LOST handled by TW_MT_ARB_LOST case
+
+ // Slave Receiver
+ case TW_SR_SLA_ACK: // addressed, returned ack
+ case TW_SR_GCALL_ACK: // addressed generally, returned ack
+ case TW_SR_ARB_LOST_SLA_ACK: // lost arbitration, returned ack
+ case TW_SR_ARB_LOST_GCALL_ACK: // lost arbitration, returned ack
+ // enter slave receiver mode
+ twi_state = TWI_SRX;
+ // indicate that rx buffer can be overwritten and ack
+ twi_rxBufferIndex = 0;
+ twi_reply(1);
+ break;
+ case TW_SR_DATA_ACK: // data received, returned ack
+ case TW_SR_GCALL_DATA_ACK: // data received generally, returned ack
+ // if there is still room in the rx buffer
+ if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){
+ // put byte in buffer and ack
+ twi_rxBuffer[twi_rxBufferIndex++] = TWDR;
+ twi_reply(1);
+ }else{
+ // otherwise nack
+ twi_reply(0);
+ }
+ break;
+ case TW_SR_STOP: // stop or repeated start condition received
+ // put a null char after data if there's room
+ if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){
+ twi_rxBuffer[twi_rxBufferIndex] = '\0';
+ }
+ // sends ack and stops interface for clock stretching
+ twi_stop();
+ // callback to user defined callback
+ twi_onSlaveReceive(twi_rxBuffer, twi_rxBufferIndex);
+ // since we submit rx buffer to "wire" library, we can reset it
+ twi_rxBufferIndex = 0;
+ // ack future responses and leave slave receiver state
+ twi_releaseBus();
+ break;
+ case TW_SR_DATA_NACK: // data received, returned nack
+ case TW_SR_GCALL_DATA_NACK: // data received generally, returned nack
+ // nack back at master
+ twi_reply(0);
+ break;
+
+ // Slave Transmitter
+ case TW_ST_SLA_ACK: // addressed, returned ack
+ case TW_ST_ARB_LOST_SLA_ACK: // arbitration lost, returned ack
+ // enter slave transmitter mode
+ twi_state = TWI_STX;
+ // ready the tx buffer index for iteration
+ twi_txBufferIndex = 0;
+ // set tx buffer length to be zero, to verify if user changes it
+ twi_txBufferLength = 0;
+ // request for txBuffer to be filled and length to be set
+ // note: user must call twi_transmit(bytes, length) to do this
+ twi_onSlaveTransmit();
+ // if they didn't change buffer & length, initialize it
+ if(0 == twi_txBufferLength){
+ twi_txBufferLength = 1;
+ twi_txBuffer[0] = 0x00;
+ }
+ // transmit first byte from buffer, fall
+ case TW_ST_DATA_ACK: // byte sent, ack returned
+ // copy data to output register
+ TWDR = twi_txBuffer[twi_txBufferIndex++];
+ // if there is more to send, ack, otherwise nack
+ if(twi_txBufferIndex < twi_txBufferLength){
+ twi_reply(1);
+ }else{
+ twi_reply(0);
+ }
+ break;
+ case TW_ST_DATA_NACK: // received nack, we are done
+ case TW_ST_LAST_DATA: // received ack, but we are done already!
+ // ack future responses
+ twi_reply(1);
+ // leave slave receiver state
+ twi_state = TWI_READY;
+ break;
+
+ // All
+ case TW_NO_INFO: // no state information
+ break;
+ case TW_BUS_ERROR: // bus error, illegal stop/start
+ twi_error = TW_BUS_ERROR;
+ twi_stop();
+ break;
+ }
+}
+
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/utility/twi.h b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/utility/twi.h
new file mode 100644
index 0000000000..6526593394
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/Wire/utility/twi.h
@@ -0,0 +1,53 @@
+/*
+ twi.h - TWI/I2C library for Wiring & Arduino
+ Copyright (c) 2006 Nicholas Zambetti. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef twi_h
+#define twi_h
+
+ #include <inttypes.h>
+
+ //#define ATMEGA8
+
+ #ifndef TWI_FREQ
+ #define TWI_FREQ 100000L
+ #endif
+
+ #ifndef TWI_BUFFER_LENGTH
+ #define TWI_BUFFER_LENGTH 32
+ #endif
+
+ #define TWI_READY 0
+ #define TWI_MRX 1
+ #define TWI_MTX 2
+ #define TWI_SRX 3
+ #define TWI_STX 4
+
+ void twi_init(void);
+ void twi_setAddress(uint8_t);
+ uint8_t twi_readFrom(uint8_t, uint8_t*, uint8_t, uint8_t);
+ uint8_t twi_writeTo(uint8_t, uint8_t*, uint8_t, uint8_t, uint8_t);
+ uint8_t twi_transmit(const uint8_t*, uint8_t);
+ void twi_attachSlaveRxEvent( void (*)(uint8_t*, int) );
+ void twi_attachSlaveTxEvent( void (*)(void) );
+ void twi_reply(uint8_t);
+ void twi_stop(void);
+ void twi_releaseBus(void);
+
+#endif
+
--
GitLab