From 00e2f6da8f097215ddb96a83fe6853d26fb6bca4 Mon Sep 17 00:00:00 2001
From: wookie666 <chemmings60@gmail.com>
Date: Fri, 19 Jul 2019 21:07:26 +1000
Subject: [PATCH] Improve magnetic dock switching toolhead (#14663)
---
Marlin/Configuration.h | 9 ++-
Marlin/src/inc/SanityCheck.h | 17 +++--
Marlin/src/module/tool_change.cpp | 74 +++++++++++--------
config/default/Configuration.h | 9 ++-
.../examples/3DFabXYZ/Migbot/Configuration.h | 9 ++-
.../AlephObjects/TAZ4/Configuration.h | 9 ++-
config/examples/Alfawise/U20/Configuration.h | 9 ++-
.../AliExpress/CL-260/Configuration.h | 9 ++-
.../AliExpress/UM2pExt/Configuration.h | 9 ++-
config/examples/Anet/A2/Configuration.h | 9 ++-
config/examples/Anet/A2plus/Configuration.h | 9 ++-
config/examples/Anet/A6/Configuration.h | 9 ++-
config/examples/Anet/A8/Configuration.h | 9 ++-
config/examples/Anet/A8plus/Configuration.h | 9 ++-
config/examples/Anet/E16/Configuration.h | 9 ++-
config/examples/AnyCubic/i3/Configuration.h | 9 ++-
config/examples/ArmEd/Configuration.h | 9 ++-
config/examples/Azteeg/X5GT/Configuration.h | 9 ++-
.../BIBO/TouchX/cyclops/Configuration.h | 9 ++-
.../BIBO/TouchX/default/Configuration.h | 9 ++-
config/examples/BQ/Hephestos/Configuration.h | 9 ++-
.../examples/BQ/Hephestos_2/Configuration.h | 9 ++-
config/examples/BQ/WITBOX/Configuration.h | 9 ++-
config/examples/Cartesio/Configuration.h | 9 ++-
.../examples/Creality/CR-10/Configuration.h | 9 ++-
.../examples/Creality/CR-10S/Configuration.h | 9 ++-
.../Creality/CR-10_5S/Configuration.h | 9 ++-
.../Creality/CR-10mini/Configuration.h | 9 ++-
.../Creality/CR-20 Pro/Configuration.h | 9 ++-
.../examples/Creality/CR-20/Configuration.h | 9 ++-
config/examples/Creality/CR-8/Configuration.h | 9 ++-
.../examples/Creality/Ender-2/Configuration.h | 9 ++-
.../examples/Creality/Ender-3/Configuration.h | 9 ++-
.../examples/Creality/Ender-4/Configuration.h | 9 ++-
.../examples/Creality/Ender-5/Configuration.h | 9 ++-
.../Dagoma/Disco Ultimate/Configuration.h | 9 ++-
.../Sidewinder X1/Configuration.h | 9 ++-
config/examples/Einstart-S/Configuration.h | 9 ++-
config/examples/FYSETC/AIO_II/Configuration.h | 9 ++-
.../FYSETC/Cheetah/BLTouch/Configuration.h | 11 ++-
.../FYSETC/Cheetah/base/Configuration.h | 9 ++-
config/examples/FYSETC/F6_13/Configuration.h | 9 ++-
config/examples/Felix/Configuration.h | 9 ++-
config/examples/Felix/DUAL/Configuration.h | 9 ++-
.../FlashForge/CreatorPro/Configuration.h | 9 ++-
.../FolgerTech/i3-2020/Configuration.h | 9 ++-
.../examples/Formbot/Raptor/Configuration.h | 9 ++-
.../examples/Formbot/T_Rex_2+/Configuration.h | 9 ++-
.../examples/Formbot/T_Rex_3/Configuration.h | 9 ++-
config/examples/Geeetech/A10/Configuration.h | 9 ++-
config/examples/Geeetech/A10M/Configuration.h | 9 ++-
config/examples/Geeetech/A20M/Configuration.h | 9 ++-
.../examples/Geeetech/GT2560/Configuration.h | 9 ++-
.../Geeetech/I3_Pro_X-GT2560/Configuration.h | 9 ++-
.../Geeetech/MeCreator2/Configuration.h | 9 ++-
.../Prusa i3 Pro B/bltouch/Configuration.h | 9 ++-
.../Prusa i3 Pro B/noprobe/Configuration.h | 9 ++-
.../Geeetech/Prusa i3 Pro C/Configuration.h | 9 ++-
.../Geeetech/Prusa i3 Pro W/Configuration.h | 9 ++-
.../examples/Infitary/i3-M508/Configuration.h | 9 ++-
config/examples/JGAurora/A1/Configuration.h | 9 ++-
config/examples/JGAurora/A5/Configuration.h | 9 ++-
config/examples/JGAurora/A5S/Configuration.h | 9 ++-
config/examples/MakerParts/Configuration.h | 9 ++-
config/examples/Malyan/M150/Configuration.h | 9 ++-
config/examples/Malyan/M200/Configuration.h | 9 ++-
.../Micromake/C1/basic/Configuration.h | 9 ++-
.../Micromake/C1/enhanced/Configuration.h | 9 ++-
config/examples/Mks/Robin/Configuration.h | 9 ++-
config/examples/Mks/Sbase/Configuration.h | 9 ++-
.../Printrbot/PrintrboardG2/Configuration.h | 9 ++-
.../examples/RapideLite/RL200/Configuration.h | 9 ++-
.../examples/RepRapPro/Huxley/Configuration.h | 9 ++-
.../RepRapWorld/Megatronics/Configuration.h | 9 ++-
config/examples/RigidBot/Configuration.h | 9 ++-
config/examples/SCARA/Configuration.h | 9 ++-
.../STM32/Black_STM32F407VET6/Configuration.h | 9 ++-
.../examples/STM32/STM32F10/Configuration.h | 9 ++-
config/examples/STM32/STM32F4/Configuration.h | 9 ++-
.../STM32/stm32f103ret6/Configuration.h | 9 ++-
config/examples/Sanguinololu/Configuration.h | 9 ++-
.../Tevo/Michelangelo/Configuration.h | 9 ++-
.../Tevo/Tarantula Pro/Configuration.h | 9 ++-
.../Tornado/V1 (MKS Base)/Configuration.h | 9 ++-
.../Tornado/V2 (MKS GEN-L)/Configuration.h | 9 ++-
config/examples/TheBorg/Configuration.h | 9 ++-
config/examples/TinyBoy2/Configuration.h | 9 ++-
config/examples/Tronxy/X1/Configuration.h | 9 ++-
config/examples/Tronxy/X3A/Configuration.h | 9 ++-
config/examples/Tronxy/X5S-2E/Configuration.h | 9 ++-
config/examples/Tronxy/X5S/Configuration.h | 9 ++-
config/examples/Tronxy/XY100/Configuration.h | 9 ++-
.../UltiMachine/Archim1/Configuration.h | 9 ++-
.../UltiMachine/Archim2/Configuration.h | 9 ++-
config/examples/VORONDesign/Configuration.h | 9 ++-
.../examples/Velleman/K8200/Configuration.h | 9 ++-
.../examples/Velleman/K8400/Configuration.h | 9 ++-
.../Velleman/K8400/Dual-head/Configuration.h | 9 ++-
.../examples/WASP/PowerWASP/Configuration.h | 9 ++-
.../Wanhao/Duplicator 6/Configuration.h | 9 ++-
.../Wanhao/Duplicator i3 Mini/Configuration.h | 9 ++-
.../examples/adafruit/ST7565/Configuration.h | 9 ++-
.../delta/Anycubic/Kossel/Configuration.h | 9 ++-
.../FLSUN/auto_calibrate/Configuration.h | 9 ++-
.../delta/FLSUN/kossel/Configuration.h | 9 ++-
.../delta/FLSUN/kossel_mini/Configuration.h | 9 ++-
.../Geeetech/Rostock 301/Configuration.h | 9 ++-
.../delta/Hatchbox_Alpha/Configuration.h | 9 ++-
.../examples/delta/MKS/SBASE/Configuration.h | 9 ++-
.../delta/Tevo Little Monster/Configuration.h | 9 ++-
config/examples/delta/generic/Configuration.h | 9 ++-
.../delta/kossel_mini/Configuration.h | 9 ++-
.../examples/delta/kossel_pro/Configuration.h | 9 ++-
.../examples/delta/kossel_xl/Configuration.h | 9 ++-
.../examples/gCreate/gMax1.5+/Configuration.h | 9 ++-
config/examples/makibox/Configuration.h | 9 ++-
config/examples/tvrrug/Round2/Configuration.h | 9 ++-
config/examples/wt150/Configuration.h | 9 ++-
118 files changed, 983 insertions(+), 154 deletions(-)
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 9a25b6ac9a..e2a6fe746d 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index bff6168d93..d4c7467c67 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -907,12 +907,11 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif
#endif
-#if ANY(MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
- #if ENABLED(EXT_SOLENOID)
- #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD and EXT_SOLENOID are incompatible. (Pins are used twice.)"
- #elif !PIN_EXISTS(SOL0)
- #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SOL0_PIN."
- #elif !defined(SWITCHING_TOOLHEAD_Y_POS)
+/**
+ * (Electro)magnetic Switching Toolhead requirements
+ */
+#if EITHER(MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+ #ifndef SWITCHING_TOOLHEAD_Y_POS
#error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_Y_POS"
#elif !defined(SWITCHING_TOOLHEAD_X_POS)
#error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_X_POS"
@@ -920,6 +919,12 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_Z_HOP."
#elif !defined(SWITCHING_TOOLHEAD_Y_CLEAR)
#error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_Y_CLEAR."
+ #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+ #if ENABLED(EXT_SOLENOID)
+ #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD and EXT_SOLENOID are incompatible. (Pins are used twice.)"
+ #elif !PIN_EXISTS(SOL0)
+ #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SOL0_PIN."
+ #endif
#endif
#endif
diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp
index 420128f6a9..0efaf337cc 100644
--- a/Marlin/src/module/tool_change.cpp
+++ b/Marlin/src/module/tool_change.cpp
@@ -349,7 +349,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
fast_line_to_current(X_AXIS);
planner.synchronize(); // Always sync the final move
- DEBUG_ECHOLNPGM("PE Tool-Change done.");
+ if (DEBUGGING(LEVELING)) DEBUG_POS("PE Tool-Change done.", current_position);
}
else { // nomove == true
// Only engage magnetic field for new extruder
@@ -455,7 +455,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
fast_line_to_current(Y_AXIS); // Move away from docked toolhead
planner.synchronize(); // Always sync the final move
- if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("ST Tool-Change done.");
+ if (DEBUGGING(LEVELING)) DEBUG_POS("ST Tool-Change done.", current_position);
}
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
@@ -463,9 +463,13 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
inline void magnetic_switching_toolhead_tool_change(const uint8_t tmp_extruder, bool no_move/*=false*/) {
if (no_move) return;
- constexpr float toolheadposx[] = SWITCHING_TOOLHEAD_X_POS;
+ constexpr float toolheadposx[] = SWITCHING_TOOLHEAD_X_POS,
+ toolheadclearx[] = SWITCHING_TOOLHEAD_X_SECURITY;
+
const float placexpos = toolheadposx[active_extruder],
- grabxpos = toolheadposx[tmp_extruder];
+ placexclear = toolheadclearx[active_extruder],
+ grabxpos = toolheadposx[tmp_extruder],
+ grabxclear = toolheadclearx[tmp_extruder];
/**
* 1. Move to switch position of current toolhead
@@ -474,7 +478,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
* 4. Grab the new toolhead and move to security position
*/
- if (DEBUGGING(LEVELING)) DEBUG_POS("Starting Toolhead change", current_position);
+ if (DEBUGGING(LEVELING)) DEBUG_POS("Start MST Tool-Change", current_position);
// 1. Move to switch position current toolhead
@@ -485,7 +489,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
}
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS], active_extruder);
- current_position[X_AXIS] = placexpos + SWITCHING_TOOLHEAD_X_SECURITY;
+ current_position[X_AXIS] = placexclear;
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_POS("Move X SwitchPos + Security", current_position);
@@ -510,7 +514,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
if (DEBUGGING(LEVELING)) {
planner.synchronize();
- SERIAL_ECHOLNPGM("(2) Release and Place Toolhead");
+ DEBUG_ECHOLNPGM("(2) Release and Place Toolhead");
}
current_position[Y_AXIS] = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_RELEASE;
@@ -528,7 +532,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
if (DEBUGGING(LEVELING)) {
planner.synchronize();
- SERIAL_ECHOLNPGM("(3) Move to new toolhead position");
+ DEBUG_ECHOLNPGM("(3) Move to new toolhead position");
}
current_position[X_AXIS] = grabxpos;
@@ -539,7 +543,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
if (DEBUGGING(LEVELING)) {
planner.synchronize();
- SERIAL_ECHOLNPGM("(4) Grab new toolhead and move to security position");
+ DEBUG_ECHOLNPGM("(4) Grab new toolhead, move to security position");
}
current_position[Y_AXIS] = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_RELEASE;
@@ -552,10 +556,22 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
DEBUG_POS("Move Y SwitchPos", current_position);
}
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS] * 0.2, active_extruder);
- planner.synchronize();
- safe_delay(100); // Give switch time to settle
- current_position[X_AXIS] = grabxpos + SWITCHING_TOOLHEAD_X_SECURITY;
+ #if ENABLED(PRIME_BEFORE_REMOVE) && (SWITCHING_TOOLHEAD_PRIME_MM || SWITCHING_TOOLHEAD_RETRACT_MM)
+ #if SWITCHING_TOOLHEAD_PRIME_MM
+ current_position[E_AXIS] += SWITCHING_TOOLHEAD_PRIME_MM;
+ planner.buffer_line(current_position, MMM_TO_MMS(SWITCHING_TOOLHEAD_PRIME_FEEDRATE), tmp_extruder);
+ #endif
+ #if SWITCHING_TOOLHEAD_RETRACT_MM
+ current_position[E_AXIS] -= SWITCHING_TOOLHEAD_RETRACT_MM;
+ planner.buffer_line(current_position, MMM_TO_MMS(SWITCHING_TOOLHEAD_RETRACT_FEEDRATE), tmp_extruder);
+ #endif
+ #else
+ planner.synchronize();
+ safe_delay(100); // Give switch time to settle
+ #endif
+
+ current_position[X_AXIS] = grabxclear;
if (DEBUGGING(LEVELING)) DEBUG_POS("Move to new toolhead X + Security", current_position);
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[X_AXIS] * 0.1, active_extruder);
planner.synchronize();
@@ -565,6 +581,8 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
if (DEBUGGING(LEVELING)) DEBUG_POS("Move back Y clear", current_position);
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS], active_extruder); // move away from docked toolhead
planner.synchronize(); // Always sync last tool-change move
+
+ if (DEBUGGING(LEVELING)) DEBUG_POS("MST Tool-Change done.", current_position);
}
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
@@ -573,7 +591,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
inline void est_deactivate_solenoid() { OUT_WRITE(SOL0_PIN, LOW); }
void est_init() { est_activate_solenoid(); }
- inline void electromagnetic_switching_toolhead(const uint8_t tmp_extruder, bool no_move) {
+ inline void em_switching_toolhead_tool_change(const uint8_t tmp_extruder, bool no_move) {
if (no_move) return;
constexpr float toolheadposx[] = SWITCHING_TOOLHEAD_X_POS;
@@ -592,7 +610,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
* 9. Apply Z hotend offset to current position
*/
- if (DEBUGGING(LEVELING)) DEBUG_POS("Starting Autopark", current_position);
+ if (DEBUGGING(LEVELING)) DEBUG_POS("Start EMST Tool-Change", current_position);
// 1. Raise Z-Axis to give enough clearance
@@ -624,59 +642,51 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
// 4. Disengage magnetic field, wait for delay
- if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(4) Disengage magnet");
-
planner.synchronize();
+ if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("(4) Disengage magnet");
est_deactivate_solenoid();
// 5. Leave extruder and move to position near new extruder parking
if (DEBUGGING(LEVELING)) {
- SERIAL_ECHOLNPGM("(5) Move near new extruder parking");
+ DEBUG_ECHOLNPGM("(5) Move near new extruder parking");
DEBUG_POS("Moving ParkPos", current_position);
}
current_position[Y_AXIS] += SWITCHING_TOOLHEAD_Y_CLEAR;
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS] * 0.5f, active_extruder);
-
current_position[X_AXIS] = grabxpos + hotend_offset[X_AXIS][active_extruder];
current_position[Y_AXIS] = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_CLEAR + hotend_offset[Y_AXIS][active_extruder];
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[X_AXIS], active_extruder);
// 6. Move gently to park position of new extruder
+ current_position[Y_AXIS] -= SWITCHING_TOOLHEAD_Y_CLEAR;
if (DEBUGGING(LEVELING)) {
planner.synchronize();
- SERIAL_ECHOLNPGM("(6) Move near new extruder");
+ DEBUG_ECHOLNPGM("(6) Move near new extruder");
}
-
- current_position[Y_AXIS] -= SWITCHING_TOOLHEAD_Y_CLEAR;
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS] * 0.5f, active_extruder);
// 7. Engage magnetic field for new extruder parking
planner.synchronize();
-
- if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(7) Engage magnetic field");
-
+ if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("(7) Engage magnetic field");
est_activate_solenoid();
// 8. Unpark extruder
- if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(8) Unpark extruder");
-
current_position[Y_AXIS] += SWITCHING_TOOLHEAD_Y_CLEAR;
-
+ if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("(8) Unpark extruder");
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[X_AXIS] * 0.5f, active_extruder);
+ planner.synchronize(); // Always sync the final move
// 9. Apply Z hotend offset to current position
+ if (DEBUGGING(LEVELING)) DEBUG_POS("(9) Applying Z-offset", current_position);
current_position[Z_AXIS] += hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder];
- if (DEBUGGING(LEVELING)) {
- planner.synchronize();
- DEBUG_POS("(9) Applying Z-offset", current_position);
- }
+ if (DEBUGGING(LEVELING)) DEBUG_POS("EMST Tool-Change done.", current_position);
}
#endif // ELECTROMAGNETIC_SWITCHING_TOOLHEAD
@@ -905,7 +915,7 @@ void tool_change(const uint8_t tmp_extruder, bool no_move/*=false*/) {
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) // Magnetic Switching Toolhead
magnetic_switching_toolhead_tool_change(tmp_extruder, no_move);
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) // Magnetic Switching ToolChanger
- electromagnetic_switching_toolhead(tmp_extruder, no_move);
+ em_switching_toolhead_tool_change(tmp_extruder, no_move);
#elif ENABLED(SWITCHING_NOZZLE) && !SWITCHING_NOZZLE_TWO_SERVOS // Switching Nozzle (single servo)
// Raise by a configured distance to avoid workpiece, except with
// SWITCHING_NOZZLE_TWO_SERVOS, as both nozzles will lift instead.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
index 9a25b6ac9a..e2a6fe746d 100644
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index 8da4a630f0..426181d9ea 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
index 04814d8f09..c5568fc37b 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
index 260851b905..671bb23b9a 100644
--- a/config/examples/Alfawise/U20/Configuration.h
+++ b/config/examples/Alfawise/U20/Configuration.h
@@ -326,7 +326,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index 49640b0e5d..9744523e7a 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index 33f600b3b3..c3d463e934 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index a4fe30333d..71190bdf13 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index 87931a181e..03919ffe0d 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 46cda6b4e8..1c3aaa938a 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
index 10cae8b041..27f3d47c69 100644
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@@ -276,7 +276,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
index 36ebccfa6c..a008a7dc12 100644
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@@ -276,7 +276,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h
index 2a65cd45c7..b01ad5378b 100644
--- a/config/examples/Anet/E16/Configuration.h
+++ b/config/examples/Anet/E16/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index c99f8d3823..f010f346e6 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index a4053fff19..a23bb12d73 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index 4b6524cc17..202ad18504 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index d4202433aa..5d55ffe5c3 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index 68833cce7c..624b2c1f42 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index 5abc10aa29..84a40ac5c9 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index 17000ea329..3a280d8999 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -283,7 +283,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index 0071948d72..10e39fdac1 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index 53aea38d0f..c04005b306 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -276,7 +276,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h
index 3fac24fb42..fb555d74ec 100644
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h
index 6f99beafbb..8c6534aa46 100644
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h
index 8ddfeb50d9..d1cce8794e 100644
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h
index e2e3631314..aabc46916a 100644
--- a/config/examples/Creality/CR-10mini/Configuration.h
+++ b/config/examples/Creality/CR-10mini/Configuration.h
@@ -284,7 +284,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h
index 2b13c1c0b5..92aee6e86c 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration.h
+++ b/config/examples/Creality/CR-20 Pro/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h
index fc5785ee03..da281b3211 100644
--- a/config/examples/Creality/CR-20/Configuration.h
+++ b/config/examples/Creality/CR-20/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index 425b15c6d2..e0fe432bc7 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index db181c1353..cb2b9f0b5e 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h
index 89fd4f10a0..2ee9619760 100644
--- a/config/examples/Creality/Ender-3/Configuration.h
+++ b/config/examples/Creality/Ender-3/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index bf379ed9ed..c62e7b3fdd 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h
index 21e27bfa55..80223f29a8 100644
--- a/config/examples/Creality/Ender-5/Configuration.h
+++ b/config/examples/Creality/Ender-5/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h
index e87ea16842..5ad4cbfea8 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
index 8de028a9d0..5ac5acbcd4 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h
index a48f399adf..32b899f688 100644
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h
index f32bc96ebc..0192a49226 100644
--- a/config/examples/FYSETC/AIO_II/Configuration.h
+++ b/config/examples/FYSETC/AIO_II/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
index 7d14836d7a..67a11b7c6c 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
@@ -268,7 +268,16 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
+ #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+ #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
#endif
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration.h b/config/examples/FYSETC/Cheetah/base/Configuration.h
index 73687523a1..1b3bf83733 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h
index 125f2821a5..859d2e0914 100644
--- a/config/examples/FYSETC/F6_13/Configuration.h
+++ b/config/examples/FYSETC/F6_13/Configuration.h
@@ -277,7 +277,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h
index f052a755fc..c43f5265b2 100644
--- a/config/examples/Felix/Configuration.h
+++ b/config/examples/Felix/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index 68f5ca58ba..f46d93d4bb 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index b5f074aeb4..7f82a9bb0c 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h
index 82f63b1add..6022918959 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h
index 6be6c90613..87e7fe9bbb 100644
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@@ -316,7 +316,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index 33e68d80c8..b752162328 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -278,7 +278,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h
index 5662f6abcd..0cf15ba12a 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -279,7 +279,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h
index f11d83a79f..55c6eae5b1 100644
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index b2e9f1abb3..75c31b3c7a 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index 9d4d839fd3..14525e24db 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index fb73eb7c35..af6a6ce270 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index a02efd75fd..2511c4ebc0 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index 4121954733..9904b4e3ec 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 4ee990890e..95b8e26271 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 35e45e5d33..4901b3af9b 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index 985a21b483..3ee275dcd5 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 7b75702dd1..705110d2ad 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index 3563a32d7e..a33c722304 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h
index ef3d0edfbd..79bcd9d5c1 100644
--- a/config/examples/JGAurora/A1/Configuration.h
+++ b/config/examples/JGAurora/A1/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index 52058a3118..05debc97b0 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -280,7 +280,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h
index 6fa815cf5e..82cc21af47 100644
--- a/config/examples/JGAurora/A5S/Configuration.h
+++ b/config/examples/JGAurora/A5S/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index d894196f8a..e3b16b347a 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -295,7 +295,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h
index 8099a04eac..ab36be8b43 100644
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@@ -280,7 +280,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index 8f27ac386e..2266f7b6be 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index 673e421100..3b72c1171a 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index 226b19c605..17afd2e9a2 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h
index 8beb1267d5..ba14a4a39d 100644
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@@ -276,7 +276,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index 4546f9eb7f..2aa76c9734 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index 9b288a1779..3d5400faeb 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -276,7 +276,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index 77ccabccc8..f83c395016 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index c0e926dfad..15074ccb8a 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index 9ec0adb6bb..6cbd67cb7a 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index 2b8bb8d8ed..bb620689af 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -278,7 +278,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h
index 81ae7966d2..f168ed722d 100644
--- a/config/examples/SCARA/Configuration.h
+++ b/config/examples/SCARA/Configuration.h
@@ -302,7 +302,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index 8687711a66..9eb5eac2c3 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h
index bf04ae1508..a970afeba6 100644
--- a/config/examples/STM32/STM32F10/Configuration.h
+++ b/config/examples/STM32/STM32F10/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h
index 1030c5de0c..3534a7a9ef 100644
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h
index 1c8fab8699..ddbca7a443 100644
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h
index 7bc24ddfb7..b3cd1a6546 100644
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h
index 5a49a1a456..828ddccd0b 100644
--- a/config/examples/Tevo/Michelangelo/Configuration.h
+++ b/config/examples/Tevo/Michelangelo/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h
index 9fe6d69d85..b47a053090 100644
--- a/config/examples/Tevo/Tarantula Pro/Configuration.h
+++ b/config/examples/Tevo/Tarantula Pro/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
index 8ccf0f2bff..c0a78358a6 100644
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
index b5b4415aaa..0bd0430201 100644
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h
index 8b67005467..8f1b82e692 100644
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index 4577e21592..0333a9e1e8 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -297,7 +297,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index 7587d0196a..8e5c4f102a 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index f84631305c..ea466c9848 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h
index 082c1b8947..8c0043b6e6 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@@ -277,7 +277,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index 8db73b707b..57d7e8c80c 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index 8f239d9204..dbde94d3ac 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index 1797736650..8846710748 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index 8460f0d53d..27db75a06d 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index 83b0d7928c..878ebb68d0 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index 99d28567b1..2c37aaaaab 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -295,7 +295,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h
index 9ceca3c911..7832a2f38f 100644
--- a/config/examples/Velleman/K8400/Configuration.h
+++ b/config/examples/Velleman/K8400/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index 9bc4e63978..14c6c8d072 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index 7b9d8c64e8..1eb2fb5148 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -294,7 +294,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index 72b8b30ff8..d586b3cc1e 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
index e5322c1bc5..dcc23dc9c6 100755
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h
index 3d79fefb12..18bc7a6457 100644
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h
index dbd75691d8..ff04d7f17d 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -290,7 +290,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index e588e5fb90..31bfd5491b 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index 09e2077d40..f2d59391a6 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 486e2d63b7..d7d42864ad 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index 6ad6bc0b00..2a995b6a48 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 14c81a8682..7e09164e4f 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -280,7 +280,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index 9fb409414f..b26b120c51 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index ce4ba3af10..7cfa211be0 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index 17a51d4971..45a63ccbae 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index e5e50028de..e73d9559d5 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index 7c3e556c5e..0fbebbb193 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -279,7 +279,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index 802d633d65..117f4bd810 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h
index 75fde8dca5..16a1ed062d 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -280,7 +280,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index fb09aabdd8..9d1a8ab213 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index bc82843b1c..babaf66ead 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h
index 38ab2e4d8d..e0c48c6132 100644
--- a/config/examples/wt150/Configuration.h
+++ b/config/examples/wt150/Configuration.h
@@ -275,7 +275,14 @@
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
- #define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
+ #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
+ //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
+ #if ENABLED(PRIME_BEFORE_REMOVE)
+ #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
+ #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
+ #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
+ #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
+ #endif
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
#define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
#endif
--
GitLab