From 143ad74db70a363d977a2ef67b00cf22252eb1d8 Mon Sep 17 00:00:00 2001
From: jbrazio <jbrazio@gmail.com>
Date: Mon, 29 Feb 2016 11:27:09 +0000
Subject: [PATCH] Update PROBE_OFFSET_FROM_EXTRUDER comment section in all
example config files.
---
Marlin/Configuration.h | 37 +++++++++----------
.../Felix/Configuration.h | 23 ++++++++++--
.../Felix/Configuration_DUAL.h | 23 ++++++++++--
.../Hephestos/Configuration.h | 23 ++++++++++--
.../K8200/Configuration.h | 23 ++++++++++--
.../RepRapWorld/Megatronics/Configuration.h | 23 ++++++++++--
.../RigidBot/Configuration.h | 23 ++++++++++--
.../SCARA/Configuration.h | 23 ++++++++++--
.../TAZ4/Configuration.h | 23 ++++++++++--
.../WITBOX/Configuration.h | 23 ++++++++++--
.../adafruit/ST7565/Configuration.h | 23 ++++++++++--
.../delta/biv2.5/Configuration.h | 23 ++++++++++--
.../delta/generic/Configuration.h | 17 ++++++++-
.../delta/kossel_mini/Configuration.h | 23 ++++++++++--
.../delta/kossel_pro/Configuration.h | 17 ++++++++-
.../delta/kossel_xl/Configuration.h | 27 +++++++++++---
.../makibox/Configuration.h | 23 ++++++++++--
.../tvrrug/Round2/Configuration.h | 23 ++++++++++--
18 files changed, 336 insertions(+), 84 deletions(-)
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 7de3c46a6e..986dcc8aea 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -488,26 +488,23 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- /*
- * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
- * X and Y offsets must be integers.
- *
- * In the following example the X and Y offsets are both positive:
- * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
- * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
- *
- * +-- BACK ---+
- * | |
- * L | (+) P | R <-- probe (20,20)
- * E | | I
- * F | (-) N (+) | G <-- nozzle (10,10)
- * T | | H
- * | (-) | T
- * | |
- * O-- FRONT --+
- * (0,0)
- *
- */
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
+ // X and Y offsets must be integers.
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left [of the nozzle] +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Z offset: -front [of the nozzle] +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below [the nozzle] (always negative!)
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index dd126bd33f..a4eccb0722 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -470,11 +470,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h
index f487926edc..95f5e143f6 100644
--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@@ -441,11 +441,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 1fd76a5a26..8caf0f610b 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -481,11 +481,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 40a3836702..ee5ab3f594 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -503,11 +503,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index ef5e6c14cf..62c4483e68 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -489,11 +489,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 4d52a0823e..73a3db8739 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -479,11 +479,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 6e262364d0..ef35f6b428 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -496,11 +496,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
//#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index 3b55779c75..d2e2c7d259 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -507,11 +507,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 24ca92a926..e3a3a312ad 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -480,11 +480,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 8f23c4337e..48f1b16c3c 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -489,11 +489,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index e26f970815..9111e3dc67 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -527,11 +527,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 6c27ff0966..5397ca343b 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -528,8 +528,23 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // Z probe to nozzle X offset: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z probe to nozzle Y offset: -front +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z probe to nozzle Z offset: -below (always!)
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 119537ed37..965fef895b 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -528,11 +528,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 15 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 74ec19cf93..fb9025e715 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -515,8 +515,23 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
#define X_PROBE_OFFSET_FROM_EXTRUDER -23 // KosselPro actual: -22.919
#define Y_PROBE_OFFSET_FROM_EXTRUDER -6 // KosselPro actual: -6.304
// Kossel Pro note: The correct value is likely -17.45 but I'd rather err on the side of
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index ead4199a47..4a536b76f8 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -520,11 +520,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER 0.0 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 7 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
@@ -617,7 +632,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define HOMING_FEEDRATE {60*60, 60*60, 60*60, 0} // set the homing speeds (mm/min)
// default settings
-#define XYZ_FULL_STEPS_PER_ROTATION 200
+#define XYZ_FULL_STEPS_PER_ROTATION 200
#define XYZ_MICROSTEPS 16
#define XYZ_BELT_PITCH 2
#define XYZ_PULLEY_TEETH 16
@@ -779,7 +794,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
//#define LCD_I2C_VIKI
-
+
// SSD1306 OLED generic display support
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define U8GLIB_SSD1306
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 00acc568e6..826d0339de 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -491,11 +491,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index edd49e799e..1d491946d3 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -479,11 +479,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
--
GitLab