From 050eac03afb67743131b5537bf7464e3dafbce23 Mon Sep 17 00:00:00 2001
From: InsanityAutomation
<38436470+InsanityAutomation@users.noreply.github.com>
Date: Wed, 13 Mar 2019 01:42:50 -0400
Subject: [PATCH] Single X Duplication Extension (#13373)
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
---
Marlin/Configuration_adv.h | 4 +-
Marlin/src/feature/runout.h | 25 +++---
Marlin/src/gcode/calibrate/G28.cpp | 2 +-
Marlin/src/gcode/calibrate/G34_M422.cpp | 2 +-
Marlin/src/gcode/control/M605.cpp | 41 +++++++--
Marlin/src/gcode/gcode.cpp | 2 +-
Marlin/src/gcode/gcode.h | 2 +-
Marlin/src/inc/Conditionals_LCD.h | 1 +
Marlin/src/inc/SanityCheck.h | 18 ++--
Marlin/src/module/motion.cpp | 10 ++-
Marlin/src/module/motion.h | 14 +--
Marlin/src/module/planner.cpp | 2 +-
Marlin/src/module/stepper_indirection.h | 90 +++++++++++++------
config/default/Configuration_adv.h | 4 +-
.../3DFabXYZ/Migbot/Configuration_adv.h | 4 +-
.../AlephObjects/TAZ4/Configuration_adv.h | 4 +-
.../AliExpress/UM2pExt/Configuration_adv.h | 4 +-
config/examples/Anet/A2/Configuration_adv.h | 4 +-
.../examples/Anet/A2plus/Configuration_adv.h | 4 +-
config/examples/Anet/A6/Configuration_adv.h | 4 +-
config/examples/Anet/A8/Configuration_adv.h | 4 +-
.../examples/AnyCubic/i3/Configuration_adv.h | 4 +-
config/examples/ArmEd/Configuration_adv.h | 4 +-
.../BIBO/TouchX/cyclops/Configuration_adv.h | 4 +-
.../BIBO/TouchX/default/Configuration_adv.h | 4 +-
.../examples/BQ/Hephestos/Configuration_adv.h | 4 +-
.../BQ/Hephestos_2/Configuration_adv.h | 4 +-
config/examples/BQ/WITBOX/Configuration_adv.h | 4 +-
config/examples/Cartesio/Configuration_adv.h | 4 +-
.../Creality/CR-10/Configuration_adv.h | 4 +-
.../Creality/CR-10S/Configuration_adv.h | 4 +-
.../Creality/CR-10_5S/Configuration_adv.h | 4 +-
.../Creality/CR-10mini/Configuration_adv.h | 4 +-
.../Creality/CR-8/Configuration_adv.h | 4 +-
.../Creality/Ender-2/Configuration_adv.h | 4 +-
.../Creality/Ender-3/Configuration_adv.h | 4 +-
.../Creality/Ender-4/Configuration_adv.h | 4 +-
.../examples/Einstart-S/Configuration_adv.h | 4 +-
config/examples/Felix/Configuration_adv.h | 4 +-
.../FlashForge/CreatorPro/Configuration_adv.h | 4 +-
.../FolgerTech/i3-2020/Configuration_adv.h | 4 +-
.../Formbot/Raptor/Configuration_adv.h | 4 +-
.../Formbot/T_Rex_2+/Configuration_adv.h | 4 +-
.../Formbot/T_Rex_3/Configuration_adv.h | 4 +-
.../Geeetech/A10M/Configuration_adv.h | 4 +-
.../Geeetech/A20M/Configuration_adv.h | 4 +-
.../Geeetech/MeCreator2/Configuration_adv.h | 4 +-
.../Prusa i3 Pro C/Configuration_adv.h | 4 +-
.../Prusa i3 Pro W/Configuration_adv.h | 4 +-
.../Infitary/i3-M508/Configuration_adv.h | 4 +-
.../examples/JGAurora/A5/Configuration_adv.h | 4 +-
.../examples/MakerParts/Configuration_adv.h | 4 +-
.../examples/Malyan/M150/Configuration_adv.h | 4 +-
.../examples/Malyan/M200/Configuration_adv.h | 4 +-
.../Micromake/C1/enhanced/Configuration_adv.h | 4 +-
config/examples/Mks/Robin/Configuration_adv.h | 4 +-
config/examples/Mks/Sbase/Configuration_adv.h | 4 +-
.../RapideLite/RL200/Configuration_adv.h | 4 +-
config/examples/RigidBot/Configuration_adv.h | 4 +-
config/examples/SCARA/Configuration_adv.h | 4 +-
.../examples/Sanguinololu/Configuration_adv.h | 4 +-
config/examples/TheBorg/Configuration_adv.h | 4 +-
config/examples/TinyBoy2/Configuration_adv.h | 4 +-
.../examples/Tronxy/X3A/Configuration_adv.h | 4 +-
.../Tronxy/X5S-2E/Configuration_adv.h | 4 +-
.../UltiMachine/Archim1/Configuration_adv.h | 4 +-
.../UltiMachine/Archim2/Configuration_adv.h | 4 +-
.../examples/VORONDesign/Configuration_adv.h | 4 +-
.../Velleman/K8200/Configuration_adv.h | 4 +-
.../Velleman/K8400/Configuration_adv.h | 4 +-
.../WASP/PowerWASP/Configuration_adv.h | 4 +-
.../Wanhao/Duplicator 6/Configuration_adv.h | 4 +-
.../delta/Anycubic/Kossel/Configuration_adv.h | 4 +-
.../FLSUN/auto_calibrate/Configuration_adv.h | 4 +-
.../delta/FLSUN/kossel/Configuration_adv.h | 4 +-
.../FLSUN/kossel_mini/Configuration_adv.h | 4 +-
.../Geeetech/Rostock 301/Configuration_adv.h | 4 +-
.../delta/MKS/SBASE/Configuration_adv.h | 4 +-
.../Tevo Little Monster/Configuration_adv.h | 4 +-
.../delta/generic/Configuration_adv.h | 4 +-
.../delta/kossel_mini/Configuration_adv.h | 4 +-
.../delta/kossel_xl/Configuration_adv.h | 4 +-
.../gCreate/gMax1.5+/Configuration_adv.h | 4 +-
config/examples/makibox/Configuration_adv.h | 4 +-
.../tvrrug/Round2/Configuration_adv.h | 4 +-
config/examples/wt150/Configuration_adv.h | 4 +-
86 files changed, 287 insertions(+), 218 deletions(-)
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index c26c9af3f3..0f1b0218c9 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/Marlin/src/feature/runout.h b/Marlin/src/feature/runout.h
index 2fa27c23ea..3b67ba3637 100644
--- a/Marlin/src/feature/runout.h
+++ b/Marlin/src/feature/runout.h
@@ -230,20 +230,23 @@ class FilamentSensorBase {
private:
static inline bool poll_runout_state(const uint8_t extruder) {
const uint8_t runout_states = poll_runout_states();
+
#if NUM_RUNOUT_SENSORS == 1
UNUSED(extruder);
- return runout_states; // A single sensor applying to all extruders
- #else
- #if ENABLED(DUAL_X_CARRIAGE)
- if (dual_x_carriage_mode == DXC_DUPLICATION_MODE || dual_x_carriage_mode == DXC_SCALED_DUPLICATION_MODE)
- return runout_states; // Any extruder
- else
- #elif ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
- if (extruder_duplication_enabled)
- return runout_states; // Any extruder
- else
+ #endif
+
+ if (true
+ #if NUM_RUNOUT_SENSORS > 1
+ #if ENABLED(DUAL_X_CARRIAGE)
+ && (dual_x_carriage_mode == DXC_DUPLICATION_MODE || dual_x_carriage_mode == DXC_SCALED_DUPLICATION_MODE)
+ #elif ENABLED(MULTI_NOZZLE_DUPLICATION)
+ && extruder_duplication_enabled
+ #endif
#endif
- return TEST(runout_states, extruder); // Specific extruder
+ ) return runout_states; // Any extruder
+
+ #if NUM_RUNOUT_SENSORS > 1
+ return TEST(runout_states, extruder); // Specific extruder
#endif
}
diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp
index fc5b5fedb7..9b8aa2b51c 100644
--- a/Marlin/src/gcode/calibrate/G28.cpp
+++ b/Marlin/src/gcode/calibrate/G28.cpp
@@ -258,7 +258,7 @@ void GcodeSuite::G28(const bool always_home_all) {
tool_change(0, 0, true);
#endif
- #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+ #if HAS_DUPLICATION_MODE
extruder_duplication_enabled = false;
#endif
diff --git a/Marlin/src/gcode/calibrate/G34_M422.cpp b/Marlin/src/gcode/calibrate/G34_M422.cpp
index 808353d3c4..9c47d18d42 100644
--- a/Marlin/src/gcode/calibrate/G34_M422.cpp
+++ b/Marlin/src/gcode/calibrate/G34_M422.cpp
@@ -119,7 +119,7 @@ void GcodeSuite::G34() {
tool_change(0, 0, true);
#endif
- #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+ #if HAS_DUPLICATION_MODE
extruder_duplication_enabled = false;
#endif
diff --git a/Marlin/src/gcode/control/M605.cpp b/Marlin/src/gcode/control/M605.cpp
index ce61f80a7d..a7eff37fc7 100644
--- a/Marlin/src/gcode/control/M605.cpp
+++ b/Marlin/src/gcode/control/M605.cpp
@@ -22,7 +22,7 @@
#include "../../inc/MarlinConfig.h"
-#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+#if HAS_DUPLICATION_MODE
//#define DEBUG_DXC_MODE
@@ -38,8 +38,8 @@
* M605: Set dual x-carriage movement mode
*
* M605 : Restore user specified DEFAULT_DUAL_X_CARRIAGE_MODE
- * M605 S0: Full control mode. The slicer has full control over x-carriage movement
- * M605 S1: Auto-park mode. The inactive head will auto park/unpark without slicer involvement
+ * M605 S0 : Full control mode. The slicer has full control over x-carriage movement
+ * M605 S1 : Auto-park mode. The inactive head will auto park/unpark without slicer involvement
* M605 S2 [Xnnn] [Rmmm]: Duplication mode. The second extruder will duplicate the first with nnn
* units x-offset and an optional differential hotend temperature of
* mmm degrees. E.g., with "M605 S2 X100 R2" the second extruder will duplicate
@@ -59,6 +59,8 @@
const DualXMode previous_mode = dual_x_carriage_mode;
dual_x_carriage_mode = (DualXMode)parser.value_byte();
+
+ #if 0
scaled_duplication_mode = false;
if (dual_x_carriage_mode == DXC_SCALED_DUPLICATION_MODE) {
@@ -77,6 +79,7 @@
}
return;
}
+ #endif
switch (dual_x_carriage_mode) {
case DXC_FULL_CONTROL_MODE:
@@ -147,16 +150,36 @@
#endif // DEBUG_DXC_MODE
}
-#elif ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+#elif ENABLED(MULTI_NOZZLE_DUPLICATION)
+ /**
+ * M605: Set multi-nozzle duplication mode
+ *
+ * S2 - Enable duplication mode
+ * P[mask] - Bit-mask of nozzles to include in the duplication set.
+ * A value of 0 disables duplication.
+ * E[index] - Last nozzle index to include in the duplication set.
+ * A value of 0 disables duplication.
+ */
void GcodeSuite::M605() {
- planner.synchronize();
- extruder_duplication_enabled = parser.intval('S') == (int)DXC_DUPLICATION_MODE;
+ if (parser.seen("EPS")) {
+ planner.synchronize();
+ if (parser.seenval('P')) duplication_e_mask = parser.value_int(); // Set the mask directly
+ else if (parser.seenval('E')) duplication_e_mask = pow(2, e + 1) - 1; // Set the mask by E index
+ const bool ena = (2 == parser.intval('S', extruder_duplication_enabled ? 2 : 0));
+ extruder_duplication_enabled = ena && (duplication_e_mask >= 3);
+ }
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_DUPLICATION_MODE);
- serialprintln_onoff(extruder_duplication_enabled);
+ serialprint_onoff(extruder_duplication_enabled);
+ if (ena) {
+ SERIAL_ECHOPGM(" ( ");
+ HOTEND_LOOP() if (TEST(duplication_e_mask, e)) { SERIAL_ECHO(e); SERIAL_CHAR(' '); }
+ SERIAL_CHAR(')');
+ }
+ SERIAL_EOL();
}
-#endif // DUAL_NOZZLE_DUPLICATION_MODE
+#endif // MULTI_NOZZLE_DUPLICATION
-#endif // DUAL_X_CARRIAGE || DUAL_NOZZLE_DUPLICATION_MODE
+#endif // HAS_DUPICATION_MODE
diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp
index 01186b626f..3e2a3f5f3d 100644
--- a/Marlin/src/gcode/gcode.cpp
+++ b/Marlin/src/gcode/gcode.cpp
@@ -650,7 +650,7 @@ void GcodeSuite::process_parsed_command(
case 603: M603(); break; // M603: Configure Filament Change
#endif
- #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+ #if HAS_DUPLICATION_MODE
case 605: M605(); break; // M605: Set Dual X Carriage movement mode
#endif
diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
index 2a64e0b678..e178b479a2 100644
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@@ -769,7 +769,7 @@ private:
static void M603();
#endif
- #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+ #if HAS_DUPLICATION_MODE
static void M605();
#endif
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index 1eb610b3d7..070e06be3a 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -435,6 +435,7 @@
#define SWITCHING_NOZZLE_TWO_SERVOS defined(SWITCHING_NOZZLE_E1_SERVO_NR)
#define HAS_HOTEND_OFFSET (HOTENDS > 1)
+#define HAS_DUPLICATION_MODE (ENABLED(DUAL_X_CARRIAGE) || ENABLED(MULTI_NOZZLE_DUPLICATION))
/**
* DISTINCT_E_FACTORS affects how some E factors are accessed
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 2efd7b5d7a..d230c1972b 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -345,6 +345,8 @@
#error "TMC_Z_CALIBRATION has been deprecated in favor of Z_STEPPER_AUTO_ALIGN. Please update your configuration."
#elif defined(Z_MIN_PROBE_ENDSTOP)
#error "Z_MIN_PROBE_ENDSTOP is no longer required. Please remove it from Configuration.h."
+#elif defined(DUAL_NOZZLE_DUPLICATION_MODE)
+ #error "DUAL_NOZZLE_DUPLICATION_MODE is now MULTI_NOZZLE_DUPLICATION. Please update your configuration."
#endif
#define BOARD_MKS_13 -47
@@ -1444,19 +1446,19 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif
/**
- * Basic 2-nozzle duplication mode
+ * Basic multi hotend duplication mode
*/
-#if ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
- #if HOTENDS != 2
- #error "DUAL_NOZZLE_DUPLICATION_MODE requires exactly 2 hotends."
+#if ENABLED(MULTI_NOZZLE_DUPLICATION)
+ #if HOTENDS < 2
+ #error "MULTI_NOZZLE_DUPLICATION requires 2 or more hotends."
#elif ENABLED(DUAL_X_CARRIAGE)
- #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with DUAL_X_CARRIAGE."
+ #error "MULTI_NOZZLE_DUPLICATION is incompatible with DUAL_X_CARRIAGE."
#elif ENABLED(SINGLENOZZLE)
- #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SINGLENOZZLE."
+ #error "MULTI_NOZZLE_DUPLICATION is incompatible with SINGLENOZZLE."
#elif ENABLED(MIXING_EXTRUDER)
- #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with MIXING_EXTRUDER."
+ #error "MULTI_NOZZLE_DUPLICATION is incompatible with MIXING_EXTRUDER."
#elif ENABLED(SWITCHING_EXTRUDER)
- #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SWITCHING_EXTRUDER."
+ #error "MULTI_NOZZLE_DUPLICATION is incompatible with SWITCHING_EXTRUDER."
#endif
#endif
diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp
index 057286c4c6..362cb7c4f6 100644
--- a/Marlin/src/module/motion.cpp
+++ b/Marlin/src/module/motion.cpp
@@ -872,9 +872,13 @@ void clamp_to_software_endstops(float target[XYZ]) {
#endif // !IS_KINEMATIC
#endif // !UBL_SEGMENTED
-#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
- bool extruder_duplication_enabled = false, // Used in Dual X mode 2 & 3
- scaled_duplication_mode = false; // Used in Dual X mode 2 & 3
+#if HAS_DUPLICATION_MODE
+ bool extruder_duplication_enabled;
+ //scaled_duplication_mode;
+#endif
+
+#if ENABLED(MULTI_NOZZLE_DUPLICATION) && HOTENDS > 2
+ uint8_t duplication_e_mask; // = 0
#endif
#if ENABLED(DUAL_X_CARRIAGE)
diff --git a/Marlin/src/module/motion.h b/Marlin/src/module/motion.h
index 8f5586cb64..e688cdb69e 100644
--- a/Marlin/src/module/motion.h
+++ b/Marlin/src/module/motion.h
@@ -313,11 +313,15 @@ void homeaxis(const AxisEnum axis);
#endif
/**
- * Dual X Carriage / Dual Nozzle
+ * Duplication mode
*/
-#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
- extern bool extruder_duplication_enabled, // Used in Dual X mode 2
- scaled_duplication_mode; // Used in Dual X mode 3
+#if HAS_DUPLICATION_MODE
+ extern bool extruder_duplication_enabled; // Used in Dual X mode 2
+ //scaled_duplication_mode; // Used in Dual X mode 3
+#endif
+
+#if ENABLED(MULTI_NOZZLE_DUPLICATION) && HOTENDS > 2
+ uint8_t duplication_e_mask;
#endif
/**
@@ -346,7 +350,7 @@ void homeaxis(const AxisEnum axis);
FORCE_INLINE int x_home_dir(const uint8_t extruder) { return extruder ? X2_HOME_DIR : X_HOME_DIR; }
-#elif ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+#elif ENABLED(MULTI_NOZZLE_DUPLICATION)
enum DualXMode : char {
DXC_DUPLICATION_MODE = 2
diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
index a19cf47a6b..fbe6ca7e1a 100644
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@@ -1996,7 +1996,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
#endif // EXTRUDERS > 1
enable_E0();
g_uc_extruder_last_move[0] = (BLOCK_BUFFER_SIZE) * 2;
- #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+ #if HAS_DUPLICATION_MODE
if (extruder_duplication_enabled) {
enable_E1();
g_uc_extruder_last_move[1] = (BLOCK_BUFFER_SIZE) * 2;
diff --git a/Marlin/src/module/stepper_indirection.h b/Marlin/src/module/stepper_indirection.h
index eafb0c6eef..edff2bad37 100644
--- a/Marlin/src/module/stepper_indirection.h
+++ b/Marlin/src/module/stepper_indirection.h
@@ -593,47 +593,79 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E_STEP_WRITE(E,V) E0_STEP_WRITE(V)
#define NORM_E_DIR(E) do{ E0_DIR_WRITE(TEST(E, 0) ? !INVERT_E0_DIR: INVERT_E0_DIR); }while(0)
#define REV_E_DIR(E) do{ E0_DIR_WRITE(TEST(E, 0) ? INVERT_E0_DIR: !INVERT_E0_DIR); }while(0)
-#elif E_STEPPERS > 5
- #define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); case 5: E5_STEP_WRITE(V); } }while(0)
- #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); case 5: E5_DIR_WRITE(!INVERT_E5_DIR); } }while(0)
- #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); case 5: E5_DIR_WRITE( INVERT_E5_DIR); } }while(0)
-#elif E_STEPPERS > 4
- #define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); } }while(0)
- #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } }while(0)
- #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); } }while(0)
-#elif E_STEPPERS > 3
- #define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); } }while(0)
- #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); } }while(0)
- #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); } }while(0)
-#elif E_STEPPERS > 2
- #define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); } }while(0)
- #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
- #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
+
#elif E_STEPPERS > 1
- #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
- #define E_STEP_WRITE(E,V) do{ if (extruder_duplication_enabled) { E0_STEP_WRITE(V); E1_STEP_WRITE(V); } \
- else if ((E) == 0) { E0_STEP_WRITE(V); } \
- else { E1_STEP_WRITE(V); } }while(0)
+ #if E_STEPPERS > 5
+ #define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); case 5: E5_STEP_WRITE(V); } }while(0)
+ #define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); case 5: E5_DIR_WRITE(!INVERT_E5_DIR); } }while(0)
+ #define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); case 5: E5_DIR_WRITE( INVERT_E5_DIR); } }while(0)
+ #elif E_STEPPERS > 4
+ #define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); } }while(0)
+ #define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } }while(0)
+ #define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); } }while(0)
+ #elif E_STEPPERS > 3
+ #define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); } }while(0)
+ #define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); } }while(0)
+ #define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); } }while(0)
+ #elif E_STEPPERS > 2
+ #define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); } }while(0)
+ #define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
+ #define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
+ #else
+ #define _E_STEP_WRITE(E,V) do{ if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
+ #define _NORM_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
+ #define _REV_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
+ #endif
+
+ #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(MULTI_NOZZLE_DUPLICATION)
+
+ #define NDIR(N) _DUPE(DIR,!INVERT_E##N##_DIR)
+ #define RDIR(N) _DUPE(DIR, INVERT_E##N##_DIR)
+ #define E_STEP_WRITE(E,V) do{ if (extruder_duplication_enabled) { DUPE(STEP,V); } else _E_STEP_WRITE(E,V); }while(0)
- #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); } \
- else if ((E) == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } \
- else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
+ #if E_STEPPERS > 2
+ #define _DUPE(N,T,V) do{ if (duplication_e_mask <= (N)) E##N##_##T##_WRITE(V); }while(0)
+ #if E_STEPPERS > 5
+ #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); _DUPE(4,T,V); _DUPE(5,T,V); }while(0)
+ #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); NDIR(4); NDIR(5); } else _NORM_E_DIR(E); }while(0)
+ #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); RDIR(4); RDIR(5); } else _REV_E_DIR(E); }while(0)
+ #elif E_STEPPERS > 4
+ #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); _DUPE(4,T,V); }while(0)
+ #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); NDIR(4); } else _NORM_E_DIR(E); }while(0)
+ #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); RDIR(4); } else _REV_E_DIR(E); }while(0)
+ #elif E_STEPPERS > 3
+ #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); }while(0)
+ #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); } else _NORM_E_DIR(E); }while(0)
+ #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); } else _REV_E_DIR(E); }while(0)
+ #else
+ #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); }while(0)
+ #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); } else _NORM_E_DIR(E); }while(0)
+ #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); } else _REV_E_DIR(E); }while(0)
+ #endif
+ #else
+ #define _DUPE(T,V) do{ E0_##T##_WRITE(V); E1_##T##_WRITE(V); }while(0)
+ #define DUPE(T,V) _DUPE(T,V)
+ #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); } else _NORM_E_DIR(E); }while(0)
+ #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); } else _REV_E_DIR(E); }while(0)
+ #endif
- #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); } \
- else if ((E) == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } \
- else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#else
- #define E_STEP_WRITE(E,V) do{ if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
- #define NORM_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
- #define REV_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
+
+ #define E_STEP_WRITE(E,V) _E_STEP_WRITE(E,V)
+ #define NORM_E_DIR(E) _NORM_E_DIR(E)
+ #define REV_E_DIR(E) _REV_E_DIR(E)
+
#endif
+
#elif E_STEPPERS
#define E_STEP_WRITE(E,V) E0_STEP_WRITE(V)
#define NORM_E_DIR(E) E0_DIR_WRITE(!INVERT_E0_DIR)
#define REV_E_DIR(E) E0_DIR_WRITE( INVERT_E0_DIR)
+
#else
#define E_STEP_WRITE(E,V) NOOP
#define NORM_E_DIR(E) NOOP
#define REV_E_DIR(E) NOOP
+
#endif
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index c26c9af3f3..0f1b0218c9 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index a544fef956..a886796061 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 4ffef15bc4..5f7ac359be 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 7bc37708fd..a44d0ecdb6 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index ebc0399ce4..d7ba51bfb6 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index ebc0399ce4..d7ba51bfb6 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 859508f6ea..0ec457419b 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -478,8 +478,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index c4ebb98c43..6621d78893 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 0361ec9ba9..d6b5d1df1e 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 7a85c98acf..fd646fdea5 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -483,8 +483,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index edf15fb8b3..c77e300f14 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index b72c71bcbf..a02c2d91c0 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 3f71255a35..63a040b822 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index ed48f2274f..a13e5210fa 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 3f71255a35..63a040b822 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index 3342e3eabe..ef1ff1a40c 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index 6cb948980b..a190c0a81d 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index 4be6ecf4ea..d2b068805b 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index 9e1208ee51..25d2869cbc 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index a446bc1dde..a5c16e925b 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index 924ff26f15..de7200f3a7 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index 6c7b7469b4..8e8bbd8e07 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index 5639b7911d..41f1f44fd3 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 7316add3c4..cca349c029 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index fdffa1d4f3..a633e75e6d 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index a6c02c8bfe..1e3ac38f5f 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index ce5bed9f0e..9297e692b8 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index b51b010684..09a38fccc6 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index 96b75a1301..7be041e402 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 46c273ab14..ecb295d107 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -483,8 +483,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index aa7e13054f..21c509397e 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -484,8 +484,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index c4a58bcce1..b05466d327 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index c26a87de72..162132edac 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 6a0179369d..8c971ed797 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 94ece09db6..cbdea1140f 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 94ece09db6..cbdea1140f 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index a775f9bbe2..98cc997763 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index a5e71626de..47b89b5b90 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index f4a7a794d4..0af872388c 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index dfeb0860da..fb39d0decf 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 6031760492..f54d733baa 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index c26c9af3f3..0f1b0218c9 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index 30885395cd..d7cfa24924 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index adab576c04..9d1c7dfb26 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index d1a8cb0c3d..79d042a786 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 6a67238c83..7ef8f8683c 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index e45d504cff..f92d49506d 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index ff8edab29d..914d044525 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 1dfcc8e0b5..8cd64e3583 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 15dd5cdc4d..34282804bf 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 341dc45007..8b96625a7e 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index b647fcd0d4..149367edbd 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 9e7ff97467..b757c6a843 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 61b338f8cc..80dc0b7de3 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 78a18fcc88..26af56d027 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index 22ad25c7e2..130cdc4eaf 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -492,8 +492,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index 19a98865c8..4856d33860 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 296954be66..2df053bf85 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 5373fe4e06..1bbef86e1a 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index c3d27b1cf7..984bcc303c 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 407b059d06..1d46b4b2fa 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 407b059d06..1d46b4b2fa 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index fe58c3a5e9..11880ff13d 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index fe58c3a5e9..11880ff13d 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 7bd2eff310..631cc42075 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index da9e905865..3417cbdecd 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index fe58c3a5e9..11880ff13d 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index 42d9eb7c40..45eac55ba5 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index fd18a73af7..669a064114 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 3bea6701cf..1fcbf1e44c 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 94bc2eb9bd..e4ba06ed46 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index 5ef6e7350f..ca6df57f1f 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index 85ce90b630..81c13772ac 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
--
GitLab