diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h
index bb30b775bfe1beb56ba4cd7e87ed99cd7431550b..8fb8ad88f19659992e367dbff36858da10707904 100644
--- a/Marlin/src/lcd/language/language_zh_CN.h
+++ b/Marlin/src/lcd/language/language_zh_CN.h
@@ -32,22 +32,35 @@ namespace Language_zh_CN {
using namespace Language_en; // Inherit undefined strings from English
constexpr uint8_t CHARSIZE = 3;
- PROGMEM Language_Str LANGUAGE = _UxGT("Simplified Chinese");
+ PROGMEM Language_Str LANGUAGE = _UxGT("简体中文");
PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT("已就绪."); //" ready."
+ PROGMEM Language_Str MSG_MARLIN = _UxGT("Marlin");
+ PROGMEM Language_Str MSG_YES = _UxGT("是");
+ PROGMEM Language_Str MSG_NO = _UxGT("否");
PROGMEM Language_Str MSG_BACK = _UxGT("返回"); // ”Back“
+ PROGMEM Language_Str MSG_MEDIA_ABORTING = _UxGT("放弃中...");
PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("存储卡已插入"); //"Card inserted"
PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("存储卡被拔出"); //"Card removed"
+ PROGMEM Language_Str MSG_MEDIA_WAITING = _UxGT("等待存储器");
+ PROGMEM Language_Str MSG_MEDIA_READ_ERROR = _UxGT("存储器读取错误");
+ PROGMEM Language_Str MSG_MEDIA_USB_REMOVED = _UxGT("USB设备已弹出");
+ PROGMEM Language_Str MSG_MEDIA_USB_FAILED = _UxGT("USB启动错误");
+ PROGMEM Language_Str MSG_KILL_SUBCALL_OVERFLOW = _UxGT("子响应溢出");
PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("挡块"); //"Endstops" // Max length 8 characters
+ PROGMEM Language_Str MSG_LCD_SOFT_ENDSTOPS = _UxGT("软挡块");
PROGMEM Language_Str MSG_MAIN = _UxGT("主菜单"); //"Main"
+ PROGMEM Language_Str MSG_ADVANCED_SETTINGS = _UxGT("高级设置");
+ PROGMEM Language_Str MSG_CONFIGURATION = _UxGT("配置");
PROGMEM Language_Str MSG_AUTOSTART = _UxGT("自动开始"); //"Autostart"
PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("关闭步进电机"); //"Disable steppers"
PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("调试菜单"); // "Debug Menu"
PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("进度条测试"); // "Progress Bar Test"
- PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("回原点"); //"Auto home"
+ PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("自动回原点"); //"Auto home"
PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("回X原位"); //"Home X"
PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("回Y原位"); //"Home Y"
PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("回Z原位"); //"Home Z"
+ PROGMEM Language_Str MSG_AUTO_Z_ALIGN = _UxGT("自动Z对齐");
PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("平台调平XYZ归原位"); //"Homing XYZ"
PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("单击开始热床调平"); //"Click to Begin"
PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("下个热床调平点"); //"Next Point"
@@ -70,7 +83,18 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_PREHEAT_2_ALL = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 全部"); //MSG_PREHEAT_2 " All"
PROGMEM Language_Str MSG_PREHEAT_2_BEDONLY = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 热床"); //MSG_PREHEAT_2 " Bed"
PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS = _UxGT("预热 ") PREHEAT_2_LABEL _UxGT(" 设置"); //MSG_PREHEAT_2 " conf"
+ PROGMEM Language_Str MSG_PREHEAT_CUSTOM = _UxGT("预热自定义");
PROGMEM Language_Str MSG_COOLDOWN = _UxGT("降温"); //"Cooldown"
+ PROGMEM Language_Str MSG_CUTTER_FREQUENCY = _UxGT("切割频率");
+ PROGMEM Language_Str MSG_LASER_MENU = _UxGT("激光控制");
+ PROGMEM Language_Str MSG_LASER_OFF = _UxGT("激光关");
+ PROGMEM Language_Str MSG_LASER_ON = _UxGT("激光开");
+ PROGMEM Language_Str MSG_LASER_POWER = _UxGT("激光电源");
+ PROGMEM Language_Str MSG_SPINDLE_MENU = _UxGT("主轴控制");
+ PROGMEM Language_Str MSG_SPINDLE_OFF = _UxGT("主轴关");
+ PROGMEM Language_Str MSG_SPINDLE_ON = _UxGT("主轴开");
+ PROGMEM Language_Str MSG_SPINDLE_POWER = _UxGT("主轴电源");
+ PROGMEM Language_Str MSG_SPINDLE_REVERSE = _UxGT("主轴反转");
PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("电源打开"); //"Switch power on"
PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("电源关闭"); //"Switch power off"
PROGMEM Language_Str MSG_EXTRUDE = _UxGT("挤出"); //"Extrude"
@@ -79,15 +103,31 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("调平热床"); //"Bed leveling"
PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("调平热床"); //"Level bed"
PROGMEM Language_Str MSG_LEVEL_CORNERS = _UxGT("调平边角"); // "Level corners"
-
PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("下个边角"); // "Next corner"
+ PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT("网格编辑器");
PROGMEM Language_Str MSG_EDIT_MESH = _UxGT("编辑网格"); // "Edit Mesh"
PROGMEM Language_Str MSG_EDITING_STOPPED = _UxGT("网格编辑已停止"); // "Mesh Editing Stopped"
+ PROGMEM Language_Str MSG_PROBING_MESH = _UxGT("探测点");
+ PROGMEM Language_Str MSG_MESH_X = _UxGT("索引X");
+ PROGMEM Language_Str MSG_MESH_Y = _UxGT("索引Y");
+ PROGMEM Language_Str MSG_MESH_EDIT_Z = _UxGT("Z 值");
PROGMEM Language_Str MSG_USER_MENU = _UxGT("定制命令"); // "Custom Commands"
-
+ PROGMEM Language_Str MSG_M48_TEST = _UxGT("M48探测");
+ PROGMEM Language_Str MSG_M48_POINT = _UxGT("M48点");
+ PROGMEM Language_Str MSG_M48_DEVIATION = _UxGT("M48偏差");
+ PROGMEM Language_Str MSG_IDEX_MENU = _UxGT("IDEX模式");
+ PROGMEM Language_Str MSG_OFFSETS_MENU = _UxGT("工具偏移量");
+ PROGMEM Language_Str MSG_IDEX_MODE_AUTOPARK = _UxGT("自动停靠");
+ PROGMEM Language_Str MSG_IDEX_MODE_DUPLICATE = _UxGT("复制");
+ PROGMEM Language_Str MSG_IDEX_MODE_MIRRORED_COPY = _UxGT("镜像复制");
+ PROGMEM Language_Str MSG_IDEX_MODE_FULL_CTRL = _UxGT("完全控制");
+ PROGMEM Language_Str MSG_HOTEND_OFFSET_X = _UxGT("第二喷头是X");
+ PROGMEM Language_Str MSG_HOTEND_OFFSET_Y = _UxGT("第二喷头是Y");
+ PROGMEM Language_Str MSG_HOTEND_OFFSET_Z = _UxGT("第二喷头是Z");
PROGMEM Language_Str MSG_UBL_DOING_G29 = _UxGT("执行G29"); // "Doing G29"
PROGMEM Language_Str MSG_UBL_TOOLS = _UxGT("UBL工具"); // "UBL Tools"
PROGMEM Language_Str MSG_UBL_LEVEL_BED = _UxGT("统一热床调平(UBL)"); // "Unified Bed Leveling"
+ PROGMEM Language_Str MSG_LCD_TILTING_MESH = _UxGT("倾斜點");
PROGMEM Language_Str MSG_UBL_MANUAL_MESH = _UxGT("手工创设网格"); // "Manually Build Mesh"
PROGMEM Language_Str MSG_UBL_BC_INSERT = _UxGT("放置垫片并测量"); // "Place shim & measure"
PROGMEM Language_Str MSG_UBL_BC_INSERT2 = _UxGT("测量"); // "Measure"
@@ -95,8 +135,10 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_UBL_MOVING_TO_NEXT = _UxGT("移动到下一个"); // "Moving to next"
PROGMEM Language_Str MSG_UBL_ACTIVATE_MESH = _UxGT("激活UBL"); // "Activate UBL"
PROGMEM Language_Str MSG_UBL_DEACTIVATE_MESH = _UxGT("关闭UBL"); // "Deactivate UBL"
- PROGMEM Language_Str MSG_UBL_SET_TEMP_BED = _UxGT("设置热床温度"); // "Bed Temp"
+ PROGMEM Language_Str MSG_UBL_SET_TEMP_BED = _UxGT("热床温度"); // "Bed Temp"
+ PROGMEM Language_Str MSG_UBL_BED_TEMP_CUSTOM = _UxGT("热床温度");
PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND = _UxGT("热端温度"); // "Hotend Temp"
+ PROGMEM Language_Str MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("热端温度");
PROGMEM Language_Str MSG_UBL_MESH_EDIT = _UxGT("网格编辑"); // "Mesh Edit"
PROGMEM Language_Str MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("编辑客户网格"); // "Edit Custom Mesh"
PROGMEM Language_Str MSG_UBL_FINE_TUNE_MESH = _UxGT("细调网格"); // "Fine Tuning Mesh"
@@ -112,6 +154,13 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M1 = _UxGT("批准 ") PREHEAT_1_LABEL _UxGT(" 网格"); // "Validate PREHEAT_1_LABEL Mesh"
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M2 = _UxGT("批准 ") PREHEAT_2_LABEL _UxGT(" 网格"); // "Validate PREHEAT_2_LABEL Mesh"
PROGMEM Language_Str MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("批准客户网格"); // "Validate Custom Mesh"
+ PROGMEM Language_Str MSG_G26_HEATING_BED = _UxGT("G26加热热床");
+ PROGMEM Language_Str MSG_G26_HEATING_NOZZLE = _UxGT("G26加热喷嘴");
+ PROGMEM Language_Str MSG_G26_MANUAL_PRIME = _UxGT("手动填装中...");
+ PROGMEM Language_Str MSG_G26_FIXED_LENGTH = _UxGT("固定距离填装");
+ PROGMEM Language_Str MSG_G26_PRIME_DONE = _UxGT("填装完成");
+ PROGMEM Language_Str MSG_G26_CANCELED = _UxGT("G26已取消");
+ PROGMEM Language_Str MSG_G26_LEAVING = _UxGT("离开G26");
PROGMEM Language_Str MSG_UBL_CONTINUE_MESH = _UxGT("继续热床网格"); // "Continue Bed Mesh"
PROGMEM Language_Str MSG_UBL_MESH_LEVELING = _UxGT("网格调平"); // "Mesh Leveling"
PROGMEM Language_Str MSG_UBL_3POINT_MESH_LEVELING = _UxGT("三点调平"); // "3-Point Leveling"
@@ -141,6 +190,7 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_UBL_NO_STORAGE = _UxGT("没有存储"); // "No storage"
PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT("错误: UBL保存"); // "Err: UBL Save"
PROGMEM Language_Str MSG_UBL_RESTORE_ERROR = _UxGT("错误: UBL还原"); // "Err: UBL Restore"
+ PROGMEM Language_Str MSG_UBL_Z_OFFSET = _UxGT("Z偏移量: ");
PROGMEM Language_Str MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z偏移已停止"); // "Z-Offset Stopped"
PROGMEM Language_Str MSG_UBL_STEP_BY_STEP_MENU = _UxGT("一步步UBL"); // "Step-By-Step UBL"
PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1. 创设冷网格");
@@ -177,6 +227,7 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_MOVE_Z = _UxGT("移动Z"); //"Move Z"
PROGMEM Language_Str MSG_MOVE_E = _UxGT("挤出机"); //"Extruder"
PROGMEM Language_Str MSG_MOVE_EN = _UxGT("挤出机 *"); //"Extruder"
+ PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT("热端太冷");
PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT("移动 %s mm"); //"Move 0.025mm"
PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("移动 0.1 mm"); //"Move 0.1mm"
PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("移动 1 mm"); //"Move 1mm"
@@ -185,11 +236,20 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_BED_Z = _UxGT("热床Z"); //"Bed Z"
PROGMEM Language_Str MSG_NOZZLE = " " LCD_STR_THERMOMETER _UxGT(" 喷嘴"); //"Nozzle" 噴嘴
PROGMEM Language_Str MSG_NOZZLE_N = " " LCD_STR_THERMOMETER _UxGT(" 喷嘴 ~"); //"Nozzle" 噴嘴
+ PROGMEM Language_Str MSG_NOZZLE_PARKED = _UxGT("喷嘴已停靠");
+ PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("喷嘴待命中");
PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" 热床"); //"Bed"
+ PROGMEM Language_Str MSG_CHAMBER = _UxGT("机箱壳");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("风扇速率"); //"Fan speed"
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("风扇速率 ~"); //"Fan speed"
+ PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("存储的风扇 ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("额外风扇速率"); // "Extra fan speed"
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("额外风扇速率 ~"); // "Extra fan speed"
+ PROGMEM Language_Str MSG_CONTROLLER_FAN = _UxGT("控制器风扇");
+ PROGMEM Language_Str MSG_CONTROLLER_FAN_IDLE_SPEED = _UxGT("空闲速度");
+ PROGMEM Language_Str MSG_CONTROLLER_FAN_AUTO_ON = _UxGT("自动模式");
+ PROGMEM Language_Str MSG_CONTROLLER_FAN_SPEED = _UxGT("工作速度");
+ PROGMEM Language_Str MSG_CONTROLLER_FAN_DURATION = _UxGT("空闲周期");
PROGMEM Language_Str MSG_FLOW = _UxGT("挤出速率"); //"Flow"
PROGMEM Language_Str MSG_FLOW_N = _UxGT("挤出速率 ~"); //"Flow"
PROGMEM Language_Str MSG_CONTROL = _UxGT("控制"); //"Control"
@@ -199,6 +259,22 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("自动控温"); //"Autotemp"
PROGMEM Language_Str MSG_LCD_ON = _UxGT("开"); //"On"
PROGMEM Language_Str MSG_LCD_OFF = _UxGT("关"); //"Off"
+ PROGMEM Language_Str MSG_PID_AUTOTUNE = _UxGT("自动PID");
+ PROGMEM Language_Str MSG_PID_AUTOTUNE_E = _UxGT("自动PID *");
+ PROGMEM Language_Str MSG_PID_AUTOTUNE_DONE = _UxGT("PID调整完成");
+ PROGMEM Language_Str MSG_PID_BAD_EXTRUDER_NUM = _UxGT("自动调失败. 坏的挤出机");
+ PROGMEM Language_Str MSG_PID_TEMP_TOO_HIGH = _UxGT("自动调失败. 温度太高");
+ PROGMEM Language_Str MSG_PID_TIMEOUT = _UxGT("自动调失败! 超时");
+ PROGMEM Language_Str MSG_PID_P = _UxGT("PID-P");
+ PROGMEM Language_Str MSG_PID_P_E = _UxGT("PID-P *");
+ PROGMEM Language_Str MSG_PID_I = _UxGT("PID-I");
+ PROGMEM Language_Str MSG_PID_I_E = _UxGT("PID-I *");
+ PROGMEM Language_Str MSG_PID_D = _UxGT("PID-D");
+ PROGMEM Language_Str MSG_PID_D_E = _UxGT("PID-D *");
+ PROGMEM Language_Str MSG_PID_C = _UxGT("PID-C");
+ PROGMEM Language_Str MSG_PID_C_E = _UxGT("PID-C *");
+ PROGMEM Language_Str MSG_PID_F = _UxGT("PID-F");
+ PROGMEM Language_Str MSG_PID_F_E = _UxGT("PID-F *");
PROGMEM Language_Str MSG_SELECT = _UxGT("选择"); //"Select"
PROGMEM Language_Str MSG_SELECT_E = _UxGT("选择 *");
PROGMEM Language_Str MSG_ACC = _UxGT("加速度"); //"Accel" acceleration
@@ -207,6 +283,7 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_VB_JERK = _UxGT("轴抖动速率") LCD_STR_B; //"Vb-jerk"
PROGMEM Language_Str MSG_VC_JERK = _UxGT("轴抖动速率") LCD_STR_C; //"Vc-jerk"
PROGMEM Language_Str MSG_VE_JERK = _UxGT("挤出机抖动速率"); //"Ve-jerk"
+ PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("接点差");
PROGMEM Language_Str MSG_VELOCITY = _UxGT("速度"); // "Velocity"
PROGMEM Language_Str MSG_VMAX_A = _UxGT("最大进料速率") LCD_STR_A; //"Vmax " max_feedrate_mm_s
PROGMEM Language_Str MSG_VMAX_B = _UxGT("最大进料速率") LCD_STR_B; //"Vmax " max_feedrate_mm_s
@@ -223,6 +300,8 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_AMAX_EN = _UxGT("最大打印加速度 *"); //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
PROGMEM Language_Str MSG_A_RETRACT = _UxGT("收进加速度"); //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts
PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("非打印移动加速度"); //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
+ PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("频率最大");
+ PROGMEM Language_Str MSG_XY_FREQUENCY_FEEDRATE = _UxGT("进给速度");
PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("轴步数/mm"); //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92
PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("轴步数/mm"); //"Asteps/mm"
PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("轴步数/mm"); //"Bsteps/mm"
@@ -237,24 +316,50 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("丝料直径 *");
PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("卸载 mm"); // "Unload mm"
PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("装载 mm"); // "Load mm"
+ PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Advance K");
+ PROGMEM Language_Str MSG_ADVANCE_K_E = _UxGT("Advance K *");
PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD对比度"); //"LCD contrast"
PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("保存设置"); //"Store memory"
PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("装载设置"); //"Load memory"
PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT("恢复安全值"); //"Restore Defaults"
PROGMEM Language_Str MSG_INIT_EEPROM = _UxGT("初始化设置"); // "Initialize EEPROM"
- PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("刷新"); //"Refresh"
+ PROGMEM Language_Str MSG_ERR_EEPROM_CRC = _UxGT("EEPROM CRC 错误");
+ PROGMEM Language_Str MSG_ERR_EEPROM_INDEX = _UxGT("EEPROM Index 错误");
+ PROGMEM Language_Str MSG_ERR_EEPROM_VERSION = _UxGT("EEPROM Version 错误");
+ PROGMEM Language_Str MSG_SETTINGS_STORED = _UxGT("设置已保存");
+ PROGMEM Language_Str MSG_MEDIA_UPDATE = _UxGT("存储器更新");
+ PROGMEM Language_Str MSG_RESET_PRINTER = _UxGT("复位打印机");
+ PROGMEM Language_Str MSG_REFRESH = _UxGT("刷新"); //"Refresh"
PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT("信息屏"); //"Info screen"
PROGMEM Language_Str MSG_PREPARE = _UxGT("准备"); //"Prepare"
PROGMEM Language_Str MSG_TUNE = _UxGT("调整"); //"Tune"
+ PROGMEM Language_Str MSG_START_PRINT = _UxGT("开始打印");
+ PROGMEM Language_Str MSG_BUTTON_NEXT = _UxGT("下一个");
+ PROGMEM Language_Str MSG_BUTTON_INIT = _UxGT("初始");
+ PROGMEM Language_Str MSG_BUTTON_STOP = _UxGT("停止");
+ PROGMEM Language_Str MSG_BUTTON_PRINT = _UxGT("打印");
+ PROGMEM Language_Str MSG_BUTTON_RESET = _UxGT("复位");
+ PROGMEM Language_Str MSG_BUTTON_IGNORE = _UxGT("忽略");
+ PROGMEM Language_Str MSG_BUTTON_CANCEL = _UxGT("取消");
+ PROGMEM Language_Str MSG_BUTTON_DONE = _UxGT("完成");
+ PROGMEM Language_Str MSG_BUTTON_BACK = _UxGT("返回");
+ PROGMEM Language_Str MSG_BUTTON_PROCEED = _UxGT("继续");
+ PROGMEM Language_Str MSG_PAUSING = _UxGT("暂停中...");
PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("暂停打印"); //"Pause print"
PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("恢复打印"); //"Resume print"
PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("停止打印"); //"Stop print"
+ PROGMEM Language_Str MSG_PRINTING_OBJECT = _UxGT("打印物体");
+ PROGMEM Language_Str MSG_CANCEL_OBJECT = _UxGT("取消物体");
+ PROGMEM Language_Str MSG_CANCEL_OBJECT_N = _UxGT("取消物体 =");
+ PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT("中断恢复");
PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("从存储卡上打印"); //"Print from SD"
PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("无存储卡"); //"No SD card"
PROGMEM Language_Str MSG_DWELL = _UxGT("休眠中 ..."); //"Sleep..."
PROGMEM Language_Str MSG_USERWAIT = _UxGT("点击继续 ..."); //"Click to resume..."
PROGMEM Language_Str MSG_PRINT_PAUSED = _UxGT("暫停打印"); // "Print paused"
+ PROGMEM Language_Str MSG_PRINTING = _UxGT("打印中...");
PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("已取消打印"); //"Print aborted"
+ PROGMEM Language_Str MSG_PRINT_DONE = _UxGT("打印已完成");
PROGMEM Language_Str MSG_NO_MOVE = _UxGT("无移动"); //"No move."
PROGMEM Language_Str MSG_KILLED = _UxGT("已杀掉"); //"KILLED. "
PROGMEM Language_Str MSG_STOPPED = _UxGT("已停止"); //"STOPPED. "
@@ -267,6 +372,23 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("回抽恢复后进料速率mm/s"); //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s)
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V"); // "S UnRet V"
PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("自动抽回"); //"AutoRetr." autoretract_enabled,
+ PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH = _UxGT("交换长度");
+ PROGMEM Language_Str MSG_FILAMENT_SWAP_EXTRA = _UxGT("额外的交换");
+ PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH = _UxGT("清洗长度");
+ PROGMEM Language_Str MSG_TOOL_CHANGE = _UxGT("换工具");
+ PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT = _UxGT("Z抬起");
+ PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("进给速度");
+ PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("回抽速度");
+ PROGMEM Language_Str MSG_FILAMENT_PARK_ENABLED = _UxGT("停靠头");
+ PROGMEM Language_Str MSG_SINGLENOZZLE_UNRETRACT_SPEED = _UxGT("恢复速度");
+ PROGMEM Language_Str MSG_SINGLENOZZLE_FAN_SPEED = _UxGT("风扇速度");
+ PROGMEM Language_Str MSG_SINGLENOZZLE_FAN_TIME = _UxGT("风扇时间");
+ PROGMEM Language_Str MSG_TOOL_MIGRATION_ON = _UxGT("自动开");
+ PROGMEM Language_Str MSG_TOOL_MIGRATION_OFF = _UxGT("自动关");
+ PROGMEM Language_Str MSG_TOOL_MIGRATION = _UxGT("Tool Migration");
+ PROGMEM Language_Str MSG_TOOL_MIGRATION_AUTO = _UxGT("Auto-migration");
+ PROGMEM Language_Str MSG_TOOL_MIGRATION_END = _UxGT("Last Extruder");
+ PROGMEM Language_Str MSG_TOOL_MIGRATION_SWAP = _UxGT("Migrate to *");
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("更换丝料"); //"Change filament"
PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("更换丝料 *"); //"Change filament"
PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("装载丝料"); // "Load filament"
@@ -276,26 +398,52 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT("卸载全部"); // "Unload All"
PROGMEM Language_Str MSG_ATTACH_MEDIA = _UxGT("初始化存储卡"); //"Init. SD card"
PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("更换存储卡"); //"Change SD card"
+ PROGMEM Language_Str MSG_RELEASE_MEDIA = _UxGT("释放存储卡");
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z探针在热床之外"); //"Z probe out. bed" Z probe is not within the physical limits
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("偏斜因数"); // "Skew Factor"
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); // "BLTouch"
- PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch 自检"); // "BLTouch Self-Test"
- PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("重置BLTouch"); // "Reset BLTouch"
- PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("部署BLTouch"); // "Deploy BLTouch"
- PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("装载BLTouch"); // "Stow BLTouch"
+ PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("Cmd: 自检");
+ PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Cmd: 重置");
+ PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: 装载");
+ PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: 部署");
+ PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW模式");
+ PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V模式");
+ PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD模式");
+ PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: 模式保存");
+ PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("设置BLTouch为5V");
+ PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("设置BLTouch为OD");
+ PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("报告Drain");
+ PROGMEM Language_Str MSG_BLTOUCH_MODE_CHANGE = _UxGT("危险: 错误的设置将引起损坏! 是否继续?");
+ PROGMEM Language_Str MSG_TOUCHMI_PROBE = _UxGT("TouchMI");
+ PROGMEM Language_Str MSG_TOUCHMI_INIT = _UxGT("初始化TouchMI");
+ PROGMEM Language_Str MSG_TOUCHMI_ZTEST = _UxGT("Z偏移量测试");
+ PROGMEM Language_Str MSG_TOUCHMI_SAVE = _UxGT("保存");
+ PROGMEM Language_Str MSG_MANUAL_DEPLOY_TOUCHMI = _UxGT("部署TouchMI");
+ PROGMEM Language_Str MSG_MANUAL_DEPLOY = _UxGT("部署Z探针");
+ PROGMEM Language_Str MSG_MANUAL_STOW = _UxGT("收好Z探针");
PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("归位 %s%s%s 先"); //"Home ... first"
- PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("Z偏移"); //"Z Offset"
+ PROGMEM Language_Str MSG_ZPROBE_OFFSETS = _UxGT("探针偏移量");
+ PROGMEM Language_Str MSG_ZPROBE_XOFFSET = _UxGT("探针X偏移量");
+ PROGMEM Language_Str MSG_ZPROBE_YOFFSET = _UxGT("探针Y偏移量");
+ PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("探针Y偏移量"); //"Z Offset"
PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("微量调整X轴"); //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts
PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("微量调整Y轴"); //"Babystep Y"
PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("微量调整Z轴"); //"Babystep Z"
+ PROGMEM Language_Str MSG_BABYSTEP_TOTAL = _UxGT("总计");
PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("挡块终止"); //"Endstop abort"
PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("加热失败"); //"Heating failed"
- PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("错误：REDUNDANT TEMP"); //"Err: REDUNDANT TEMP"
+ PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED = _UxGT("热床加热失败");
+ PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER = _UxGT("机箱加热失败");
+ PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("错误：冗余温度"); //"Err: REDUNDANT TEMP"
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("温控失控"); //"THERMAL RUNAWAY"
+ PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED = _UxGT("热床热量失控");
+ PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("机箱热量失控");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("错误：最高温度"); //"Err: MAXTEMP"
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("错误：最低温度"); //"Err: MINTEMP"
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("错误：最高热床温度"); //"Err: MAXTEMP BED"
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("错误：最低热床温度"); //"Err: MINTEMP BED"
+ PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("错误：最高机箱温度");
+ PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("错误：最低机箱温度");
PROGMEM Language_Str MSG_ERR_Z_HOMING = _UxGT("归位 XY 先"); // "Home XY First"
PROGMEM Language_Str MSG_HALTED = _UxGT("打印停机"); //"PRINTER HALTED"
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("请重置"); //"Please reset"
@@ -303,7 +451,11 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("时"); //"h" // One character only
PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("分"); //"m" // One character only
PROGMEM Language_Str MSG_HEATING = _UxGT("加热中 ..."); //"Heating..."
+ PROGMEM Language_Str MSG_COOLING = _UxGT("冷却中 ...");
PROGMEM Language_Str MSG_BED_HEATING = _UxGT("加热热床中 ..."); //"Bed Heating..."
+ PROGMEM Language_Str MSG_BED_COOLING = _UxGT("热床冷却中 ...");
+ PROGMEM Language_Str MSG_CHAMBER_HEATING = _UxGT("机箱加热中 ...");
+ PROGMEM Language_Str MSG_CHAMBER_COOLING = _UxGT("机箱冷却中 ...");
PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("⊿校准"); //"Delta Calibration"
PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("⊿校准X"); //"Calibrate X"
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("⊿校准Y"); //"Calibrate Y"
@@ -312,6 +464,7 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_DELTA_SETTINGS = _UxGT("⊿设置"); // "Delta Settings"
PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT("⊿自动校准"); // "Auto Calibration"
PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("设置⊿高度"); // "Set Delta Height"
+ PROGMEM Language_Str MSG_DELTA_Z_OFFSET_CALIBRATE = _UxGT("探针Z偏移量");
PROGMEM Language_Str MSG_DELTA_DIAG_ROD = _UxGT("⊿斜柱"); // "Diag Rod"
PROGMEM Language_Str MSG_DELTA_HEIGHT = _UxGT("⊿高度"); // "Height"
PROGMEM Language_Str MSG_DELTA_RADIUS = _UxGT("⊿半径"); // "Radius"
@@ -328,6 +481,10 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT("挤出机"); //"Extruders"
PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("波特率"); //"Baud"
PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("协议"); //"Protocol"
+ PROGMEM Language_Str MSG_INFO_RUNAWAY_OFF = _UxGT("监控温度失控:关");
+ PROGMEM Language_Str MSG_INFO_RUNAWAY_ON = _UxGT("监控温度失控:开");
+ PROGMEM Language_Str MSG_HOTEND_IDLE_TIMEOUT = _UxGT("热端空闲超时");
+
PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("外壳灯"); // "Case light"
PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("灯亮度"); // "Light BRIGHTNESS"
@@ -355,7 +512,9 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y 驱动 %"); // "Y Driver %"
PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z 驱动 %"); // "Z Driver %"
PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E 驱动 %"); // "E Driver %"
+ PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC 连接错误");
PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("保存驱动设置"); // "DAC EEPROM Write"
+ PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER = _UxGT("更换料");
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("打印已暂停"); // "PRINT PAUSED"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("装载丝料"); // "LOAD FILAMENT"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("卸载丝料"); // "UNLOAD FILAMENT"
@@ -363,26 +522,116 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("清除更多"); // "Purge more"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("恢复打印"); //"Resume print"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" 喷嘴: "); // " Nozzle: "
+ PROGMEM Language_Str MSG_RUNOUT_SENSOR = _UxGT("断料传感器");
+ PROGMEM Language_Str MSG_RUNOUT_DISTANCE_MM = _UxGT("断料距离mm");
PROGMEM Language_Str MSG_KILL_HOMING_FAILED = _UxGT("归原位失败"); // "Homing failed"
PROGMEM Language_Str MSG_LCD_PROBING_FAILED = _UxGT("探针探测失败"); // "Probing failed"
PROGMEM Language_Str MSG_M600_TOO_COLD = _UxGT("M600: 太凉"); // "M600: Too cold"
+ PROGMEM Language_Str MSG_MMU2_CHOOSE_FILAMENT_HEADER = _UxGT("选择料");
+ PROGMEM Language_Str MSG_MMU2_MENU = _UxGT("MMU");
+ PROGMEM Language_Str MSG_KILL_MMU2_FIRMWARE = _UxGT("升级MMU固件!");
+ PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING = _UxGT("MMU需要专注.");
+ PROGMEM Language_Str MSG_MMU2_RESUME = _UxGT("MMU恢复");
+ PROGMEM Language_Str MSG_MMU2_RESUMING = _UxGT("MMU恢复中...");
+ PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT = _UxGT("MMU加载");
+ PROGMEM Language_Str MSG_MMU2_LOAD_ALL = _UxGT("MMU加载全部");
+ PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE = _UxGT("MMU加载到喷嘴");
+ PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT = _UxGT("MMU弹出");
+ PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N = _UxGT("MMU弹出 ~");
+ PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT = _UxGT("MMU卸载");
+ PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT = _UxGT("加载填充. %i...");
+ PROGMEM Language_Str MSG_MMU2_EJECTING_FILAMENT = _UxGT("弹出填充. ...");
+ PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT = _UxGT("卸载填充....");
+ PROGMEM Language_Str MSG_MMU2_ALL = _UxGT("全部");
+ PROGMEM Language_Str MSG_MMU2_FILAMENT_N = _UxGT("料 ~");
+ PROGMEM Language_Str MSG_MMU2_RESET = _UxGT("复位MMU");
+ PROGMEM Language_Str MSG_MMU2_RESETTING = _UxGT("MMU复位中...");
+ PROGMEM Language_Str MSG_MMU2_EJECT_RECOVER = _UxGT("移出, 按下");
+
+ PROGMEM Language_Str MSG_MIX = _UxGT("混合");
+ PROGMEM Language_Str MSG_MIX_COMPONENT_N = _UxGT("器件 =");
+ PROGMEM Language_Str MSG_MIXER = _UxGT("混合器");
+ PROGMEM Language_Str MSG_GRADIENT = _UxGT("梯度");
+ PROGMEM Language_Str MSG_FULL_GRADIENT = _UxGT("全梯度");
+ PROGMEM Language_Str MSG_TOGGLE_MIX = _UxGT("开关混合");
+ PROGMEM Language_Str MSG_CYCLE_MIX = _UxGT("循环混合");
+ PROGMEM Language_Str MSG_GRADIENT_MIX = _UxGT("梯度混合");
+ PROGMEM Language_Str MSG_REVERSE_GRADIENT = _UxGT("反向梯度");
+ PROGMEM Language_Str MSG_ACTIVE_VTOOL = _UxGT("激活 V-tool");
+ PROGMEM Language_Str MSG_START_VTOOL = _UxGT("开始 V-tool");
+ PROGMEM Language_Str MSG_END_VTOOL = _UxGT(" 结束 V-tool");
+ PROGMEM Language_Str MSG_GRADIENT_ALIAS = _UxGT("别名 V-tool");
+ PROGMEM Language_Str MSG_RESET_VTOOLS = _UxGT("复位 V-tools");
+ PROGMEM Language_Str MSG_COMMIT_VTOOL = _UxGT("提交 V-tool Mix");
+ PROGMEM Language_Str MSG_VTOOLS_RESET = _UxGT("V-tools 已复位");
+ PROGMEM Language_Str MSG_START_Z = _UxGT("开始 Z:");
+ PROGMEM Language_Str MSG_END_Z = _UxGT(" 结束 Z:");
+
+ PROGMEM Language_Str MSG_GAMES = _UxGT("游戏");
+ PROGMEM Language_Str MSG_BRICKOUT = _UxGT("敲方块");
+ PROGMEM Language_Str MSG_INVADERS = _UxGT("入侵者");
+ PROGMEM Language_Str MSG_SNAKE = _UxGT("贪吃蛇");
+ PROGMEM Language_Str MSG_MAZE = _UxGT("迷宫");
+
+ PROGMEM Language_Str MSG_BAD_PAGE = _UxGT("错误页面索引");
+ PROGMEM Language_Str MSG_BAD_PAGE_SPEED = _UxGT("错误页面速度");
+
+ //
+ // Filament Change screens show up to 3 lines on a 4-line display
+ // ...or up to 2 lines on a 3-line display
+ //
#if LCD_HEIGHT >= 4
+ PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_2_LINE("按下按钮", "恢复打印"));
+ PROGMEM Language_Str MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停靠中..."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("等待开始", "丝料", "变更")); // "Wait for start of the filament change"
- PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("等待", "卸下丝料")); // "Wait for filament unload"
- PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("插入丝料", "并按键", "来继续 ...")); // "Insert filament and press button to continue..."
+ PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("插入料", "并按下", "以继续"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("按下按钮来", "加热喷嘴.")); // "Press button to heat nozzle."
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("加热喷嘴", "请等待 ...")); // "Heating nozzle Please wait..."
+ PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("等待", "卸下丝料")); // "Wait for filament unload"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("等待", "进料")); // "Wait for filament load"
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("等待", "丝料清除")); // "Wait for filament purge"
+ PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_2_LINE("按下已完成", "料的清洗"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("等待打印", "恢复")); // "Wait for print to resume"
#else
+ PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("按下继续"));
+ PROGMEM Language_Str MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停靠中..."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("请等待 ...")); //"Please wait..."
- PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); //"Ejecting..."
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("插入并单击")); //"Insert and Click"
+ PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("按下加热"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("加热中 ...")); // "Heating..."
+ PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); //"Ejecting..."
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("装载中 ...")); //"Loading..."
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("清除中 ...")); // "Purging..."
+ PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("按下完成"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("恢复中 ...")); //"Resuming..."
#endif
+ PROGMEM Language_Str MSG_TMC_DRIVERS = _UxGT("TMC驱动器");
+ PROGMEM Language_Str MSG_TMC_CURRENT = _UxGT("驱动电流");
+ PROGMEM Language_Str MSG_TMC_HYBRID_THRS = _UxGT("混合阈值");
+ PROGMEM Language_Str MSG_TMC_HOMING_THRS = _UxGT("无感回零");
+ PROGMEM Language_Str MSG_TMC_STEPPING_MODE = _UxGT("步进模式");
+ PROGMEM Language_Str MSG_TMC_STEALTH_ENABLED = _UxGT("StealthChop已使能");
+ PROGMEM Language_Str MSG_SERVICE_RESET = _UxGT("复位");
+ PROGMEM Language_Str MSG_SERVICE_IN = _UxGT(" 在:");
+ PROGMEM Language_Str MSG_BACKLASH = _UxGT("回差");
+ PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A;
+ PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B;
+ PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C;
+ PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("校正");
+ PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("平滑的");
+
+ PROGMEM Language_Str MSG_LEVEL_X_AXIS = _UxGT("X轴调平");
+ PROGMEM Language_Str MSG_AUTO_CALIBRATE = _UxGT("自动校准");
+ PROGMEM Language_Str MSG_HEATER_TIMEOUT = _UxGT("加热器超时");
+ PROGMEM Language_Str MSG_REHEAT = _UxGT("重新加热");
+ PROGMEM Language_Str MSG_REHEATING = _UxGT("重新加热中...");
}
+
+#if FAN_COUNT == 1
+ #define MSG_FIRST_FAN_SPEED MSG_FAN_SPEED
+ #define MSG_FIRST_EXTRA_FAN_SPEED MSG_EXTRA_FAN_SPEED
+#else
+ #define MSG_FIRST_FAN_SPEED MSG_FAN_SPEED_N
+ #define MSG_FIRST_EXTRA_FAN_SPEED MSG_EXTRA_FAN_SPEED_N
+#endif