diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index c26c9af3f3ce79de85e35b5361537cea3e5e697b..0f1b0218c968672fb0be68524ee82569a1a7e5aa 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/Marlin/src/feature/runout.h b/Marlin/src/feature/runout.h
index 2fa27c23ea6d548be4c1b212532f100dc52c9bf1..3b67ba3637c190afec9da94c2b6fcaf868a18210 100644
--- a/Marlin/src/feature/runout.h
+++ b/Marlin/src/feature/runout.h
@@ -230,20 +230,23 @@ class FilamentSensorBase {
private:
static inline bool poll_runout_state(const uint8_t extruder) {
const uint8_t runout_states = poll_runout_states();
+
#if NUM_RUNOUT_SENSORS == 1
UNUSED(extruder);
- return runout_states; // A single sensor applying to all extruders
- #else
- #if ENABLED(DUAL_X_CARRIAGE)
- if (dual_x_carriage_mode == DXC_DUPLICATION_MODE || dual_x_carriage_mode == DXC_SCALED_DUPLICATION_MODE)
- return runout_states; // Any extruder
- else
- #elif ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
- if (extruder_duplication_enabled)
- return runout_states; // Any extruder
- else
+ #endif
+
+ if (true
+ #if NUM_RUNOUT_SENSORS > 1
+ #if ENABLED(DUAL_X_CARRIAGE)
+ && (dual_x_carriage_mode == DXC_DUPLICATION_MODE || dual_x_carriage_mode == DXC_SCALED_DUPLICATION_MODE)
+ #elif ENABLED(MULTI_NOZZLE_DUPLICATION)
+ && extruder_duplication_enabled
+ #endif
#endif
- return TEST(runout_states, extruder); // Specific extruder
+ ) return runout_states; // Any extruder
+
+ #if NUM_RUNOUT_SENSORS > 1
+ return TEST(runout_states, extruder); // Specific extruder
#endif
}
diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp
index fc5b5fedb7b1280c26a0e3bcedc99f532a79ffaa..9b8aa2b51c79d05b55d3e42a2c705f0469a12e9b 100644
--- a/Marlin/src/gcode/calibrate/G28.cpp
+++ b/Marlin/src/gcode/calibrate/G28.cpp
@@ -258,7 +258,7 @@ void GcodeSuite::G28(const bool always_home_all) {
tool_change(0, 0, true);
#endif
- #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+ #if HAS_DUPLICATION_MODE
extruder_duplication_enabled = false;
#endif
diff --git a/Marlin/src/gcode/calibrate/G34_M422.cpp b/Marlin/src/gcode/calibrate/G34_M422.cpp
index 808353d3c49cc26b62e67dd57f59b63d2f965a75..9c47d18d4204e28f1e5951e20dbca8c58228a913 100644
--- a/Marlin/src/gcode/calibrate/G34_M422.cpp
+++ b/Marlin/src/gcode/calibrate/G34_M422.cpp
@@ -119,7 +119,7 @@ void GcodeSuite::G34() {
tool_change(0, 0, true);
#endif
- #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+ #if HAS_DUPLICATION_MODE
extruder_duplication_enabled = false;
#endif
diff --git a/Marlin/src/gcode/control/M605.cpp b/Marlin/src/gcode/control/M605.cpp
index ce61f80a7d2cc0b137c4bf1ac923c60220b38e3c..a7eff37fc7efbac3783a062e9997abbe103caab8 100644
--- a/Marlin/src/gcode/control/M605.cpp
+++ b/Marlin/src/gcode/control/M605.cpp
@@ -22,7 +22,7 @@
#include "../../inc/MarlinConfig.h"
-#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+#if HAS_DUPLICATION_MODE
//#define DEBUG_DXC_MODE
@@ -38,8 +38,8 @@
* M605: Set dual x-carriage movement mode
*
* M605 : Restore user specified DEFAULT_DUAL_X_CARRIAGE_MODE
- * M605 S0: Full control mode. The slicer has full control over x-carriage movement
- * M605 S1: Auto-park mode. The inactive head will auto park/unpark without slicer involvement
+ * M605 S0 : Full control mode. The slicer has full control over x-carriage movement
+ * M605 S1 : Auto-park mode. The inactive head will auto park/unpark without slicer involvement
* M605 S2 [Xnnn] [Rmmm]: Duplication mode. The second extruder will duplicate the first with nnn
* units x-offset and an optional differential hotend temperature of
* mmm degrees. E.g., with "M605 S2 X100 R2" the second extruder will duplicate
@@ -59,6 +59,8 @@
const DualXMode previous_mode = dual_x_carriage_mode;
dual_x_carriage_mode = (DualXMode)parser.value_byte();
+
+ #if 0
scaled_duplication_mode = false;
if (dual_x_carriage_mode == DXC_SCALED_DUPLICATION_MODE) {
@@ -77,6 +79,7 @@
}
return;
}
+ #endif
switch (dual_x_carriage_mode) {
case DXC_FULL_CONTROL_MODE:
@@ -147,16 +150,36 @@
#endif // DEBUG_DXC_MODE
}
-#elif ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+#elif ENABLED(MULTI_NOZZLE_DUPLICATION)
+ /**
+ * M605: Set multi-nozzle duplication mode
+ *
+ * S2 - Enable duplication mode
+ * P[mask] - Bit-mask of nozzles to include in the duplication set.
+ * A value of 0 disables duplication.
+ * E[index] - Last nozzle index to include in the duplication set.
+ * A value of 0 disables duplication.
+ */
void GcodeSuite::M605() {
- planner.synchronize();
- extruder_duplication_enabled = parser.intval('S') == (int)DXC_DUPLICATION_MODE;
+ if (parser.seen("EPS")) {
+ planner.synchronize();
+ if (parser.seenval('P')) duplication_e_mask = parser.value_int(); // Set the mask directly
+ else if (parser.seenval('E')) duplication_e_mask = pow(2, e + 1) - 1; // Set the mask by E index
+ const bool ena = (2 == parser.intval('S', extruder_duplication_enabled ? 2 : 0));
+ extruder_duplication_enabled = ena && (duplication_e_mask >= 3);
+ }
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_DUPLICATION_MODE);
- serialprintln_onoff(extruder_duplication_enabled);
+ serialprint_onoff(extruder_duplication_enabled);
+ if (ena) {
+ SERIAL_ECHOPGM(" ( ");
+ HOTEND_LOOP() if (TEST(duplication_e_mask, e)) { SERIAL_ECHO(e); SERIAL_CHAR(' '); }
+ SERIAL_CHAR(')');
+ }
+ SERIAL_EOL();
}
-#endif // DUAL_NOZZLE_DUPLICATION_MODE
+#endif // MULTI_NOZZLE_DUPLICATION
-#endif // DUAL_X_CARRIAGE || DUAL_NOZZLE_DUPLICATION_MODE
+#endif // HAS_DUPICATION_MODE
diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp
index 01186b626f4b44e4f8999e7210cf5a859a4932dc..3e2a3f5f3d5b77c830dddd08db6be4d59fd4fcb8 100644
--- a/Marlin/src/gcode/gcode.cpp
+++ b/Marlin/src/gcode/gcode.cpp
@@ -650,7 +650,7 @@ void GcodeSuite::process_parsed_command(
case 603: M603(); break; // M603: Configure Filament Change
#endif
- #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+ #if HAS_DUPLICATION_MODE
case 605: M605(); break; // M605: Set Dual X Carriage movement mode
#endif
diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
index 2a64e0b678d928d3e7c706886c6ddd73249ec7c2..e178b479a2c235a75c1756eac257c1956a090bc0 100644
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@@ -769,7 +769,7 @@ private:
static void M603();
#endif
- #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+ #if HAS_DUPLICATION_MODE
static void M605();
#endif
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index 1eb610b3d7485a52dc00a9ba355947059cb114cf..070e06be3a537c317dcef9243d8bf1db12f4b219 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -435,6 +435,7 @@
#define SWITCHING_NOZZLE_TWO_SERVOS defined(SWITCHING_NOZZLE_E1_SERVO_NR)
#define HAS_HOTEND_OFFSET (HOTENDS > 1)
+#define HAS_DUPLICATION_MODE (ENABLED(DUAL_X_CARRIAGE) || ENABLED(MULTI_NOZZLE_DUPLICATION))
/**
* DISTINCT_E_FACTORS affects how some E factors are accessed
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 2efd7b5d7a494ce3ed18e4abcdcef9d61059eb01..d230c1972b8dc7b42a831539849bd3dd29b7424f 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -345,6 +345,8 @@
#error "TMC_Z_CALIBRATION has been deprecated in favor of Z_STEPPER_AUTO_ALIGN. Please update your configuration."
#elif defined(Z_MIN_PROBE_ENDSTOP)
#error "Z_MIN_PROBE_ENDSTOP is no longer required. Please remove it from Configuration.h."
+#elif defined(DUAL_NOZZLE_DUPLICATION_MODE)
+ #error "DUAL_NOZZLE_DUPLICATION_MODE is now MULTI_NOZZLE_DUPLICATION. Please update your configuration."
#endif
#define BOARD_MKS_13 -47
@@ -1444,19 +1446,19 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif
/**
- * Basic 2-nozzle duplication mode
+ * Basic multi hotend duplication mode
*/
-#if ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
- #if HOTENDS != 2
- #error "DUAL_NOZZLE_DUPLICATION_MODE requires exactly 2 hotends."
+#if ENABLED(MULTI_NOZZLE_DUPLICATION)
+ #if HOTENDS < 2
+ #error "MULTI_NOZZLE_DUPLICATION requires 2 or more hotends."
#elif ENABLED(DUAL_X_CARRIAGE)
- #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with DUAL_X_CARRIAGE."
+ #error "MULTI_NOZZLE_DUPLICATION is incompatible with DUAL_X_CARRIAGE."
#elif ENABLED(SINGLENOZZLE)
- #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SINGLENOZZLE."
+ #error "MULTI_NOZZLE_DUPLICATION is incompatible with SINGLENOZZLE."
#elif ENABLED(MIXING_EXTRUDER)
- #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with MIXING_EXTRUDER."
+ #error "MULTI_NOZZLE_DUPLICATION is incompatible with MIXING_EXTRUDER."
#elif ENABLED(SWITCHING_EXTRUDER)
- #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SWITCHING_EXTRUDER."
+ #error "MULTI_NOZZLE_DUPLICATION is incompatible with SWITCHING_EXTRUDER."
#endif
#endif
diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp
index 057286c4c6c4575b8246688c3ee06538460b765f..362cb7c4f6a5b8826010c74f4b73025d363c7cc9 100644
--- a/Marlin/src/module/motion.cpp
+++ b/Marlin/src/module/motion.cpp
@@ -872,9 +872,13 @@ void clamp_to_software_endstops(float target[XYZ]) {
#endif // !IS_KINEMATIC
#endif // !UBL_SEGMENTED
-#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
- bool extruder_duplication_enabled = false, // Used in Dual X mode 2 & 3
- scaled_duplication_mode = false; // Used in Dual X mode 2 & 3
+#if HAS_DUPLICATION_MODE
+ bool extruder_duplication_enabled;
+ //scaled_duplication_mode;
+#endif
+
+#if ENABLED(MULTI_NOZZLE_DUPLICATION) && HOTENDS > 2
+ uint8_t duplication_e_mask; // = 0
#endif
#if ENABLED(DUAL_X_CARRIAGE)
diff --git a/Marlin/src/module/motion.h b/Marlin/src/module/motion.h
index 8f5586cb64839ff6bdfcb001226925023e4941a5..e688cdb69ef23e1b494e8e091756528f4d71b8a5 100644
--- a/Marlin/src/module/motion.h
+++ b/Marlin/src/module/motion.h
@@ -313,11 +313,15 @@ void homeaxis(const AxisEnum axis);
#endif
/**
- * Dual X Carriage / Dual Nozzle
+ * Duplication mode
*/
-#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
- extern bool extruder_duplication_enabled, // Used in Dual X mode 2
- scaled_duplication_mode; // Used in Dual X mode 3
+#if HAS_DUPLICATION_MODE
+ extern bool extruder_duplication_enabled; // Used in Dual X mode 2
+ //scaled_duplication_mode; // Used in Dual X mode 3
+#endif
+
+#if ENABLED(MULTI_NOZZLE_DUPLICATION) && HOTENDS > 2
+ uint8_t duplication_e_mask;
#endif
/**
@@ -346,7 +350,7 @@ void homeaxis(const AxisEnum axis);
FORCE_INLINE int x_home_dir(const uint8_t extruder) { return extruder ? X2_HOME_DIR : X_HOME_DIR; }
-#elif ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+#elif ENABLED(MULTI_NOZZLE_DUPLICATION)
enum DualXMode : char {
DXC_DUPLICATION_MODE = 2
diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
index a19cf47a6bd36a5db55037ad5e52c231c0391187..fbe6ca7e1ab66a2cdd07ab78b4e34baf93b9cf3c 100644
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@@ -1996,7 +1996,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
#endif // EXTRUDERS > 1
enable_E0();
g_uc_extruder_last_move[0] = (BLOCK_BUFFER_SIZE) * 2;
- #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+ #if HAS_DUPLICATION_MODE
if (extruder_duplication_enabled) {
enable_E1();
g_uc_extruder_last_move[1] = (BLOCK_BUFFER_SIZE) * 2;
diff --git a/Marlin/src/module/stepper_indirection.h b/Marlin/src/module/stepper_indirection.h
index eafb0c6eef87351fed368d71a9b9c016881aedff..edff2bad37a785eac50cf75437e4b7cafc354a3e 100644
--- a/Marlin/src/module/stepper_indirection.h
+++ b/Marlin/src/module/stepper_indirection.h
@@ -593,47 +593,79 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E_STEP_WRITE(E,V) E0_STEP_WRITE(V)
#define NORM_E_DIR(E) do{ E0_DIR_WRITE(TEST(E, 0) ? !INVERT_E0_DIR: INVERT_E0_DIR); }while(0)
#define REV_E_DIR(E) do{ E0_DIR_WRITE(TEST(E, 0) ? INVERT_E0_DIR: !INVERT_E0_DIR); }while(0)
-#elif E_STEPPERS > 5
- #define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); case 5: E5_STEP_WRITE(V); } }while(0)
- #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); case 5: E5_DIR_WRITE(!INVERT_E5_DIR); } }while(0)
- #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); case 5: E5_DIR_WRITE( INVERT_E5_DIR); } }while(0)
-#elif E_STEPPERS > 4
- #define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); } }while(0)
- #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } }while(0)
- #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); } }while(0)
-#elif E_STEPPERS > 3
- #define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); } }while(0)
- #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); } }while(0)
- #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); } }while(0)
-#elif E_STEPPERS > 2
- #define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); } }while(0)
- #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
- #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
+
#elif E_STEPPERS > 1
- #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
- #define E_STEP_WRITE(E,V) do{ if (extruder_duplication_enabled) { E0_STEP_WRITE(V); E1_STEP_WRITE(V); } \
- else if ((E) == 0) { E0_STEP_WRITE(V); } \
- else { E1_STEP_WRITE(V); } }while(0)
+ #if E_STEPPERS > 5
+ #define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); case 5: E5_STEP_WRITE(V); } }while(0)
+ #define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); case 5: E5_DIR_WRITE(!INVERT_E5_DIR); } }while(0)
+ #define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); case 5: E5_DIR_WRITE( INVERT_E5_DIR); } }while(0)
+ #elif E_STEPPERS > 4
+ #define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); } }while(0)
+ #define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } }while(0)
+ #define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); } }while(0)
+ #elif E_STEPPERS > 3
+ #define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); } }while(0)
+ #define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); } }while(0)
+ #define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); } }while(0)
+ #elif E_STEPPERS > 2
+ #define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); } }while(0)
+ #define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
+ #define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
+ #else
+ #define _E_STEP_WRITE(E,V) do{ if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
+ #define _NORM_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
+ #define _REV_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
+ #endif
+
+ #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(MULTI_NOZZLE_DUPLICATION)
+
+ #define NDIR(N) _DUPE(DIR,!INVERT_E##N##_DIR)
+ #define RDIR(N) _DUPE(DIR, INVERT_E##N##_DIR)
+ #define E_STEP_WRITE(E,V) do{ if (extruder_duplication_enabled) { DUPE(STEP,V); } else _E_STEP_WRITE(E,V); }while(0)
- #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); } \
- else if ((E) == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } \
- else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
+ #if E_STEPPERS > 2
+ #define _DUPE(N,T,V) do{ if (duplication_e_mask <= (N)) E##N##_##T##_WRITE(V); }while(0)
+ #if E_STEPPERS > 5
+ #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); _DUPE(4,T,V); _DUPE(5,T,V); }while(0)
+ #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); NDIR(4); NDIR(5); } else _NORM_E_DIR(E); }while(0)
+ #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); RDIR(4); RDIR(5); } else _REV_E_DIR(E); }while(0)
+ #elif E_STEPPERS > 4
+ #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); _DUPE(4,T,V); }while(0)
+ #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); NDIR(4); } else _NORM_E_DIR(E); }while(0)
+ #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); RDIR(4); } else _REV_E_DIR(E); }while(0)
+ #elif E_STEPPERS > 3
+ #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); }while(0)
+ #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); } else _NORM_E_DIR(E); }while(0)
+ #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); } else _REV_E_DIR(E); }while(0)
+ #else
+ #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); }while(0)
+ #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); } else _NORM_E_DIR(E); }while(0)
+ #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); } else _REV_E_DIR(E); }while(0)
+ #endif
+ #else
+ #define _DUPE(T,V) do{ E0_##T##_WRITE(V); E1_##T##_WRITE(V); }while(0)
+ #define DUPE(T,V) _DUPE(T,V)
+ #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); } else _NORM_E_DIR(E); }while(0)
+ #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); } else _REV_E_DIR(E); }while(0)
+ #endif
- #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); } \
- else if ((E) == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } \
- else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#else
- #define E_STEP_WRITE(E,V) do{ if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
- #define NORM_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
- #define REV_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
+
+ #define E_STEP_WRITE(E,V) _E_STEP_WRITE(E,V)
+ #define NORM_E_DIR(E) _NORM_E_DIR(E)
+ #define REV_E_DIR(E) _REV_E_DIR(E)
+
#endif
+
#elif E_STEPPERS
#define E_STEP_WRITE(E,V) E0_STEP_WRITE(V)
#define NORM_E_DIR(E) E0_DIR_WRITE(!INVERT_E0_DIR)
#define REV_E_DIR(E) E0_DIR_WRITE( INVERT_E0_DIR)
+
#else
#define E_STEP_WRITE(E,V) NOOP
#define NORM_E_DIR(E) NOOP
#define REV_E_DIR(E) NOOP
+
#endif
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index c26c9af3f3ce79de85e35b5361537cea3e5e697b..0f1b0218c968672fb0be68524ee82569a1a7e5aa 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index a544fef95621b927ee3bd070ea54936f82b9d474..a8867960611eb6044487f2357eb8c3be50b1dce4 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 4ffef15bc49f99193660a8f4932e9d8b237452a6..5f7ac359be1a568ca3d7be3e09b6cfb08951ae25 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 7bc37708fd2266e1a9ca30abd0aa10350ad1ae4a..a44d0ecdb69ed43e32656b9e458a0382cdcc532b 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index ebc0399ce4d135e589a5ea0256742244cb74915c..d7ba51bfb6475827fd4b22a7e1ec89f4057b3bc8 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index ebc0399ce4d135e589a5ea0256742244cb74915c..d7ba51bfb6475827fd4b22a7e1ec89f4057b3bc8 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 859508f6eaaf075813ed02adcb840fbff3a5bf0c..0ec457419b7dc22a7a5e61f2e0742ae326751509 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -478,8 +478,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index c4ebb98c435b85e7eed059e11a6bb665c7a3c703..6621d78893a86d8835fdbf318c1559c5abf43feb 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 0361ec9ba99094e56d978e0d475d7800b0eed4a9..d6b5d1df1e28b9db2647b317230238ed73b541b8 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 7a85c98acfa5bc457fffd7e36cc62d1adc4ae423..fd646fdea51789645d168cc6d4c1bef7077ed0ec 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -483,8 +483,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index edf15fb8b3cbaf839461bd4b94c65fd55ee1ee95..c77e300f14446325b9840a0743ad79d320c2e254 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index b72c71bcbf3e2a7458bd89ad3c8fdec2d9ab3b37..a02c2d91c0324f990ed58017dc4350074280a9bb 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 3f71255a35ef2d84e3541cdda00d1d795ab1f338..63a040b822dd5bd405873abf973a23614d29027d 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index ed48f2274fe517964fe9ac102fafc63cec7e2715..a13e5210fa75c800f645a69a374bf3620608b489 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 3f71255a35ef2d84e3541cdda00d1d795ab1f338..63a040b822dd5bd405873abf973a23614d29027d 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index 3342e3eabe3dfaf12a5c6c2dbb7cd40e0dbdbc83..ef1ff1a40c05face63c1e5c395eade151fb46191 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index 6cb948980bc5eacc44d85f20bb6b8c5e0a2875ae..a190c0a81d9fbfe7ee2ce9cc540e7ec44299dfb8 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index 4be6ecf4ea7814ad2b214e7e007b2d3f44ce4518..d2b068805b540538b65334350921d3638cdf8fb3 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index 9e1208ee51a8f78df47a985a4c0c0e11f172c2eb..25d2869cbc1db437baa0f1c57bba2b2cde688cd8 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index a446bc1ddee851b565d19589392e22a549743171..a5c16e925bbfb9e4b1d2a919313f0ffa422d6691 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index 924ff26f15c61b5a370bbb0098448c14b3864efa..de7200f3a7ffae4d2707fceaa78098617ea88268 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index 6c7b7469b4ad5133c0d833309c91a41989fee873..8e8bbd8e077c68cc628949032eb12254229b519b 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index 5639b7911db79c894519919a7341b4e9de1e003f..41f1f44fd3a789f95d5afe84f135a3e1ddd06c7c 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 7316add3c472832b7bcad91850b9464f2dd387fd..cca349c029f4186106fedd56d6aa524496de7710 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index fdffa1d4f3fdcb8f77f184eab601c564afcd5289..a633e75e6df473c06b69741291eeac26ad883ab5 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index a6c02c8bfe3bc9fc7ab107d9c1f26a5058f0a8ba..1e3ac38f5f92ff8e0919d3335f797d703d3389b1 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index ce5bed9f0e52d6ebb8e28af818e3c7aa70a60dd6..9297e692b8d6d72df87c9756ae69b06a450de8fc 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index b51b010684e7f7743b1452c5ca554ca7586e9c84..09a38fccc60829b68b2de181453776b6e738cd20 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index 96b75a13011250213f5bff1b92bb93e58b87a102..7be041e4029a9a40c25a480d7fa1ae7e92168deb 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 46c273ab14116b860cf29a5e2d0305f4c094a56c..ecb295d107d95f2394975651f30a4d8e6a26ba05 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -483,8 +483,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index aa7e13054f94752e37506577de4f6667fd866a05..21c509397ea907c8470df7a5efe9b265a201cfcc 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -484,8 +484,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index c4a58bcce1f5c2c07252a0ce50ae6c94c4fe9d79..b05466d327374bb145ad3e70e0f6ebd83e3dd36d 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index c26a87de722e5064e4a82126d8bb5024d12d960f..162132edac11484097ea7b55ac36df346f7ff13a 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 6a0179369de93b798b14bf2ada30369af8387017..8c971ed7977f5a07b0db24395a1d2609694598ed 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 94ece09db600e602bf485c9175c9d326f2731a4d..cbdea1140f1ef98eadaafb9f9c7f6e2faf615728 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 94ece09db600e602bf485c9175c9d326f2731a4d..cbdea1140f1ef98eadaafb9f9c7f6e2faf615728 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index a775f9bbe25e94a05a9ae3a42ce847d891577fc0..98cc9977631f20b715af7925eb397c39d2147963 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index a5e71626de90e859b6196b8bd273f1c06484f423..47b89b5b90337205680662d1f77e0a0522723212 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index f4a7a794d4ac18d1565f0b48cfbd7c91a8054894..0af872388cb292bdfa4a647ae201af695e72622e 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index dfeb0860da24a6c35d1b3f41c486985b08014f9f..fb39d0decfd4b2ca342ef63fda318bf8055aedae 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 60317604921a42f4a40ede420a31546f7aa66eb0..f54d733baa9991b7bee4eef6cc0b32e1478a7fea 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index c26c9af3f3ce79de85e35b5361537cea3e5e697b..0f1b0218c968672fb0be68524ee82569a1a7e5aa 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index 30885395cd0afc871338b405b2a889c5b72de76f..d7cfa249243d303adac17c8b21aea517066d8a31 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index adab576c046804868b74535d297158146d52c939..9d1c7dfb26480457bafc298b84a67983ae8a39aa 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index d1a8cb0c3d0240413914250f937ce30f94accad5..79d042a7869da254ede2b081c6c1cf9731be8358 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 6a67238c839eb94d93e208f1428165857a604ede..7ef8f8683cc938f7a2e823cd91d7dd3851dc53da 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index e45d504cffcfc26f4bb81a1019cdc7da06821625..f92d49506d6c38ca0f24fc443baa59bc7b987b96 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index ff8edab29d99d8eca7eb69794f2ff460e321f70b..914d04452561da7d174a64fe7bdc6ed3d0098d85 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 1dfcc8e0b5c57aee2f22da9fdd0b1e4d20dcbb42..8cd64e3583b9066614b7771559cc8f1c2cd9825b 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 15dd5cdc4d3abbd5b0696c52cd6f2f049123645a..34282804bfc56dfbe35d5e1859cad78e5b4d66d2 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 341dc45007b60fdec7bbcd69c7f985897ad3a3d4..8b96625a7e02ba240871e9784815adcdec571893 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index b647fcd0d438060f3d7fca1411fffa195b79ea74..149367edbd1827fcf4c418ffe8abaa4fe296cb40 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 9e7ff9746771894a599abb5390eb0ac4f25e8533..b757c6a84398be8016c531c824640d5e326e40ed 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 61b338f8cc1c3863846abe936b438eb289fac5bc..80dc0b7de374251189aae843acfc45dc3577a1ba 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 78a18fcc88ecb9ede5cf29d5daa7353201144061..26af56d027f14426d92483069c7c59b827ed8314 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index 22ad25c7e25b616baa1241cb5a6460bc46149019..130cdc4eaf381fc8c21b690204619397fa31bf1d 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -492,8 +492,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index 19a98865c88e155a735e2de08b9a2964cee1e382..4856d338607e7e129501619b130257fcffb579d3 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 296954be66331fc819fc86a3b906cf2311598625..2df053bf85483beff63a9c03f7eee647b16fda3c 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 5373fe4e063ca9dd13351a7b630fd1271dae27ad..1bbef86e1af3dc41d90254186e5279f8d84fc55f 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index c3d27b1cf7feb417d3652e6558785dea4c9a80da..984bcc303c62e2bd2132e66a6ad72811dab7568f 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 407b059d06dc692f187abb78f6bb253d14a2f5c5..1d46b4b2fa5be9a2b4d2fcee6e11456d80146ab3 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 407b059d06dc692f187abb78f6bb253d14a2f5c5..1d46b4b2fa5be9a2b4d2fcee6e11456d80146ab3 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index fe58c3a5e9f461a2b4bc6db6b60284be07f49e77..11880ff13d7687b45a05162d05f469e53e84d750 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index fe58c3a5e9f461a2b4bc6db6b60284be07f49e77..11880ff13d7687b45a05162d05f469e53e84d750 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 7bd2eff310a1d8b31aa124c734812253af574def..631cc420754c3cd8e32ed251c8d379a0e7d2b9f8 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index da9e9058659fce563d08cad53589af1401c340fc..3417cbdecd425fd67559968997786d41ca21426e 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index fe58c3a5e9f461a2b4bc6db6b60284be07f49e77..11880ff13d7687b45a05162d05f469e53e84d750 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index 42d9eb7c4086ccfcb3adbe63ed7da164ed101ac5..45eac55ba586aaeab8b0f960288fd297e5f9b9b9 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index fd18a73af72e21112d742b2d969afe8ff0f212d3..669a0641149fd119f54433c4ba7c3066c9ac99f6 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 3bea6701cff768b5e2ec082a208eb6a65a94aa60..1fcbf1e44c52003dc9424ff34f5b18dcb840eb4c 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 94bc2eb9bd702e2fb56531613c8dce48ddedda5c..e4ba06ed464207c09eca1975443497098e4f3167 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index 5ef6e7350fb873973cc793beba1058bc1889420e..ca6df57f1f73c6a261b4049676e2d2f753e10e1e 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index 85ce90b63004e05edd7a263262180f44780c2eea..81c13772ac685f409b5be51ed64c804f6f4c39ff 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -479,8 +479,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
-// Allow duplication mode with a basic dual-nozzle extruder
-//#define DUAL_NOZZLE_DUPLICATION_MODE
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false