From 0181e57417912c95f4630f9ad80fa2e48c48c199 Mon Sep 17 00:00:00 2001
From: Robby Candra <robbycandra.mail@gmail.com>
Date: Fri, 3 May 2019 10:29:05 +0700
Subject: [PATCH] Add a minimum Z change option to power-loss recovery (#13859)
---
Marlin/Configuration_adv.h | 4 ++++
Marlin/src/feature/power_loss_recovery.cpp | 11 +++++++----
config/default/Configuration_adv.h | 4 ++++
config/examples/3DFabXYZ/Migbot/Configuration_adv.h | 4 ++++
config/examples/AlephObjects/TAZ4/Configuration_adv.h | 4 ++++
.../examples/AliExpress/UM2pExt/Configuration_adv.h | 4 ++++
config/examples/Anet/A2/Configuration_adv.h | 4 ++++
config/examples/Anet/A2plus/Configuration_adv.h | 4 ++++
config/examples/Anet/A6/Configuration_adv.h | 4 ++++
config/examples/Anet/A8/Configuration_adv.h | 4 ++++
config/examples/AnyCubic/i3/Configuration_adv.h | 4 ++++
config/examples/ArmEd/Configuration_adv.h | 4 ++++
.../examples/BIBO/TouchX/cyclops/Configuration_adv.h | 4 ++++
.../examples/BIBO/TouchX/default/Configuration_adv.h | 4 ++++
config/examples/BQ/Hephestos/Configuration_adv.h | 4 ++++
config/examples/BQ/Hephestos_2/Configuration_adv.h | 4 ++++
config/examples/BQ/WITBOX/Configuration_adv.h | 4 ++++
config/examples/Cartesio/Configuration_adv.h | 4 ++++
config/examples/Creality/CR-10/Configuration_adv.h | 4 ++++
config/examples/Creality/CR-10S/Configuration_adv.h | 4 ++++
config/examples/Creality/CR-10_5S/Configuration_adv.h | 4 ++++
.../examples/Creality/CR-10mini/Configuration_adv.h | 4 ++++
config/examples/Creality/CR-8/Configuration_adv.h | 4 ++++
config/examples/Creality/Ender-2/Configuration_adv.h | 4 ++++
config/examples/Creality/Ender-3/Configuration_adv.h | 4 ++++
config/examples/Creality/Ender-4/Configuration_adv.h | 4 ++++
config/examples/Einstart-S/Configuration_adv.h | 4 ++++
config/examples/Felix/Configuration_adv.h | 4 ++++
.../FlashForge/CreatorPro/Configuration_adv.h | 4 ++++
.../examples/FolgerTech/i3-2020/Configuration_adv.h | 4 ++++
config/examples/Formbot/Raptor/Configuration_adv.h | 4 ++++
config/examples/Formbot/T_Rex_2+/Configuration_adv.h | 4 ++++
config/examples/Formbot/T_Rex_3/Configuration_adv.h | 4 ++++
.../examples/Geeetech/MeCreator2/Configuration_adv.h | 4 ++++
.../Geeetech/Prusa i3 Pro C/Configuration_adv.h | 4 ++++
.../Geeetech/Prusa i3 Pro W/Configuration_adv.h | 4 ++++
config/examples/Infitary/i3-M508/Configuration_adv.h | 4 ++++
config/examples/JGAurora/A5/Configuration_adv.h | 4 ++++
config/examples/MakerParts/Configuration_adv.h | 4 ++++
config/examples/Malyan/M150/Configuration_adv.h | 4 ++++
config/examples/Malyan/M200/Configuration_adv.h | 4 ++++
.../Micromake/C1/enhanced/Configuration_adv.h | 4 ++++
config/examples/Mks/Robin/Configuration_adv.h | 4 ++++
config/examples/Mks/Sbase/Configuration_adv.h | 4 ++++
config/examples/RapideLite/RL200/Configuration_adv.h | 4 ++++
config/examples/RigidBot/Configuration_adv.h | 4 ++++
config/examples/SCARA/Configuration_adv.h | 4 ++++
.../STM32/Black_STM32F407VET6/Configuration_adv.h | 4 ++++
config/examples/Sanguinololu/Configuration_adv.h | 4 ++++
config/examples/TheBorg/Configuration_adv.h | 4 ++++
config/examples/TinyBoy2/Configuration_adv.h | 4 ++++
config/examples/Tronxy/X3A/Configuration_adv.h | 4 ++++
config/examples/Tronxy/X5S-2E/Configuration_adv.h | 4 ++++
.../examples/UltiMachine/Archim1/Configuration_adv.h | 4 ++++
.../examples/UltiMachine/Archim2/Configuration_adv.h | 4 ++++
config/examples/VORONDesign/Configuration_adv.h | 4 ++++
config/examples/Velleman/K8200/Configuration_adv.h | 4 ++++
config/examples/Velleman/K8400/Configuration_adv.h | 4 ++++
.../examples/Wanhao/Duplicator 6/Configuration_adv.h | 4 ++++
.../delta/Anycubic/Kossel/Configuration_adv.h | 4 ++++
.../delta/FLSUN/auto_calibrate/Configuration_adv.h | 4 ++++
.../examples/delta/FLSUN/kossel/Configuration_adv.h | 4 ++++
.../delta/FLSUN/kossel_mini/Configuration_adv.h | 4 ++++
.../delta/Geeetech/Rostock 301/Configuration_adv.h | 4 ++++
config/examples/delta/MKS/SBASE/Configuration_adv.h | 4 ++++
.../delta/Tevo Little Monster/Configuration_adv.h | 4 ++++
config/examples/delta/generic/Configuration_adv.h | 4 ++++
config/examples/delta/kossel_mini/Configuration_adv.h | 4 ++++
config/examples/delta/kossel_xl/Configuration_adv.h | 4 ++++
config/examples/gCreate/gMax1.5+/Configuration_adv.h | 4 ++++
config/examples/makibox/Configuration_adv.h | 4 ++++
config/examples/tvrrug/Round2/Configuration_adv.h | 4 ++++
config/examples/wt150/Configuration_adv.h | 4 ++++
73 files changed, 295 insertions(+), 4 deletions(-)
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index a88bb7e529..ee60630821 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -803,6 +803,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/Marlin/src/feature/power_loss_recovery.cpp b/Marlin/src/feature/power_loss_recovery.cpp
index b74d37fd23..b9321a48c5 100644
--- a/Marlin/src/feature/power_loss_recovery.cpp
+++ b/Marlin/src/feature/power_loss_recovery.cpp
@@ -126,6 +126,10 @@ void PrintJobRecovery::save(const bool force/*=false*/, const bool save_queue/*=
millis_t ms = millis();
#endif
+ #ifndef POWER_LOSS_MIN_Z_CHANGE
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // Vase-mode-friendly out of the box
+ #endif
+
// Did Z change since the last call?
if (force
#if DISABLED(SAVE_EACH_CMD_MODE) // Always save state when enabled
@@ -135,8 +139,8 @@ void PrintJobRecovery::save(const bool force/*=false*/, const bool save_queue/*=
#if SAVE_INFO_INTERVAL_MS > 0 // Save if interval is elapsed
|| ELAPSED(ms, next_save_ms)
#endif
- // Save every time Z is higher than the last call
- || current_position[Z_AXIS] > info.current_position[Z_AXIS]
+ // Save if Z is above the last-saved position by some minimum height
+ || current_position[Z_AXIS] > info.current_position[Z_AXIS] + POWER_LOSS_MIN_Z_CHANGE
#endif
) {
@@ -228,9 +232,8 @@ void PrintJobRecovery::write() {
open(false);
file.seekSet(0);
const int16_t ret = file.write(&info, sizeof(info));
- close();
-
if (ret == -1) DEBUG_ECHOLNPGM("Power-loss file write failed.");
+ if (!file.close()) DEBUG_ECHOLNPGM("Power-loss file close failed.");
}
/**
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index 08de815413..ff025f51e8 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 383213626b..7a59f107dd 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 257a248a0b..5cdb83ba1e 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 93e87862eb..ab75d623aa 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 4834a3994a..6e58c7948b 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 4834a3994a..6e58c7948b 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 302dfb40fc..a67892a12c 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index 39132b021e..95a606ca3f 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 2fd38abfd8..703df68cad 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index a146d91af1..108a3e6c97 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -809,6 +809,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index c180d18d45..d5af25267b 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 3302e8ae7d..592aac14b5 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 53f3134020..1ec1e128a8 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -802,6 +802,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 3834da29a1..242a3f8de6 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -810,6 +810,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 53f3134020..1ec1e128a8 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -802,6 +802,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index 8e6e38b3a2..dbcd4b090f 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index 837815e204..00edc64c1b 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index 0d74d409e3..757c987e39 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index 5e82cc49bd..229f857d61 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index d8693ddad8..a275d3c712 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index 60ca620cd1..22a6bfe2ed 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index e60c4e9e62..b211df3e6e 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -802,6 +802,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index d1c8eb8922..de3e2a8193 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -802,6 +802,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 39422fd274..5cd499cafe 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index bee6dd347b..be67811608 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index afd1f0748b..0594ad7e0a 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 71c98658c3..591b8d6a4c 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -801,6 +801,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 0a33e9da97..902b9d8198 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index bad825a2a3..d60aede421 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index f8810cf118..93b281ff1f 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -809,6 +809,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 33c38eb3c8..ddd889d9a0 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -809,6 +809,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 3081beb75e..83a1e1934a 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 716f54e5a3..9a07e0ffd5 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 716f54e5a3..9a07e0ffd5 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 19e0406973..715c61bb61 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index 92a36c9a53..2c1c299ad6 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -802,6 +802,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index 53d04f7568..611fbed3e3 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 22bbfdeb40..f1f9a7b609 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index b050686b99..0390fe3d61 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 5eb33039b3..31e1d663e5 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index 732ba5b6f4..4fa7e92c84 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 188bd12559..3a40ef7d71 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -806,6 +806,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index 5bad91cd1a..a587dc973e 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index b44c8c1fd6..14a2302685 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index e9cdd349a1..c2e6ac77da 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -802,6 +802,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index c843b80b1d..0ac20e2f55 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -802,6 +802,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index be70d69cb5..9dac00ffc5 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index a411d45e1d..104ba5e5d3 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index d01a1d5746..37e4369f34 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 4d9a1b7c12..adcbb717b7 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index 554879ec6e..a3a6de6772 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 29f8a2bcd0..b6575af34f 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 9f68524c8c..0e1f36a0bc 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index b7651303fe..97604b94ae 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index 1e09e77274..7215948503 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -818,6 +818,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index bd70a050f1..f591ddee1e 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 296bfd558e..72614cd025 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -804,6 +804,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index 81ba8a630d..6d3bacf6c5 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -804,6 +804,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 396495622f..873150a52d 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -804,6 +804,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 396495622f..873150a52d 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -804,6 +804,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 912daf2099..d716819cf3 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -804,6 +804,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 912daf2099..d716819cf3 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
@@ -804,6 +804,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 5bf430e767..365e125602 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -804,6 +804,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 9b68fe1283..0ca670fce3 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
@@ -804,6 +804,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index 912daf2099..d716819cf3 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -804,6 +804,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index d2ef864b20..225de3f158 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -803,6 +803,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index e8ee2f8ac7..64e3747628 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -804,6 +804,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 5dbf13ec26..49087c9e4a 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 43c5fb9f91..7a04344763 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index 3f2af385a4..6cb3036695 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -805,6 +805,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index 336e671183..13307d9534 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -806,6 +806,10 @@
#if ENABLED(POWER_LOSS_RECOVERY)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+
+ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+ // especially with "vase mode" printing. Set too high and vases cannot be continued.
+ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
#endif
/**
--
GitLab