diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 7de3c46a6e34a22e751a9d6f290986211790a7c4..986dcc8aea114e013800f1402d067f8ecd27eb47 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -488,26 +488,23 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- /*
- * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
- * X and Y offsets must be integers.
- *
- * In the following example the X and Y offsets are both positive:
- * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
- * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
- *
- * +-- BACK ---+
- * | |
- * L | (+) P | R <-- probe (20,20)
- * E | | I
- * F | (-) N (+) | G <-- nozzle (10,10)
- * T | | H
- * | (-) | T
- * | |
- * O-- FRONT --+
- * (0,0)
- *
- */
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
+ // X and Y offsets must be integers.
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left [of the nozzle] +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Z offset: -front [of the nozzle] +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below [the nozzle] (always negative!)
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index dd126bd33fcd911c496ea0c238d10e41a4b9602f..a4eccb07224e599f1a5857a3647908c291f8ff12 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -470,11 +470,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h
index f487926edc97942d4c2b6943a0eec0126aee21e1..95f5e143f63d74aed988306a3cdc68d892317d23 100644
--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@@ -441,11 +441,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 1fd76a5a26d535dcfa930d993a9cc4550bc9356c..8caf0f610bfe6a6c04720f74df0c584db6d2783d 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -481,11 +481,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 40a38367028a9d10f3ed1bcb7b523d9180eeab34..ee5ab3f594bb305fff6f542ee5b4e98f697ecf0f 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -503,11 +503,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index ef5e6c14cf0aeb43c6efc922e1b46db92ceb48e0..62c4483e687072564e76217624bb0e8038d59637 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -489,11 +489,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 4d52a0823ed8806c51c9a48529f6e80acf38bcc7..73a3db8739b90cc320a457258b8a91cb7d19b868 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -479,11 +479,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 6e262364d0b406e48b1b607a4fb59061cddb9141..ef35f6b428f6a4cabb7007cc86789d198c8e5fdc 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -496,11 +496,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
//#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index 3b55779c75b1198118dd0b4556f8c4edafe79afc..d2e2c7d259eca45a010ae60a5f18cb8dcbdf7c3d 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -507,11 +507,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 24ca92a92627b295add066109a3902a3384ae80d..e3a3a312ad589464e44b555fb21d02561e6201ea 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -480,11 +480,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 8f23c4337e2e2870d43d2d552e4e1de023860112..48f1b16c3cf7be04a8526d805ad69a5e67be0439 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -489,11 +489,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index e26f970815f4b3e2ef34b8e95d469dea7ef1eb63..9111e3dc672fb7fa388018bf25a52d48460b7774 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -527,11 +527,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 6c27ff09660208f4812e1df75030d7250fb3d14e..5397ca343b7af3b452950168214a8dfde5479e5f 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -528,8 +528,23 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // Z probe to nozzle X offset: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z probe to nozzle Y offset: -front +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z probe to nozzle Z offset: -below (always!)
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 119537ed37be2892a7dfacb25afcb29f992a6a78..965fef895bea39ef00cf400efa456b1e0310be14 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -528,11 +528,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 15 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 74ec19cf931f343114bf36aa8cdd2225fcd7fbaf..fb9025e71589fa34742598e676058a00f53e46cb 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -515,8 +515,23 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
#define X_PROBE_OFFSET_FROM_EXTRUDER -23 // KosselPro actual: -22.919
#define Y_PROBE_OFFSET_FROM_EXTRUDER -6 // KosselPro actual: -6.304
// Kossel Pro note: The correct value is likely -17.45 but I'd rather err on the side of
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index ead4199a4778c6fbdca4ada0849138fb308ea4a6..4a536b76f81c02135b2746b4261e89186c0c295a 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -520,11 +520,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER 0.0 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 7 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
@@ -617,7 +632,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#define HOMING_FEEDRATE {60*60, 60*60, 60*60, 0} // set the homing speeds (mm/min)
// default settings
-#define XYZ_FULL_STEPS_PER_ROTATION 200
+#define XYZ_FULL_STEPS_PER_ROTATION 200
#define XYZ_MICROSTEPS 16
#define XYZ_BELT_PITCH 2
#define XYZ_PULLEY_TEETH 16
@@ -779,7 +794,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
//#define LCD_I2C_VIKI
-
+
// SSD1306 OLED generic display support
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define U8GLIB_SSD1306
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 00acc568e69cdb0357bbe49e1e523c0d13f5528a..826d0339de88383f9dd3984e1c18bc5d9eb31dbe 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -491,11 +491,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index edd49e799e6e30883220e66be3e6889f1f8ea426..1d491946d3eddd0081e14ea966fb396b51f4abf8 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -479,11 +479,26 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
#endif // AUTO_BED_LEVELING_GRID
- // Offsets to the Z probe relative to the nozzle tip.
+ // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
- #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Z probe to nozzle X offset: -left +right
- #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z probe to nozzle Y offset: -front +behind
- #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z probe to nozzle Z offset: -below (always!)
+ //
+ // In the following example the X and Y offsets are both positive:
+ // #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ // #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ //
+ // +-- BACK ---+
+ // | |
+ // L | (+) P | R <-- probe (20,20)
+ // E | | I
+ // F | (-) N (+) | G <-- nozzle (10,10)
+ // T | | H
+ // | (-) | T
+ // | |
+ // O-- FRONT --+
+ // (0,0)
+ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left [of the nozzle] +right
+ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Z offset: -front [of the nozzle] +behind
+ #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below [the nozzle] (always negative!)
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
// Be sure you have this distance over your Z_MAX_POS in case.