diff --git a/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp
index ef0dc8b1a2b121f5ff7ff3372bcdf936e5c3ebf4..a5e811c02ade1a1eb846112b06b4151a09be75a5 100644
--- a/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp
+++ b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp
@@ -95,8 +95,7 @@ void spiBegin (void) {
SPSR = spiRate & 1 || spiRate == 6 ? 0 : _BV(SPI2X);
}
-
- //------------------------------------------------------------------------------
+ //------------------------------------------------------------------------------
/** SPI receive a byte */
uint8_t spiRec(void) {
SPDR = 0xFF;
@@ -157,7 +156,7 @@ void spiBegin (void) {
// is 2 ^^ (clock_div + 1). If nothing is slow enough, we'll use the
// slowest (128 == 2 ^^ 7, so clock_div = 6).
uint8_t clockDiv;
-
+
// When the clock is known at compiletime, use this if-then-else
// cascade, which the compiler knows how to completely optimize
// away. When clock is not known, use a loop instead, which generates
@@ -196,10 +195,10 @@ void spiBegin (void) {
SPCR = _BV(SPE) | _BV(MSTR) | ((bitOrder == SPI_LSBFIRST) ? _BV(DORD) : 0) |
(dataMode << CPHA) | ((clockDiv >> 1) << SPR0);
- SPSR = clockDiv | 0x01;
+ SPSR = clockDiv | 0x01;
}
-
+
//------------------------------------------------------------------------------
#else // SOFTWARE_SPI
//------------------------------------------------------------------------------
@@ -216,7 +215,7 @@ void spiBegin (void) {
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
// nothing to do
UNUSED(spiBeginTransaction);
- }
+ }
//------------------------------------------------------------------------------
/** Soft SPI receive byte */
@@ -280,7 +279,7 @@ void spiBegin (void) {
spiSend(token);
for (uint16_t i = 0; i < 512; i++)
spiSend(buf[i]);
- }
+ }
#endif // SOFTWARE_SPI
diff --git a/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp b/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp
index 2b9ec803877aa055fcf06b67463d0720e8a5579e..b35438f82b328405adc59b2deab0b865a44091c9 100644
--- a/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp
+++ b/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp
@@ -574,9 +574,9 @@
/** Begin SPI transaction, set clock, bit order, data mode */
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
// TODO: to be implemented
-
- }
-
+
+ }
+
#pragma GCC reset_options
#else
@@ -777,9 +777,8 @@
/** Begin SPI transaction, set clock, bit order, data mode */
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
// TODO: to be implemented
-
- }
-
+ }
+
#endif // ENABLED(SOFTWARE_SPI)
#endif // ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_st7920_sw_spi.cpp b/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_st7920_sw_spi.cpp
index 965b525bd8688813f27d5b40b401d9d24852c24c..192423d0002ec28730d27ab1af29d0fb03afbbcd 100644
--- a/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_st7920_sw_spi.cpp
+++ b/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_st7920_sw_spi.cpp
@@ -152,10 +152,10 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
u8g_SetPIOutput_DUE(u8g, U8G_PI_SCK);
u8g_SetPILevel_DUE(u8g, U8G_PI_MOSI, 0);
u8g_SetPIOutput_DUE(u8g, U8G_PI_MOSI);
-
+
SCK_pPio->PIO_CODR = SCK_dwMask; //SCK low - needed at power up but not after reset
MOSI_pPio->PIO_CODR = MOSI_dwMask; //MOSI low - needed at power up but not after reset
-
+
u8g_Delay(5);
u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */
diff --git a/Marlin/src/HAL/HAL_DUE/usb/compiler.h b/Marlin/src/HAL/HAL_DUE/usb/compiler.h
index fed704aace38f9f035d802f0c441dfad59731d20..fa705e218d20b91a4984e836d298d738a5734a2c 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/compiler.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/compiler.h
@@ -250,7 +250,7 @@
/* Define OPTIMIZE_HIGH attribute */
#if defined ( __CC_ARM ) /* Keil µVision 4 */
-# define OPTIMIZE_HIGH _Pragma("O3")
+# define OPTIMIZE_HIGH _Pragma("O3")
#elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */
# define OPTIMIZE_HIGH _Pragma("optimize=high")
#elif defined ( __GNUC__ ) /* GCC CS3 2009q3-68 */
@@ -889,7 +889,7 @@ typedef struct
#define LSB2W(u32) MSB1W(u32) //!< Least significant byte of 3rd rank of \a u32.
#define LSB1W(u32) MSB2W(u32) //!< Least significant byte of 2nd rank of \a u32.
#define LSB0W(u32) MSB3W(u32) //!< Least significant byte of 1st rank of \a u32.
-
+
#define MSW(u64) (((U32 *)&(u64))[1]) //!< Most significant word of \a u64.
#define LSW(u64) (((U32 *)&(u64))[0]) //!< Least significant word of \a u64.
#define MSH0(u64) (((U16 *)&(u64))[3]) //!< Most significant half-word of 1st rank of \a u64.
diff --git a/Marlin/src/HAL/HAL_DUE/usb/conf_access.h b/Marlin/src/HAL/HAL_DUE/usb/conf_access.h
index d9f7ddb40e48c6234bbe55bd86fd71098315bbde..553737ded55c160189065bed9733f4205d828b2d 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/conf_access.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/conf_access.h
@@ -59,14 +59,14 @@
#else
#define LUN_0 DISABLE
#endif
-#define LUN_1 DISABLE
-#define LUN_2 DISABLE
-#define LUN_3 DISABLE
+#define LUN_1 DISABLE
+#define LUN_2 DISABLE
+#define LUN_3 DISABLE
#define LUN_4 DISABLE
#define LUN_5 DISABLE
#define LUN_6 DISABLE
#define LUN_7 DISABLE
-#define LUN_USB DISABLE
+#define LUN_USB DISABLE
//! @}
/*! \name LUN 0 Definitions
@@ -93,10 +93,10 @@
* \warning Be careful not to waste time in order not to disturb the functions.
*/
//! @{
-#define memory_start_read_action(nb_sectors)
-#define memory_stop_read_action()
-#define memory_start_write_action(nb_sectors)
-#define memory_stop_write_action()
+#define memory_start_read_action(nb_sectors)
+#define memory_stop_read_action()
+#define memory_start_write_action(nb_sectors)
+#define memory_stop_write_action()
//! @}
/*! \name Activation of Interface Features
diff --git a/Marlin/src/HAL/HAL_DUE/usb/osc.h b/Marlin/src/HAL/HAL_DUE/usb/osc.h
index e6df4025970c20713b7af8e30daac6842c8bd709..fe09d6fd3eec5cb3987f33a750dcb9983c1fbfcd 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/osc.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/osc.h
@@ -246,7 +246,7 @@ static inline void osc_wait_ready(uint8_t id)
while (!osc_is_ready(id)) {
/* Do nothing */
}
-}
+}
//! @}
diff --git a/Marlin/src/HAL/HAL_DUE/usb/pll.h b/Marlin/src/HAL/HAL_DUE/usb/pll.h
index d9b946be260580f10bf6467b57d238329d073766..88545eedf65aec7f33b7bb5e87b8c08d5fd9f98c 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/pll.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/pll.h
@@ -273,8 +273,8 @@ static inline int pll_wait_for_lock(unsigned int pll_id)
}
return 0;
-}
-
+}
+
//! @}
/// @cond 0
diff --git a/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.h b/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.h
index ea177c9920286da9ad04ebab36f22420ced44bf7..6df82c146b755bf5ae98be91ac5898d2837a74b6 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.h
@@ -113,7 +113,7 @@ extern Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector);
*
* \return \c true if unload/load done success.
*/
-extern bool sd_mmc_spi_unload(bool unload);
+extern bool sd_mmc_spi_unload(bool unload);
//!
//! @brief This function returns the write protected status of the memory.
diff --git a/Marlin/src/HAL/HAL_DUE/usb/sysclk.c b/Marlin/src/HAL/HAL_DUE/usb/sysclk.c
index 1190895012ddd7d990f191d7acfaa19c4ebb94c8..2328a0853f46dae4143ad5c1505ac080c7eb282d 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/sysclk.c
+++ b/Marlin/src/HAL/HAL_DUE/usb/sysclk.c
@@ -45,7 +45,7 @@
*/
#ifdef ARDUINO_ARCH_SAM
-
+
#include "sysclk.h"
/// @cond 0
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udc.c b/Marlin/src/HAL/HAL_DUE/usb/udc.c
index 9f3c14aa2402f44da9ecb254a55a7330233919c5..6995d20b561f9fe7203fc76fb80656d6dc2ae8bc 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/udc.c
+++ b/Marlin/src/HAL/HAL_DUE/usb/udc.c
@@ -45,7 +45,7 @@
*/
#ifdef ARDUINO_ARCH_SAM
-
+
#include "conf_usb.h"
#include "usb_protocol.h"
#include "udd.h"
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udc.h b/Marlin/src/HAL/HAL_DUE/usb/udc.h
index edfe70788b075f89f1db3c17450ad33ca4916353..885bdf04d6514d2a9441fce1dc734baedd5489a5 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/udc.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/udc.h
@@ -143,7 +143,7 @@ extern "C" {
* USB_DEVICE_ATTACH_AUTO_DISABLE:
* \code #define USB_DEVICE_ATTACH_AUTO_DISABLE \endcode
* User C file contains:
- * \code
+ * \code
// Authorize VBUS monitoring
if (!udc_include_vbus_monitoring()) {
// Implement custom VBUS monitoring via GPIO or other
@@ -159,7 +159,7 @@ extern "C" {
* USB_DEVICE_ATTACH_AUTO_DISABLE:
* \code #define USB_DEVICE_ATTACH_AUTO_DISABLE \endcode
* User C file contains:
- * \code
+ * \code
Event VBUS present() // VBUS interrupt or GPIO interrupt or ..
{
// Authorize battery charging, but wait key press to start USB.
@@ -446,7 +446,7 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
# define CONF_CLOCK_DFLL_LOOP_MODE SYSTEM_CLOCK_DFLL_LOOP_MODE_USB_RECOVERY
# define CONF_CLOCK_DFLL_ON_DEMAND true
- // Set this to true to configure the GCLK when running clocks_init.
+ // Set this to true to configure the GCLK when running clocks_init.
// If set to false, none of the GCLK generators will be configured in clocks_init().
# define CONF_CLOCK_CONFIGURE_GCLK true
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.c b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.c
index 7844c08920e024ad788f28495e526b0d536a45b9..f8ae82cf8b82838592e1da53e4df7e3595a70eaf 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.c
+++ b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.c
@@ -977,7 +977,7 @@ static iram_size_t udi_cdc_multi_read_no_polling(uint8_t port, void* buf, iram_s
if (!udi_cdc_data_running) {
return 0;
}
-
+
//Get number of available data
// Check available data
flags = cpu_irq_save(); // to protect udi_cdc_rx_pos & udi_cdc_rx_buf_sel
@@ -995,7 +995,7 @@ static iram_size_t udi_cdc_multi_read_no_polling(uint8_t port, void* buf, iram_s
flags = cpu_irq_save(); // to protect udi_cdc_rx_pos
udi_cdc_rx_pos[port] += size;
cpu_irq_restore(flags);
-
+
ptr_buf += size;
udi_cdc_rx_start(port);
}
@@ -1036,7 +1036,7 @@ iram_size_t udi_cdc_multi_get_free_tx_buffer(uint8_t port)
buf_sel_nb = 0;
}
}
- retval = UDI_CDC_TX_BUFFERS - buf_sel_nb;
+ retval = UDI_CDC_TX_BUFFERS - buf_sel_nb;
cpu_irq_restore(flags);
return retval;
}
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_composite_desc.c b/Marlin/src/HAL/HAL_DUE/usb/udi_composite_desc.c
index 85f81999fde80d2234684776f3bde366ce67bba4..6ba06afbf973201eb0184579f85272ade65930aa 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/udi_composite_desc.c
+++ b/Marlin/src/HAL/HAL_DUE/usb/udi_composite_desc.c
@@ -43,8 +43,8 @@
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
-
-#ifdef ARDUINO_ARCH_SAM
+
+#ifdef ARDUINO_ARCH_SAM
#include "conf_usb.h"
#include "udd.h"
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_msc.c b/Marlin/src/HAL/HAL_DUE/usb/udi_msc.c
index f8f93a09c565a73c0708db367ea1d472140a806b..2dd9ad5353280a82ca235e94f34e5be3501391e7 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/udi_msc.c
+++ b/Marlin/src/HAL/HAL_DUE/usb/udi_msc.c
@@ -43,8 +43,8 @@
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
-
-#ifdef ARDUINO_ARCH_SAM
+
+#ifdef ARDUINO_ARCH_SAM
#include "conf_usb.h"
#include "usb_protocol.h"
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_msc.h b/Marlin/src/HAL/HAL_DUE/usb/udi_msc.h
index 7a76ad84fc992d9c5f17d5158c0b598cf6025c82..c632ee4aacee8d76399438fcaf76506da198781b 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/udi_msc.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/udi_msc.h
@@ -174,14 +174,14 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
/**
* \page udi_msc_quickstart Quick start guide for USB device Mass Storage module (UDI MSC)
*
- * This is the quick start guide for the \ref udi_msc_group
- * "USB device interface MSC module (UDI MSC)" with step-by-step instructions on
+ * This is the quick start guide for the \ref udi_msc_group
+ * "USB device interface MSC module (UDI MSC)" with step-by-step instructions on
* how to configure and use the modules in a selection of use cases.
*
* The use cases contain several code fragments. The code fragments in the
* steps for setup can be copied into a custom initialization function, while
* the steps for usage can be copied into, e.g., the main application function.
- *
+ *
* \section udi_msc_basic_use_case Basic use case
* In this basic use case, the "USB MSC (Single Interface Device)" module is used.
* The "USB MSC (Composite Device)" module usage is described in \ref udi_msc_use_cases
@@ -246,7 +246,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* - \code #define UDI_MSC_ENABLE_EXT() my_callback_msc_enable()
extern bool my_callback_msc_enable(void); \endcode
* \note After the device enumeration (detecting and identifying USB devices),
- * the USB host starts the device configuration. When the USB MSC interface
+ * the USB host starts the device configuration. When the USB MSC interface
* from the device is accepted by the host, the USB host enables this interface and the
* UDI_MSC_ENABLE_EXT() callback function is called and return true.
* Thus, when this event is received, the tasks which call
@@ -256,7 +256,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* \note When the USB device is unplugged or is reset by the USB host, the USB
* interface is disabled and the UDI_MSC_DISABLE_EXT() callback function
* is called. Thus, it is recommended to disable the task which is called udi_msc_process_trans().
- * -# The MSC is automatically linked with memory control access component
+ * -# The MSC is automatically linked with memory control access component
* which provides the memories interfaces. However, the memory data transfers
* must be done outside USB interrupt routine. This is done in the MSC process
* ("udi_msc_process_trans()") called by main loop:
@@ -288,7 +288,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
* In this use case, the "USB MSC (Composite Device)" module is used to
* create a USB composite device. Thus, this USB module can be associated with
* another "Composite Device" module, like "USB HID Mouse (Composite Device)".
- *
+ *
* Also, you can refer to application note
* <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
* AVR4902 ASF - USB Composite Device</A>.
diff --git a/Marlin/src/HAL/HAL_DUE/usb/uotghs_device_due.c b/Marlin/src/HAL/HAL_DUE/usb/uotghs_device_due.c
index 0853a4af0c1758ea353f1efdabfd180e40b055fb..243e2db5417d17167269bc762af5aa20db50ac45 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/uotghs_device_due.c
+++ b/Marlin/src/HAL/HAL_DUE/usb/uotghs_device_due.c
@@ -43,7 +43,7 @@
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
-
+
#ifdef ARDUINO_ARCH_SAM
#include "compiler.h"
diff --git a/Marlin/src/HAL/HAL_DUE/usb/uotghs_otg.h b/Marlin/src/HAL/HAL_DUE/usb/uotghs_otg.h
index 4fb0ba7c1f53051654d77cf1ae7a35da8311e79b..34436165e2ee6832376f844aaa7fc3dee338229d 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/uotghs_otg.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/uotghs_otg.h
@@ -136,17 +136,17 @@ void otg_dual_disable(void);
} while (0)
//! Enable USB macro
#define otg_enable() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_USBE))
- //! Disable USB macro
+ //! Disable USB macro
#define otg_disable() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_USBE))
#define Is_otg_enabled() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_USBE))
- //! Enable OTG pad
+ //! Enable OTG pad
#define otg_enable_pad() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_OTGPADE))
- //! Disable OTG pad
+ //! Disable OTG pad
#define otg_disable_pad() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_OTGPADE))
#define Is_otg_pad_enabled() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_OTGPADE))
- //! Check Clock Usable
+ //! Check Clock Usable
//! For parts with HS feature, this one corresponding at UTMI clock
#define Is_otg_clock_usable() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_CLKUSABLE))
diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp b/Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp
index eb8d5ba98303218d8ae70d1900ea8d5455b25894..f027d60744a2f52da2fb016d3016a9e835d7804a 100644
--- a/Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp
+++ b/Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp
@@ -303,9 +303,9 @@ PinCfg.Portnum = LPC1768_PIN_PORT(MISO_PIN);
/** Begin SPI transaction, set clock, bit order, data mode */
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
// TODO: to be implemented
-
- }
-
+
+ }
+
#endif // ENABLED(LPC_SOFTWARE_SPI)
#endif // TARGET_LPC1768
diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_timers.h b/Marlin/src/HAL/HAL_LPC1768/HAL_timers.h
index fcf1dd15460765bf195b6304a4ace58e4640b181..34b3b24b9a8a0a3552b8d6ed6b018773f08b3d98 100644
--- a/Marlin/src/HAL/HAL_LPC1768/HAL_timers.h
+++ b/Marlin/src/HAL/HAL_LPC1768/HAL_timers.h
@@ -66,7 +66,7 @@ typedef uint32_t hal_timer_t;
#define HAL_STEP_TIMER_ISR extern "C" void TIMER0_IRQHandler(void)
#define HAL_TEMP_TIMER_ISR extern "C" void TIMER1_IRQHandler(void)
-// PWM timer
+// PWM timer
#define HAL_PWM_TIMER LPC_TIM3
#define HAL_PWM_TIMER_ISR extern "C" void TIMER3_IRQHandler(void)
#define HAL_PWM_TIMER_IRQn TIMER3_IRQn
diff --git a/Marlin/src/HAL/HAL_LPC1768/LPC1768_PWM.cpp b/Marlin/src/HAL/HAL_LPC1768/LPC1768_PWM.cpp
index 858ded3844e57016334c6ff13b5523954dd3a4fc..e9bbb9bb09a22699363029aa233921e5a2a0852a 100644
--- a/Marlin/src/HAL/HAL_LPC1768/LPC1768_PWM.cpp
+++ b/Marlin/src/HAL/HAL_LPC1768/LPC1768_PWM.cpp
@@ -506,7 +506,7 @@ HAL_PWM_TIMER_ISR {
if (first_active_entry) next_MR1_val = LPC_PWM1_MR0 + 1; // empty table so disable MR1 interrupt
HAL_PWM_TIMER->MR1 = MAX(next_MR1_val, HAL_PWM_TIMER->TC + PWM_LPC1768_ISR_SAFETY_FACTOR); // set next
in_PWM_isr = false;
-
+
exit_PWM_ISR:
return;
}
diff --git a/Marlin/src/HAL/HAL_LPC1768/arduino.cpp b/Marlin/src/HAL/HAL_LPC1768/arduino.cpp
index b6a4b8c5cf70a0ecf488828a071b3e0f2b781069..feab1e8b092b86dbef3e1335e70a3cd8e23244b5 100644
--- a/Marlin/src/HAL/HAL_LPC1768/arduino.cpp
+++ b/Marlin/src/HAL/HAL_LPC1768/arduino.cpp
@@ -136,7 +136,7 @@ void analogWrite(pin_t pin, int pwm_value) { // 1 - 254: pwm_value, 0: LOW, 255
digitalWrite(pin, value);
}
else {
- if (LPC1768_PWM_attach_pin(pin, 1, LPC_PWM1->MR0, 0xff))
+ if (LPC1768_PWM_attach_pin(pin, 1, LPC_PWM1->MR0, 0xFF))
LPC1768_PWM_write(pin, map(value, 0, 255, 1, LPC_PWM1->MR0)); // map 1-254 onto PWM range
else { // out of PWM channels
if (!out_of_PWM_slots) MYSERIAL.printf(".\nWARNING - OUT OF PWM CHANNELS\n.\n"); //only warn once
diff --git a/Marlin/src/HAL/HAL_LPC1768/pinmapping.h b/Marlin/src/HAL/HAL_LPC1768/pinmapping.h
index 3e9c9701c9309d0c3dfb556e8162b91ea45c4d49..622baaa7c4cb61164f3113a35baedeb143227b55 100644
--- a/Marlin/src/HAL/HAL_LPC1768/pinmapping.h
+++ b/Marlin/src/HAL/HAL_LPC1768/pinmapping.h
@@ -253,7 +253,7 @@ constexpr pin_t adc_pin_table[] = {
#else
#define NUM_ANALOG_INPUTS 6
#endif
-
+
// P0.6 thru P0.9 are for the onboard SD card
// P0.29 and P0.30 are for the USB port
#define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09, P0_29, P0_30
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp
index 650938c136c5b4e9d37d4068aaca5145643f7b58..c38cee2e9aa46ed4cad3216d8711b6b83133b6ff 100644
--- a/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp
@@ -167,9 +167,9 @@ void spiSendBlock(uint8_t token, const uint8_t* buf) {
/** Begin SPI transaction, set clock, bit order, data mode */
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
spiConfig = SPISettings(spiClock, bitOrder, dataMode);
-
+
SPI.beginTransaction(spiConfig);
-}
+}
#endif // SOFTWARE_SPI
diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp
index 25b3dc935574d8a05148a05ae8e05d8461b54461..e50e42556e3b5228e451b2752ef2760e0976a871 100644
--- a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp
+++ b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp
@@ -105,8 +105,7 @@ void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
spiConfig = SPISettings(spiClock, bitOrder, dataMode);
- SPI.beginTransaction(spiConfig);
-}
-
+ SPI.beginTransaction(spiConfig);
+}
-#endif
+#endif // __MK64FX512__ || __MK66FX1M0__
diff --git a/Marlin/src/gcode/config/M43.cpp b/Marlin/src/gcode/config/M43.cpp
index efbef5d1e64bb62f1ba10149dee0c32125726164..d9e78baa45e09a8a8ef369f04e57030a92a01ed6 100644
--- a/Marlin/src/gcode/config/M43.cpp
+++ b/Marlin/src/gcode/config/M43.cpp
@@ -270,7 +270,7 @@ void GcodeSuite::M43() {
// Watch until click, M108, or reset
if (parser.boolval('W')) {
SERIAL_PROTOCOLLNPGM("Watching pins");
-
+
#ifdef ARDUINO_ARCH_SAM
NOLESS(first_pin, 2); // don't hijack the UART pins
#endif
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index 35c381b03221c11fa5cadf97337a1ae193d422e6..ee7e1126f8cc96bcb057c143dc367744a13a4969 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -56,7 +56,7 @@
#define ENCODER_FEEDRATE_DEADZONE 2
#define REVERSE_MENU_DIRECTION
-#elif ENABLED(RADDS_DISPLAY)
+#elif ENABLED(RADDS_DISPLAY)
#define ULTIPANEL
#define ENCODER_PULSES_PER_STEP 2
diff --git a/Marlin/src/lcd/ultralcd_impl_DOGM.h b/Marlin/src/lcd/ultralcd_impl_DOGM.h
index cf1719297f276ed94128334e33d7144501f5ed34..57f9ab1ae058e85fbccf53234272a87b60d65e81 100644
--- a/Marlin/src/lcd/ultralcd_impl_DOGM.h
+++ b/Marlin/src/lcd/ultralcd_impl_DOGM.h
@@ -187,7 +187,7 @@
// Based on the Adafruit ST7565 (http://www.adafruit.com/products/250)
//U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes
U8GLIB_LM6059_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
-
+
#elif ENABLED(U8GLIB_ST7565_64128N)
// The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller
//U8GLIB_64128N_2X_HAL u8g(DOGLCD_CS, DOGLCD_A0); // using HW-SPI
diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp
index 5b986e9e418f483bb8c49dbb81d3319d1a190512..f872dd2cb116007c4231385333a19e1b3dab0b2f 100644
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@@ -2079,7 +2079,7 @@ void MarlinSettings::reset() {
CONFIG_ECHO_START;
#if ENABLED(SKEW_CORRECTION_FOR_Z)
SERIAL_ECHO(" M852 I");
- SERIAL_ECHO_F(LINEAR_UNIT(planner.xy_skew_factor),6);
+ SERIAL_ECHO_F(LINEAR_UNIT(planner.xy_skew_factor), 6);
SERIAL_ECHOPAIR(" J", LINEAR_UNIT(planner.xz_skew_factor));
SERIAL_ECHOLNPAIR(" K", LINEAR_UNIT(planner.yz_skew_factor));
#else
diff --git a/Marlin/src/pins/pins_CHEAPTRONICv2.h b/Marlin/src/pins/pins_CHEAPTRONICv2.h
index 6c0d3a58f9df92232cebe3fd25ac7194c04c6210..327883898aa666da98ba6c1f41d42b671a4775d3 100644
--- a/Marlin/src/pins/pins_CHEAPTRONICv2.h
+++ b/Marlin/src/pins/pins_CHEAPTRONICv2.h
@@ -110,7 +110,7 @@
// Other board specific pins
//
#define FIL_RUNOUT_PIN 37 // board input labeled as F-DET
-#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe)
+#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe)
#define LED_PIN 13
#define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too
#define EXT_2 5 // additional PWM pin 2 at JP1 connector
diff --git a/Marlin/src/pins/pins_MKS_BASE.h b/Marlin/src/pins/pins_MKS_BASE.h
index 60f9678aacc3852bfe1c055de6c28f5502654dcb..6c6e11496b8cef079ff282438bfdbb5e4343927c 100644
--- a/Marlin/src/pins/pins_MKS_BASE.h
+++ b/Marlin/src/pins/pins_MKS_BASE.h
@@ -40,7 +40,7 @@
// XSTEP,YSTEP ... must be adapted with M92 accordingly (128/16 => multiply by factor 8).
*/
#define X_MS1_PIN 5 // Digital 3 / Pin 5 / PE3
-#define X_MS2_PIN 6 // Digital 6 / Pin 14 / PH3
+#define X_MS2_PIN 6 // Digital 6 / Pin 14 / PH3
#define Y_MS1_PIN 59 // Analog 5 / Pin 92 / PF5
#define Y_MS2_PIN 58 // Analog 4 / Pin 93 / PF4
#define Z_MS1_PIN 22 // Digital 22 / Pin 78 / PA0