From 048486390e886d1dda8eeaa23bde11d7a3be4d33 Mon Sep 17 00:00:00 2001 From: Scott Lahteine <github@thinkyhead.com> Date: Thu, 11 Jan 2018 01:10:00 -0600 Subject: [PATCH] Bring some configs up to date --- Marlin/Configuration.h | 3 +-- Marlin/src/config/default/Configuration.h | 3 +-- Marlin/src/config/examples/Tronxy/X1/Configuration.h | 5 ++--- .../src/config/examples/UltiMachine/Archim2/Configuration.h | 2 +- Marlin/src/config/examples/stm32f103ret6/Configuration.h | 2 +- 5 files changed, 6 insertions(+), 9 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index b8cc3d3869..78f77bde47 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1642,11 +1642,10 @@ //#define CR10_STOCKDISPLAY // -// MKS OLED 1.3" 128 x 64 FULL GRAPHICS CONTROLLER +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED // // Tiny, but very sharp OLED display -// If there is a pixel shift, try the other controller. // //#define MKS_12864OLED // Uses the SH1106 controller (default) //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h index 4e674e97c4..2675797bee 100644 --- a/Marlin/src/config/default/Configuration.h +++ b/Marlin/src/config/default/Configuration.h @@ -1642,11 +1642,10 @@ //#define CR10_STOCKDISPLAY // -// MKS OLED 1.3" 128 x 64 FULL GRAPHICS CONTROLLER +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED // // Tiny, but very sharp OLED display -// If there is a pixel shift, try the other controller. // //#define MKS_12864OLED // Uses the SH1106 controller (default) //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h index 4fea1c8411..1f73233bad 100644 --- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h @@ -94,7 +94,7 @@ // @section machine /** - * Select which serial port on the board will be used for communication with the host. + * Select the serial port on the board to use for communication with the host. * This allows the connection of wireless adapters (for instance) to non-default port pins. * Serial port 0 is always used by the Arduino bootloader regardless of this setting. * @@ -1627,11 +1627,10 @@ //#define CR10_STOCKDISPLAY // -// MKS OLED 1.3" 128 x 64 FULL GRAPHICS CONTROLLER +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED // // Tiny, but very sharp OLED display -// If there is a pixel shift, try the other controller. // //#define MKS_12864OLED // Uses the SH1106 controller (default) //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h index 32cd47806f..96534c430a 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h @@ -94,7 +94,7 @@ // @section machine /** - * Select which serial port on the board will be used for communication with the host. + * Select the serial port on the board to use for communication with the host. * This allows the connection of wireless adapters (for instance) to non-default port pins. * Serial port 0 is always used by the Arduino bootloader regardless of this setting. * diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h index 82b72cead3..941f5ce852 100644 --- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h +++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h @@ -94,7 +94,7 @@ // @section machine /** - * Select which serial port on the board will be used for communication with the host. + * Select the serial port on the board to use for communication with the host. * This allows the connection of wireless adapters (for instance) to non-default port pins. * Serial port 0 is always used by the Arduino bootloader regardless of this setting. * -- GitLab