From 064177154ce7912293efa67c7e0dfcaa4a7301ec Mon Sep 17 00:00:00 2001
From: Andy Shaw <andy-git@gloomy-place.com>
Date: Wed, 26 Jun 2019 09:55:57 +0100
Subject: [PATCH] Update SD card connection / sharing options (#14325)
---
Marlin/Configuration_adv.h | 24 ++++++----
Marlin/src/HAL/HAL_LPC1768/SanityCheck.h | 8 ----
Marlin/src/HAL/HAL_LPC1768/main.cpp | 8 ++--
Marlin/src/Marlin.cpp | 2 +-
Marlin/src/core/drivers.h | 13 +++++-
Marlin/src/inc/Conditionals_post.h | 15 ++++++
Marlin/src/inc/SanityCheck.h | 6 +++
Marlin/src/lcd/ultralcd.cpp | 10 ++--
Marlin/src/pins/pins_AZSMZ_MINI.h | 20 ++++----
Marlin/src/pins/pins_AZTEEG_X5_MINI.h | 41 +++++++----------
Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h | 46 ++++++++-----------
Marlin/src/pins/pins_BIQU_SKR_V1.1.h | 45 ++++++++----------
Marlin/src/pins/pins_COHESION3D_REMIX.h | 28 ++++-------
Marlin/src/pins/pins_MKS_SBASE.h | 36 +++++----------
Marlin/src/pins/pins_RAMPS_RE_ARM.h | 28 ++++-------
config/default/Configuration_adv.h | 24 ++++++----
.../3DFabXYZ/Migbot/Configuration_adv.h | 24 ++++++----
.../AlephObjects/TAZ4/Configuration_adv.h | 24 ++++++----
.../AliExpress/UM2pExt/Configuration_adv.h | 24 ++++++----
config/examples/Anet/A2/Configuration_adv.h | 24 ++++++----
.../examples/Anet/A2plus/Configuration_adv.h | 24 ++++++----
config/examples/Anet/A6/Configuration_adv.h | 24 ++++++----
config/examples/Anet/A8/Configuration_adv.h | 24 ++++++----
.../examples/Anet/A8plus/Configuration_adv.h | 24 ++++++----
config/examples/Anet/E16/Configuration_adv.h | 24 ++++++----
.../examples/AnyCubic/i3/Configuration_adv.h | 24 ++++++----
config/examples/ArmEd/Configuration_adv.h | 24 ++++++----
.../BIBO/TouchX/cyclops/Configuration_adv.h | 24 ++++++----
.../BIBO/TouchX/default/Configuration_adv.h | 24 ++++++----
.../examples/BQ/Hephestos/Configuration_adv.h | 24 ++++++----
.../BQ/Hephestos_2/Configuration_adv.h | 24 ++++++----
config/examples/BQ/WITBOX/Configuration_adv.h | 24 ++++++----
config/examples/Cartesio/Configuration_adv.h | 24 ++++++----
.../Creality/CR-10/Configuration_adv.h | 24 ++++++----
.../Creality/CR-10S/Configuration_adv.h | 24 ++++++----
.../Creality/CR-10_5S/Configuration_adv.h | 24 ++++++----
.../Creality/CR-10mini/Configuration_adv.h | 24 ++++++----
.../Creality/CR-8/Configuration_adv.h | 24 ++++++----
.../Creality/Ender-2/Configuration_adv.h | 24 ++++++----
.../Creality/Ender-3/Configuration_adv.h | 24 ++++++----
.../Creality/Ender-4/Configuration_adv.h | 24 ++++++----
.../Dagoma/Disco Ultimate/Configuration_adv.h | 24 ++++++----
.../Sidewinder X1/Configuration_adv.h | 24 ++++++----
.../examples/Einstart-S/Configuration_adv.h | 24 ++++++----
config/examples/Felix/Configuration_adv.h | 24 ++++++----
.../FlashForge/CreatorPro/Configuration_adv.h | 24 ++++++----
.../FolgerTech/i3-2020/Configuration_adv.h | 24 ++++++----
.../Formbot/Raptor/Configuration_adv.h | 24 ++++++----
.../Formbot/T_Rex_2+/Configuration_adv.h | 24 ++++++----
.../Formbot/T_Rex_3/Configuration_adv.h | 24 ++++++----
.../Fysetc/AIO_II/Configuration_adv.h | 24 ++++++----
.../Fysetc/CHEETAH/Configuration_adv.h | 24 ++++++----
.../examples/Fysetc/F6_13/Configuration_adv.h | 24 ++++++----
.../examples/Geeetech/A10/Configuration_adv.h | 24 ++++++----
.../Geeetech/A10M/Configuration_adv.h | 24 ++++++----
.../Geeetech/A20M/Configuration_adv.h | 24 ++++++----
.../Geeetech/MeCreator2/Configuration_adv.h | 24 ++++++----
.../Prusa i3 Pro C/Configuration_adv.h | 24 ++++++----
.../Prusa i3 Pro W/Configuration_adv.h | 24 ++++++----
.../Infitary/i3-M508/Configuration_adv.h | 24 ++++++----
.../examples/JGAurora/A1/Configuration_adv.h | 24 ++++++----
.../examples/JGAurora/A5/Configuration_adv.h | 24 ++++++----
.../examples/JGAurora/A5S/Configuration_adv.h | 24 ++++++----
.../examples/MakerParts/Configuration_adv.h | 24 ++++++----
.../examples/Malyan/M150/Configuration_adv.h | 24 ++++++----
.../examples/Malyan/M200/Configuration_adv.h | 24 ++++++----
.../Micromake/C1/enhanced/Configuration_adv.h | 24 ++++++----
config/examples/Mks/Robin/Configuration_adv.h | 24 ++++++----
config/examples/Mks/Sbase/Configuration_adv.h | 24 ++++++----
.../RapideLite/RL200/Configuration_adv.h | 24 ++++++----
config/examples/RigidBot/Configuration_adv.h | 24 ++++++----
config/examples/SCARA/Configuration_adv.h | 24 ++++++----
.../Black_STM32F407VET6/Configuration_adv.h | 24 ++++++----
.../examples/Sanguinololu/Configuration_adv.h | 24 ++++++----
.../Tevo/Tarantula Pro/Configuration_adv.h | 24 ++++++----
config/examples/TheBorg/Configuration_adv.h | 24 ++++++----
config/examples/TinyBoy2/Configuration_adv.h | 24 ++++++----
.../examples/Tronxy/X3A/Configuration_adv.h | 24 ++++++----
.../Tronxy/X5S-2E/Configuration_adv.h | 24 ++++++----
.../UltiMachine/Archim1/Configuration_adv.h | 24 ++++++----
.../UltiMachine/Archim2/Configuration_adv.h | 24 ++++++----
.../examples/VORONDesign/Configuration_adv.h | 24 ++++++----
.../Velleman/K8200/Configuration_adv.h | 24 ++++++----
.../Velleman/K8400/Configuration_adv.h | 24 ++++++----
.../WASP/PowerWASP/Configuration_adv.h | 24 ++++++----
.../Wanhao/Duplicator 6/Configuration_adv.h | 24 ++++++----
.../delta/Anycubic/Kossel/Configuration_adv.h | 24 ++++++----
.../FLSUN/auto_calibrate/Configuration_adv.h | 24 ++++++----
.../delta/FLSUN/kossel/Configuration_adv.h | 24 ++++++----
.../FLSUN/kossel_mini/Configuration_adv.h | 24 ++++++----
.../Geeetech/Rostock 301/Configuration_adv.h | 24 ++++++----
.../delta/MKS/SBASE/Configuration_adv.h | 24 ++++++----
.../Tevo Little Monster/Configuration_adv.h | 24 ++++++----
.../delta/generic/Configuration_adv.h | 24 ++++++----
.../delta/kossel_mini/Configuration_adv.h | 24 ++++++----
.../delta/kossel_xl/Configuration_adv.h | 24 ++++++----
.../gCreate/gMax1.5+/Configuration_adv.h | 24 ++++++----
config/examples/makibox/Configuration_adv.h | 24 ++++++----
.../tvrrug/Round2/Configuration_adv.h | 24 ++++++----
config/examples/wt150/Configuration_adv.h | 24 ++++++----
100 files changed, 1509 insertions(+), 861 deletions(-)
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 716ba4f650..aa56f17b7b 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/Marlin/src/HAL/HAL_LPC1768/SanityCheck.h b/Marlin/src/HAL/HAL_LPC1768/SanityCheck.h
index 2338b34ee3..c0ba833f25 100644
--- a/Marlin/src/HAL/HAL_LPC1768/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_LPC1768/SanityCheck.h
@@ -69,11 +69,3 @@
#if IS_RE_ARM_BOARD && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
#error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 require TMC_USE_SW_SPI"
#endif
-
-#if 1 < (ENABLED(LPC_SD_CUSTOM_CABLE) + ENABLED(LPC_SD_LCD) + ENABLED(LPC_SD_ONBOARD))
- #error "Enable only one of LPC_SD_CUSTOM_CABLE, LPC_SD_LCD, or LPC_SD_ONBOARD."
-#endif
-
-#if 1 < (ENABLED(USB_SD_DISABLED) + ENABLED(USB_SD_ONBOARD))
- #error "Enable only one of USB_SD_DISABLED or USB_SD_ONBOARD."
-#endif
diff --git a/Marlin/src/HAL/HAL_LPC1768/main.cpp b/Marlin/src/HAL/HAL_LPC1768/main.cpp
index 258e150e29..86e7b5f996 100644
--- a/Marlin/src/HAL/HAL_LPC1768/main.cpp
+++ b/Marlin/src/HAL/HAL_LPC1768/main.cpp
@@ -81,8 +81,8 @@ void HAL_init() {
OUT_WRITE(SS_PIN, HIGH);
#endif
- #if defined(ONBOARD_SD_CS) && ONBOARD_SD_CS > -1
- OUT_WRITE(ONBOARD_SD_CS, HIGH);
+ #if PIN_EXISTS(ONBOARD_SD_CS) && ONBOARD_SD_CS_PIN != SS_PIN
+ OUT_WRITE(ONBOARD_SD_CS_PIN, HIGH);
#endif
USB_Init(); // USB Initialization
@@ -90,7 +90,7 @@ void HAL_init() {
delay(1000); // Give OS time to notice
USB_Connect(TRUE);
- #if DISABLED(USB_SD_DISABLED)
+ #if !BOTH(SHARED_SD_CARD, INIT_SDCARD_ON_BOOT) && DISABLED(NO_SD_HOST_DRIVE)
MSC_SD_Init(0); // Enable USB SD card access
#endif
@@ -117,7 +117,7 @@ void HAL_init() {
// HAL idle task
void HAL_idletask(void) {
- #if BOTH(SDSUPPORT, SHARED_SD_CARD)
+ #if ENABLED(SHARED_SD_CARD)
// If Marlin is using the SD card we need to lock it to prevent access from
// a PC via USB.
// Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but
diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp
index d94f0d183e..cc4ee1b705 100644
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@@ -1098,7 +1098,7 @@ void setup() {
init_closedloop();
#endif
- #if ENABLED(SDSUPPORT) && DISABLED(ULTRA_LCD)
+ #if ENABLED(INIT_SDCARD_ON_BOOT) && DISABLED(ULTRA_LCD)
card.beginautostart();
#endif
diff --git a/Marlin/src/core/drivers.h b/Marlin/src/core/drivers.h
index 9eca0a7168..597d3904e1 100644
--- a/Marlin/src/core/drivers.h
+++ b/Marlin/src/core/drivers.h
@@ -48,8 +48,8 @@
#define _TMC5160 5160
#define _TMC5160_STANDALONE 5161
-#define _ACTUAL(V) _CAT(_, V)
-#define _AXIS_DRIVER_TYPE(A,T) (defined(A##_DRIVER_TYPE) && _ACTUAL(A##_DRIVER_TYPE) == _CAT(_, T))
+#define _DRIVER_ID(V) _CAT(_, V)
+#define _AXIS_DRIVER_TYPE(A,T) (_DRIVER_ID(A##_DRIVER_TYPE) == _CAT(_, T))
#define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T)
#define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T)
@@ -116,3 +116,12 @@
|| AXIS_DRIVER_TYPE(A,TMC2209) \
|| AXIS_DRIVER_TYPE(A,TMC5130) \
|| AXIS_DRIVER_TYPE(A,TMC5160) )
+
+//
+// Stretching 'drivers.h' to include LPC SD options
+//
+#define _SDCARD_LCD 1
+#define _SDCARD_ONBOARD 2
+#define _SDCARD_CUSTOM_CABLE 3
+#define _SDCARD_ID(V) _CAT(_SDCARD_, V)
+#define SD_CONNECTION_IS(V) (_SDCARD_ID(SDCARD_CONNECTION) == _SDCARD_ID(V))
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index d5d0e89994..83d081d932 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -1727,3 +1727,18 @@
#define LCD_HEIGHT 2
#endif
#endif
+
+//
+// The external SD card is not used. Hardware SPI is used to access the card.
+// When sharing the SD card with a PC we want the menu options to
+// mount/unmount the card and refresh it. So we disable card detect.
+//
+#if ENABLED(SDSUPPORT)
+ #if SD_CONNECTION_IS(ONBOARD) && DISABLED(NO_SD_HOST_DRIVE)
+ #undef SD_DETECT_PIN
+ #define SHARED_SD_CARD
+ #endif
+ #if DISABLED(SHARED_SD_CARD)
+ #define INIT_SDCARD_ON_BOOT
+ #endif
+#endif
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 9fb9847658..a0a416e3e2 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -362,6 +362,12 @@
#error "MENU_ITEM_CASE_LIGHT is now CASE_LIGHT_MENU. Please update your configuration."
#elif defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
#error "ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED is now SD_ABORT_ON_ENDSTOP_HIT. Please update your Configuration_adv.h."
+#elif defined(LPC_SD_LCD) || defined(LPC_SD_ONBOARD) || defined(LPC_SD_CUSTOM_CABLE)
+ #error "LPC_SD_(LCD|ONBOARD|CUSTOM_CABLE) are now SDCARD_CONNECTION. Please update your Configuration_adv.h."
+#elif defined(USB_SD_DISABLED)
+ #error "USB_SD_DISABLED is now NO_SD_HOST_DRIVE. Please update your Configuration_adv.h."
+#elif defined(USB_SD_ONBOARD)
+ #error "USB_SD_ONBOARD is obsolete. Disable NO_SD_HOST_DRIVE instead."
#endif
#define BOARD_MKS_13 -47
diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp
index 998541cc23..fd99db7882 100644
--- a/Marlin/src/lcd/ultralcd.cpp
+++ b/Marlin/src/lcd/ultralcd.cpp
@@ -104,7 +104,7 @@
#endif
#endif
-#if ENABLED(SDSUPPORT)
+#if ENABLED(INIT_SDCARD_ON_BOOT)
uint8_t lcd_sd_status;
#endif
@@ -319,7 +319,9 @@ void MarlinUI::init() {
#if PIN_EXISTS(SD_DETECT)
SET_INPUT_PULLUP(SD_DETECT_PIN);
#endif
- lcd_sd_status = 2; // UNKNOWN
+ #if ENABLED(INIT_SDCARD_ON_BOOT)
+ lcd_sd_status = 2; // UNKNOWN
+ #endif
#endif
#if HAS_ENCODER_ACTION && HAS_SLOW_BUTTONS
@@ -770,7 +772,7 @@ void MarlinUI::update() {
#endif // HAS_LCD_MENU
- #if ENABLED(SDSUPPORT)
+ #if ENABLED(INIT_SDCARD_ON_BOOT)
const uint8_t sd_status = (uint8_t)IS_SD_INSERTED();
if (sd_status != lcd_sd_status && detected()) {
@@ -811,7 +813,7 @@ void MarlinUI::update() {
#endif
}
- #endif // SDSUPPORT
+ #endif // INIT_SDCARD_ON_BOOT
if (ELAPSED(ms, next_lcd_update_ms)
#if HAS_GRAPHICAL_LCD
diff --git a/Marlin/src/pins/pins_AZSMZ_MINI.h b/Marlin/src/pins/pins_AZSMZ_MINI.h
index c254f2e984..adb79e2dd1 100644
--- a/Marlin/src/pins/pins_AZSMZ_MINI.h
+++ b/Marlin/src/pins/pins_AZSMZ_MINI.h
@@ -86,7 +86,7 @@
#define FAN1_PIN P0_26
#define LCD_SDSS P0_16 // LCD SD chip select
-#define ONBOARD_SD_CS P0_06 // On board SD chip select
+#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if ENABLED(AZSMZ_12864)
#define BEEPER_PIN P1_30
@@ -95,28 +95,24 @@
#define BTN_EN1 P4_28
#define BTN_EN2 P1_27
#define BTN_ENC P3_26
- #if DISABLED(LPC_SD_ONBOARD)
- #define LPC_SD_LCD
+ #ifndef SDCARD_CONNECTION
+ #define SDCARD_CONNECTION LCD
#endif
#endif
-#if ENABLED(LPC_SD_LCD)
+#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
#define SS_PIN LCD_SDSS
#define SD_DETECT_PIN P3_25
-#elif ENABLED(LPC_SD_ONBOARD)
- #if ENABLED(USB_SD_ONBOARD)
- // When sharing the SD card with a PC we want the menu options to
- // mount/unmount the card and refresh it. So we disable card detect.
- #define SHARED_SD_CARD
- #undef SD_DETECT_PIN
- #endif
+#elif SD_CONNECTION_IS(ONBOARD)
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
- #define SS_PIN ONBOARD_SD_CS
+ #define SS_PIN ONBOARD_SD_CS_PIN
+#elif SD_CONNECTION_IS(CUSTOM_CABLE)
+ #error "No custom SD drive cable defined for this board."
#endif
//
diff --git a/Marlin/src/pins/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/pins_AZTEEG_X5_MINI.h
index 0f3e454371..8fed8279de 100644
--- a/Marlin/src/pins/pins_AZTEEG_X5_MINI.h
+++ b/Marlin/src/pins/pins_AZTEEG_X5_MINI.h
@@ -189,30 +189,23 @@
//
// SD Support
//
-#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
- #define LPC_SD_ONBOARD
+#ifndef SDCARD_CONNECTION
+ #define SDCARD_CONNECTION ONBOARD
#endif
-#if ENABLED(LPC_SD_LCD)
-
- #define SCK_PIN P0_15
- #define MISO_PIN P0_17
- #define MOSI_PIN P0_18
- #define SS_PIN P1_23 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
-#elif ENABLED(LPC_SD_ONBOARD)
-
- #if ENABLED(USB_SD_ONBOARD)
- // When sharing the SD card with a PC we want the menu options to
- // mount/unmount the card and refresh it. So we disable card detect.
- #define SHARED_SD_CARD
- #undef SD_DETECT_PIN // there is also no detect pin for the onboard card
- #endif
- #define SCK_PIN P0_07
- #define MISO_PIN P0_08
- #define MOSI_PIN P0_09
- #define SS_PIN P0_06 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
+#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
+
+#if SD_CONNECTION_IS(LCD)
+ #define SCK_PIN P0_15
+ #define MISO_PIN P0_17
+ #define MOSI_PIN P0_18
+ #define SS_PIN P1_23
+#elif SD_CONNECTION_IS(ONBOARD)
+ #undef SD_DETECT_PIN
+ #define SCK_PIN P0_07
+ #define MISO_PIN P0_08
+ #define MOSI_PIN P0_09
+ #define SS_PIN ONBOARD_SD_CS_PIN
+#elif SD_CONNECTION_IS(CUSTOM_CABLE)
+ #error "No custom SD drive cable defined for this board."
#endif
diff --git a/Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h b/Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
index 7509eddbba..751a7d1cac 100644
--- a/Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
+++ b/Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
@@ -255,42 +255,32 @@
// SD Support
//
-#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
- #undef USB_SD_DISABLED
- #define USB_SD_ONBOARD
- #define LPC_SD_LCD
+#ifndef SDCARD_CONNECTION
+ #define SDCARD_CONNECTION LCD
#endif
-#if ENABLED(LPC_SD_LCD)
+#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
+#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
- #define SS_PIN P0_16 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
-#elif ENABLED(LPC_SD_ONBOARD)
-
- #if ENABLED(USB_SD_ONBOARD)
- // When sharing the SD card with a PC we want the menu options to
- // mount/unmount the card and refresh it. So we disable card detect.
- #define SHARED_SD_CARD
- #undef SD_DETECT_PIN
- //#define SD_DETECT_PIN P0_27 // (57) open-drain
- #endif
-
+ #define SS_PIN P0_16
+#elif SD_CONNECTION_IS(ONBOARD)
+ #undef SD_DETECT_PIN
+ #define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
- #define SS_PIN P0_06 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
+ #define SS_PIN ONBOARD_SD_CS_PIN
+#elif SD_CONNECTION_IS(CUSTOM_CABLE)
+ #error "No custom SD drive cable defined for this board."
#endif
- /**
- * Special pins
- * P1_30 (37) (NOT 5V tolerant)
- * P1_31 (49) (NOT 5V tolerant)
- * P0_27 (57) (Open collector)
- * P0_28 (58) (Open collector)
- */
+/**
+ * Special pins
+ * P1_30 (37) (NOT 5V tolerant)
+ * P1_31 (49) (NOT 5V tolerant)
+ * P0_27 (57) (Open collector)
+ * P0_28 (58) (Open collector)
+ */
diff --git a/Marlin/src/pins/pins_BIQU_SKR_V1.1.h b/Marlin/src/pins/pins_BIQU_SKR_V1.1.h
index 17af3c4d04..de32e11efb 100644
--- a/Marlin/src/pins/pins_BIQU_SKR_V1.1.h
+++ b/Marlin/src/pins/pins_BIQU_SKR_V1.1.h
@@ -118,39 +118,30 @@
// MKS_MINI_12864 strongly prefers the SD card on the display and
// requires jumpers on the SKR V1.1 board as documented here:
// https://www.facebook.com/groups/505736576548648/permalink/630639874058317/
-#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
+#ifndef SDCARD_CONNECTION
#if ENABLED(MKS_MINI_12864)
- #define LPC_SD_LCD
- #undef USB_SD_DISABLED
- #define USB_SD_ONBOARD
+ #define SDCARD_CONNECTION LCD
#else
- #define USB_SD_ONBOARD
- #define LPC_SD_ONBOARD
+ #define SDCARD_CONNECTION ONBOARD
#endif
#endif
-#if ENABLED(LPC_SD_LCD)
+#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
+#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
- #define SS_PIN P1_23 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
-#elif ENABLED(LPC_SD_ONBOARD)
-
- #if ENABLED(USB_SD_ONBOARD)
- // When sharing the SD card with a PC we want the menu options to
- // mount/unmount the card and refresh it. So we disable card detect.
- #define SHARED_SD_CARD
- #undef SD_DETECT_PIN // there is also no detect pin for the onboard card
- #endif
+ #define SS_PIN P1_23
+#elif SD_CONNECTION_IS(ONBOARD)
+ #undef SD_DETECT_PIN
+ #define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
- #define SS_PIN P0_06 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
+ #define SS_PIN ONBOARD_SD_CS_PIN
+#elif SD_CONNECTION_IS(CUSTOM_CABLE)
+ #error "No custom SD drive cable defined for this board."
#endif
// Trinamic driver support
@@ -232,11 +223,11 @@
// EXAMPLES
// Example 1: No LCD attached or a TFT style display using the AUX header RX/TX pins.
- // LPC_SD_LCD must not be enabled. Nothing should be connected to EXP1/EXP2.
+ // SDCARD_CONNECTION must not be 'LCD'. Nothing should be connected to EXP1/EXP2.
//#define SKR_USE_LCD_PINS_FOR_CS
#if ENABLED(SKR_USE_LCD_PINS_FOR_CS)
- #if ENABLED(LPC_SD_LCD)
- #error "LPC_SD_LCD must not be enabled with SKR_USE_LCD_PINS_FOR_CS."
+ #if SD_CONNECTION_IS(LCD)
+ #error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_PINS_FOR_CS."
#endif
#define X_CS_PIN P1_23
#define Y_CS_PIN P3_26
@@ -247,11 +238,11 @@
// Example 2: A REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
// The SD card reader attached to the LCD (if present) can't be used because
- // the pins will be in use. So LPC_SD_LCD must not be defined.
+ // the pins will be in use. So SDCARD_CONNECTION must not be 'LCD'.
//#define SKR_USE_LCD_SD_CARD_PINS_FOR_CS
#if ENABLED(SKR_USE_LCD_SD_CARD_PINS_FOR_CS)
- #if ENABLED(LPC_SD_LCD)
- #error "LPC_SD_LCD must not be enabled with SKR_USE_LCD_SD_CARD_PINS_FOR_CS."
+ #if SD_CONNECTION_IS(LCD)
+ #error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_SD_CARD_PINS_FOR_CS."
#endif
#define X_CS_PIN P0_02
#define Y_CS_PIN P0_03
diff --git a/Marlin/src/pins/pins_COHESION3D_REMIX.h b/Marlin/src/pins/pins_COHESION3D_REMIX.h
index 29979792ef..942495c957 100644
--- a/Marlin/src/pins/pins_COHESION3D_REMIX.h
+++ b/Marlin/src/pins/pins_COHESION3D_REMIX.h
@@ -213,35 +213,25 @@
//
// SD Support
//
-#if NONE(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
- #undef USB_SD_DISABLED
- #define USB_SD_ONBOARD
- #define LPC_SD_ONBOARD
+#ifndef SDCARD_CONNECTION
+ #define SDCARD_CONNECTION ONBOARD
#endif
-#if ENABLED(LPC_SD_LCD)
+#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
+#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
-#elif ENABLED(LPC_SD_ONBOARD)
-
- #if ENABLED(USB_SD_ONBOARD)
- // When sharing the SD card with a PC the LCD menu options are
- // needed to mount/unmount and refresh SD. So disable SD detect.
- #define SHARED_SD_CARD
- #undef SD_DETECT_PIN // No SD detect pin for the onboard card
- #endif
-
+#elif SD_CONNECTION_IS(ONBOARD)
+ #undef SD_DETECT_PIN
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
- #define SS_PIN P0_06 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
+ #define SS_PIN ONBOARD_SD_CS_PIN
+#elif SD_CONNECTION_IS(CUSTOM_CABLE)
+ #error "No custom SD drive cable defined for this board."
#endif
//
diff --git a/Marlin/src/pins/pins_MKS_SBASE.h b/Marlin/src/pins/pins_MKS_SBASE.h
index f9fb944982..95347a05de 100644
--- a/Marlin/src/pins/pins_MKS_SBASE.h
+++ b/Marlin/src/pins/pins_MKS_SBASE.h
@@ -158,13 +158,13 @@
#define ENET_TXD0 P1_00 // J12-11
#define ENET_TXD1 P1_01 // J12-12
-#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
- #undef USB_SD_DISABLED
- #define USB_SD_ONBOARD
- #define LPC_SD_ONBOARD
+#ifndef SDARD_CONNECTION
+ #define SDCARD_CONNECTION ONBOARD
#endif
-#if ENABLED(LPC_SD_CUSTOM_CABLE)
+#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
+
+#if SD_CONNECTION_IS(CUSTOM_CABLE)
/**
* A custom cable is needed. See the README file in the
@@ -182,37 +182,23 @@
#define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7)
#define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8)
#define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.9)
- #define SS_PIN P0_28 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
+ #define SS_PIN P0_28
#define LPC_SOFTWARE_SPI // With a custom cable we need software SPI because the
// selected pins are not on a hardware SPI controller
-#elif ENABLED(LPC_SD_LCD)
-
+#elif SD_CONNECTION_IS(LCD)
// use standard cable and header, SPI and SD detect sre shared with on-board SD card
// hardware SPI is used for both SD cards. The detect pin is shred between the
// LCD and onboard SD readers so we disable it.
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
- #define SS_PIN P0_28 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
-#elif ENABLED(LPC_SD_ONBOARD)
-
- // The external SD card is not used. Hardware SPI is used to access the card.
- #if ENABLED(USB_SD_ONBOARD)
- // When sharing the SD card with a PC we want the menu options to
- // mount/unmount the card and refresh it. So we disable card detect.
- #define SHARED_SD_CARD
- #else
- #define SD_DETECT_PIN P0_27
- #endif
+ #define SS_PIN P0_28
+#elif SD_CONNECTION_IS(ONBOARD)
+ #define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
- #define SS_PIN P0_06 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
+ #define SS_PIN ONBOARD_SD_CS_PIN
#endif
/**
diff --git a/Marlin/src/pins/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/pins_RAMPS_RE_ARM.h
index 74296512eb..5de4f42db2 100644
--- a/Marlin/src/pins/pins_RAMPS_RE_ARM.h
+++ b/Marlin/src/pins/pins_RAMPS_RE_ARM.h
@@ -413,35 +413,25 @@
//
// SD Support
//
-#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
- #undef USB_SD_DISABLED
- #define USB_SD_ONBOARD
- #define LPC_SD_ONBOARD
+#ifndef SDCARD_CONNECTION
+ #define SDCARD_CONNECTION ONBOARD
#endif
-#if ENABLED(LPC_SD_LCD)
+#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
+#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
-#elif ENABLED(LPC_SD_ONBOARD)
-
- #if ENABLED(USB_SD_ONBOARD)
- // When sharing the SD card with a PC we want the menu options to
- // mount/unmount the card and refresh it. So we disable card detect.
- #define SHARED_SD_CARD
- #undef SD_DETECT_PIN // there is also no detect pin for the onboard card
- #endif
-
+#elif SD_CONNECTION_IS(ONBOARD)
+ #undef SD_DETECT_PIN
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
- #define SS_PIN P0_06 // Chip select for SD card used by Marlin
- #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
-
+ #define SS_PIN ONBOARD_SD_CS_PIN
+#elif SD_CONNECTION_IS(CUSTOM_CABLE)
+ #error "No custom SD drive cable defined for this board."
#endif
/**
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index f1892f3c50..c2822c362c 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 72380b32d5..f7160cf9f2 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index bc565dc31e..ac13c0219b 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 2a46411281..0929ccc12f 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 155e41dd48..684b68f24b 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 155e41dd48..684b68f24b 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 8c0bf1636c..b4fe3ceb85 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index fe44b80f5f..fc80e6e057 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 19f66cbd0f..0fd674104b 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index 6ec457121f..e942937aa9 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 281a9d7088..a9b9791774 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index dbc66acf16..54e749af5e 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -1038,19 +1038,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index b703f23148..fd7b86887c 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 4ab80f8b96..d05c689783 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index cafccf1a0c..83d009cff7 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 4d0710667a..64a52ea5e2 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -1042,19 +1042,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index cafccf1a0c..83d009cff7 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index 34b246e170..65679006f3 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index dbaa0b6c3d..c7c6a2182d 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index c0f7f8c36d..f33a9a6a44 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index 30731a844a..3251a34609 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index c8a3772e9f..8cf2183e9c 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index 6647872b28..c48a86e460 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index 40d2e65b81..efcce34f80 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index 342c500a6b..e31c93a300 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index ed6cb1515e..c2f441b051 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index 7bf9798be0..74b664ac4d 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
index 8fde577ec1..85eb03fc85 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index 2670e9736b..fe93898804 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index 344b059218..1c38715252 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index adf61951b2..3a578cb176 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -1033,19 +1033,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 01ac0bf3bf..a8ee6c67ed 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index 99db3b2db5..32f1df5f10 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index a9d025df7a..a8d6fbb407 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -1038,19 +1038,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 93a103bed1..7a16b66ec7 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -1038,19 +1038,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Fysetc/AIO_II/Configuration_adv.h b/config/examples/Fysetc/AIO_II/Configuration_adv.h
index 7103fdc04e..9f3defe54c 100644
--- a/config/examples/Fysetc/AIO_II/Configuration_adv.h
+++ b/config/examples/Fysetc/AIO_II/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Fysetc/CHEETAH/Configuration_adv.h b/config/examples/Fysetc/CHEETAH/Configuration_adv.h
index 6210a14277..a187c47082 100644
--- a/config/examples/Fysetc/CHEETAH/Configuration_adv.h
+++ b/config/examples/Fysetc/CHEETAH/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Fysetc/F6_13/Configuration_adv.h b/config/examples/Fysetc/F6_13/Configuration_adv.h
index eb18c9cd8c..5571e15032 100644
--- a/config/examples/Fysetc/F6_13/Configuration_adv.h
+++ b/config/examples/Fysetc/F6_13/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index 0ccb43ca2b..c95a9dee66 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index 78f1411c56..3dbfaaf82a 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index 1bb275a2f2..6852646e48 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 57a8897e9d..c870589b12 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 0ccb43ca2b..c95a9dee66 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 0ccb43ca2b..c95a9dee66 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 18ab138d92..268b48baf7 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index c113548d4b..4acf12cecb 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -1039,19 +1039,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index f6c697d6fe..d84722e23a 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index c113548d4b..4acf12cecb 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -1039,19 +1039,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index e7bfc3c164..f97cee78e8 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index dbe88b94e4..c647cd85e1 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 7692827c70..18c50765a6 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index bea5b7798c..bc6e4e9a49 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index a5b5a87712..cb1defe2f0 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 09c7e6625c..f61f1bb3a3 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1035,19 +1035,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index f412615be2..99ed1a3ca1 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 401a7f1aaa..25e7330f0e 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index 50b26ed515..2a702f72e3 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index 7fadd1cff0..dbb94b1b08 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index 04351fdaa2..50362bf90e 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
index d78f7453dd..3eeab3cf75 100755
--- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
+++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
@@ -1030,19 +1030,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index b2d6c9347d..ca808df6fc 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 18280332ae..7cf8279b3a 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 827c92a2ee..13c460d390 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index ab8be01ce7..3718653047 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 9b99def3af..c546ace683 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index a252e88b85..b84f5a683e 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 09243e60f0..c0f176b715 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index b68982f7c8..6fc5ddb05c 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1047,19 +1047,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index 526cd3f410..0dd15eba5b 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 3a4f9799b4..076d414b0f 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index aa8d7f6d16..7cf325e7a1 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index 94d2d546d1..eb642a461d 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index e7380c74de..39d058b42a 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index e7380c74de..39d058b42a 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 8ac8314853..ac973331a7 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 8ac8314853..ac973331a7 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
@@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 7281e9dc4e..23920189c5 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 3360001e5f..b82e030c92 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
@@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index 8ac8314853..ac973331a7 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index 8ac8314853..ac973331a7 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index 0a33b9b7b7..0fed27ebbe 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -1036,19 +1036,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 8a50fabd21..dcc5db36e0 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 80f9796667..80736e4f43 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index c9eacd15fd..2d28dba030 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1034,19 +1034,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index 94226c2c95..c31dc58b54 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -1035,19 +1035,27 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
- // LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
- //#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
- //#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
- //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
- //#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
- #if ENABLED(LPC_SD_ONBOARD)
- //#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
- #endif
+ /**
+ * Set this option to one of the following (or the board's defaults apply):
+ *
+ * LCD - Use the SD drive in the external LCD controller.
+ * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+ * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+ *
+ * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+ */
+ //#define SDCARD_CONNECTION LCD
#endif
#endif // SDSUPPORT
+/**
+ * By default an onboard SD card reader will be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
+
/**
* Additional options for Graphical Displays
*
--
GitLab