diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h index 24404c8555f31b03383c18d33f04fa4e2b582e45..ce7becf0479b451478bb19e34942d4b7b6fbdc9e 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h @@ -932,6 +932,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h index 59f42da893bc2562ed357c9cb088f9fa5e654a12..8aacd1fa1af62007093aeba2469199c0875335e0 100644 --- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h +++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index 4ac60c6e3f9f633fa7f6fcd022d02dfb7b10fdb2..4653910010ec18580447323e6985c48da4372ea9 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -1022,6 +1022,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index f1cead72ab00173fd055d385e88ef80826ab9554..8cfb91e57910bdc6c484f5cd656168737dba22dd 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -919,6 +919,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h index f0f67de4c1663471bba775929d52fd21f81f6139..3e7c40e88fe781bdfab89d35946295b03acfd68f 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h index aff69197728168611cc52e818346ba887ef44db7..0fb4a822865efed033e377aafd3d7fb79b50ca4e 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -912,6 +912,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h index de928339696a633edaad93525f3a3bc51a523729..e9198a70da2daae589455034fd0d878260060d35 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h @@ -912,6 +912,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h index 9a86568a68f3921df22a7e0a4b5ec72435d5e56d..b4b486d19d96656cc9463fe23ba686830f0a940c 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h @@ -900,6 +900,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index 201a04ebe23755396cb7ad161d51a25639a36767..dde324069fbd196b31e11a53bc15f2d6f6284441 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -898,6 +898,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h index 1a386a8b4b38400bb804361640ed91a4701e810e..4b800d8f5cb304d8b665af0e2c72b78c70d616be 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h @@ -900,6 +900,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h index 58eacfddd42bfa88ce0aa5e57805887daee7b0cb..6589a250338fa07b4dc81c7fbfb98e4d6dca68fa 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration.h +++ b/Marlin/src/config/examples/Cartesio/Configuration.h @@ -911,6 +911,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h index 3a9834faff57dfcd93b50b015782f0a3259a2fe7..71ea04793a003d2304395c09a35ed70b6b90fff3 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h @@ -922,6 +922,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h index 5b5885370af7e6d9a8f7a10219d8899373055458..c86eaa18eb24de504c816ccc143862503ab43cc4 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h @@ -904,6 +904,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h index 2cb789e80dd0d693f52893f4114a498cf05bbbef..cea3412da58127ed25fed9360b47e9cd01945347 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h @@ -931,6 +931,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration.h b/Marlin/src/config/examples/Creality/Ender/Configuration.h index 9cda5a5210193238214be5da0717970b5d84f5a1..7df048085fcf9b9a536773d8e26a5035b8e44508 100644 --- a/Marlin/src/config/examples/Creality/Ender/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender/Configuration.h @@ -907,6 +907,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h index b46051d34309dfb39178ff419140b82df9485c26..ce1494e84d15e683344c2c5b7c7756978d72e078 100644 --- a/Marlin/src/config/examples/Felix/Configuration.h +++ b/Marlin/src/config/examples/Felix/Configuration.h @@ -894,6 +894,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h index 4434d5b09d28379b671978c87f0bebb6e8ee8c8a..295459fcc5bc32646a8e67ce97acec1f8a9c435c 100644 --- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h +++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h @@ -894,6 +894,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h index 90655512902e630c5641e1ae7d7b32ec93f0fa18..36af811cf7e4fecd3d6914e47c0175c6bab82b9b 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h @@ -918,6 +918,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h index f9fc66e2d33b750eda1587a88cf15f5a59b84f82..100da5e4bab8ad55541470b5ffaf72a0af10d4fd 100644 --- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h @@ -927,6 +927,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index aa3e1608f7a8bfcf17757d98671569bc06a63ac8..929ea47c1f94d05e00d64ce9ec4c3fe6546e67c2 100644 --- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index d9521fe21c3dffab03dd3d2a736107f78ce055b7..3e8389802f3ee65c6c1d7f0d4f0e412ef7484931 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -919,6 +919,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 49065f85b03d3c922d320978ef2c3172deebee50..a0af8ee708634d42a3101e017089b2fe1f0cc519 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -918,6 +918,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h index 9ad2cefbbdc0da731a8ec1fde28d9295f07f45b2..35187d90acacd52259907ff6e0d18e0f896ec54c 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h @@ -916,6 +916,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h index 1abc4f83b1b9311ff74a4cdc5fcc9711434d4abc..e3d0b66654afa7300bde04c8a05c4bfe0ff5f6ab 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h @@ -924,6 +924,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h index 4887deace9487f3bef99bcdcdee176019e2c30a3..8effde21693b62fee2279b8fcd3846ec8fb67d95 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration.h +++ b/Marlin/src/config/examples/MakerParts/Configuration.h @@ -932,6 +932,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index b85ecbea1023d606aa049b70de4dec93f0c7863f..692eb1a82d51da9b79dec3ddd3e5967db5dbecef 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -940,6 +940,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h index b676c2b1a7615c981ad7ed530c50d83550a9e199..f84d120aadfe101674950effe53fe38795b55d3f 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h @@ -911,6 +911,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h index de59235b22cf5bada075e5f712e6891006d4a35d..c3de82d3e580b17c60978e9e470907a5740082b9 100644 --- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h @@ -916,6 +916,12 @@ //#define AUTO_BED_LEVELING_UBL #define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h index 452b42ea7d07986695c4ec5f3866aa81d8a187b4..1aa1c6f0ba530a2548cabe730d23295ab8cc7b30 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h @@ -916,6 +916,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h index ae8ffda0c4544f8a443f2d5593a192243b8eb257..7fd2cf7b5115295cea2ab5e8a201d6cde20a1936 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h index 348f4b82a65a816cf832f14bfcbfc2a070918053..a4d3606033afb3b6231ca0d32c2acddbb82c7aa7 100644 --- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h index 4111793bc34b958d3e630b6cfc747aa94fb61e46..e00a92d60ff474936fd208f3090a5ef89a2d0b1a 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration.h +++ b/Marlin/src/config/examples/RigidBot/Configuration.h @@ -910,6 +910,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h index fcc2e7b415d22a20d7b445f41e877548bd941d9b..de211ff10e4f1c8c320a7fd20a9f1a5a3e33849e 100644 --- a/Marlin/src/config/examples/SCARA/Configuration.h +++ b/Marlin/src/config/examples/SCARA/Configuration.h @@ -924,6 +924,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h index 4617dcee23c9e7f04296752d6b23edbe40abc637..85d857797b738a43c560cb8571c775701aff1819 100644 --- a/Marlin/src/config/examples/STM32F10/Configuration.h +++ b/Marlin/src/config/examples/STM32F10/Configuration.h @@ -915,6 +915,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h index 538c600749465f3d2a67c29ae9bdee8378966630..71e0363f55110c6b3aab9b13411122a143a2e0dc 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h @@ -943,6 +943,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h index 833715b1d9a3b043fc02e32ed11058e1a50992ce..3dbe58b366de16af8a7ac3e4bb67109af9ea7716 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration.h +++ b/Marlin/src/config/examples/TheBorg/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h index 77f2437ed289fcc0c9472bc4a156bb62e24e0335..a0d98b012656619898f5f26676838f52927d12bf 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h @@ -968,6 +968,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h index fe494ae70703f6cbc67af1647288e53e7fb98c14..6d2466444ec82dd8fa173ad667d4f1c2c90a1fd5 100644 --- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h @@ -903,6 +903,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h index 465d717abcdaa6562a7061ff5df92836d98a9eb2..2d8e21bf8641eae1c0c07b911f90877d5f81f8d4 100644 --- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h index dee561d48075ea7a64d4c088c3e0163503453784..d305200fd6ec4bda0caa7d452ca4f55b38280c3c 100644 --- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h @@ -923,6 +923,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h index 286baaf570c756a80b1f3db385768a4eddec53a9..ca6ed17565bbf9b4cc4f03cf25b7ef141230aec8 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h @@ -903,6 +903,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h index 5984775eb5c7fbf1aa7cfefedd274e7e2f9bead0..22e0789861b4c67146ef7f52191d190c3b915ed8 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h @@ -942,6 +942,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h index a6303c8d7453eed955230951ff1307ea9b371f6f..8573366ac8fc883cf5be2762a10c9a12b1e07738 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h index fb7a34cf5d60c3c6c5d99cbb20c66b1a26627f01..341dd1367b9635b4be3993f6177f08bf63634763 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h index 2c900678f5faa4468bb03ce0b69b69d7b9d8aa40..abd4c1a2fc69018d4d7811cc87f431996f25fbc7 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -913,6 +913,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h index 6338967a3d27ca5d00e486608a3a64790bb311ed..43bbb54d01179afde48d8cc8246d418a0613830e 100644 --- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h +++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h @@ -912,6 +912,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 26ee3f8250906422e039114524ff57a974764815..cbc546cff24f096c7ceb9da5d3807a65c1b4a0b1 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1042,6 +1042,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h index a15e8857548f7a3cdd2c651cd8055f822660d3e8..8abc72dc080d47d574635f931933a426a736ce5d 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1033,6 +1033,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 1a9ab7101a012deff8ae103b15c1effac8b2e074..51d0d64edb4882a0ade6fd5d41c7d0c25dc6d461 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1042,6 +1042,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h index 0598a3a4d343266d21635edb30c285fa8a2e1b5d..c79d6e8213a0cdd65fd76a8ac70da93f635a4fe4 100644 --- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1045,6 +1045,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index d10edb2768327c29116250dfc732ece1f4268563..5e3de46512d1019210a997b4e3c543be99f3b4ea 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -1029,6 +1029,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index 537ee791b19c5d76ebf4be745653b60d33491b28..f44de6ee0b4dbbfff9a7ce29c0591760d400160f 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -1032,6 +1032,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index 865505eb53a5841a95907b2e0d5b8a0131b7efa5..d429fa0013c26658652593532473995ca6785fc3 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -1032,6 +1032,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index dd9ff1c6518091a5953a6f552a6430df0c2ba5a4..a094fdc4ab0b0783354ac548f8ddcc1a2ac3ff3f 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -1041,6 +1041,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index ce18c8ab9c0aaa4b134ab83919d079c8ee1c9f18..ba34d31538e04484832c9cd411e3b8d1f2e2d2ce 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -926,6 +926,12 @@ #define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h index c6242369a16f45d5afa868bd74bb016ca4ea66ca..9e9c6596a45aaba082ec83a3d533fd80ee475be2 100644 --- a/Marlin/src/config/examples/makibox/Configuration.h +++ b/Marlin/src/config/examples/makibox/Configuration.h @@ -915,6 +915,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h index f89b6b002de56d44a1d7bf99aefa05dd9cbc20f8..3de98375d2b0b4215760a2745c2a3b3f811301e8 100644 --- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h +++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h @@ -913,6 +913,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h index ac058e2d288120fd4c3b382c1e61b4cdb4d204d3..8c563965328ebd553837d347b0d057768dd1047b 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h @@ -907,6 +907,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'. diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index 7c433eaed1415eee2b3a0fcd429c1bb5dbedad7c..f63a474ede922af5a030c5e490f124bdbb69bc29 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -917,6 +917,12 @@ //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + /** * Enable detailed logging of G28, G29, M48, etc. * Turn on with the command 'M111 S32'.